
1 / 2 · Click to enlarge
At a glance
Made by STMicroelectronics, this pressure sensors is a good fit for makers, students and electronics hobbyists. Main specs: pressure type Absolute; sensor type MEMS piezoresistive digital pressure sensor; output type I2C/SPI. Check that your power source supplies 1.7 V-3.6 V before connecting it.
Key Highlights
- Pressure Type: Absolute
- Sensor Type: MEMS piezoresistive digital pressure sensor
- Output Type: I2C/SPI
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Pressure Type | Absolute |
|---|---|
| Pressure Range | 260 hPa to 1260 hPa |
| Sensor Type | MEMS piezoresistive digital pressure sensor |
| Output Type | I2C/SPI |
| Supply Voltage | 1.7 V-3.6 V |
| Accuracy | +/-0.2 hPa |
| Application | Waterproof wearables and altimeters and IoT and weather stations |
| Weight (Kg) | 0.003 kg |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 2 × 2 × 2 cm |
Overview
The STMicroelectronic LPS25HB Pressure Sensor, 260~1260 hPa, 24-bit, Low Power, I²C/SPI, LGA-10, made by STMicroelectronics, is listed in our pressure sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Pressure Type: Absolute
- Pressure Range: 260 hPa to 1260 hPa (quoted range is usually line-of-sight; walls and interference shorten it)
- Sensor Type: MEMS piezoresistive digital pressure sensor
- Output Type: I2C/SPI
- Supply Voltage: 1.7 V-3.6 V (match this to your power supply; too high a voltage can damage the part)
- Accuracy: +/-0.2 hPa
- Application: Waterproof wearables and altimeters and IoT and weather stations (the IP code tells you how much dust and water the casing keeps out)
- Weight (Kg): 0.003 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The STMicroelectronic LPS25HB is a compact and high-precision digital pressure sensor designed for accurate barometric measurements in portable and embedded systems. Built with a MEMS piezoresistive sensing element, it delivers reliable pressure readings from 260 to 1260 hPa with 24-bit resolution. The sensor integrates temperature compensation and factory calibration, ensuring stable performance across varying environmental conditions.
With ultra-low power consumption as low as 4 µA, it is ideal for battery-powered devices. The device supports both I²C and SPI interfaces for easy integration with microcontrollers. Its embedded FIFO buffer and interrupt features enhance system efficiency by reducing processor load. Packaged in a small HLGA-10 form factor, it is suitable for space-constrained applications like wearables, GPS systems, and weather monitoring devices.
Features:
- Wide pressure range: 260 to 1260 hPa
- High resolution: 24-bit digital output
- Ultra-low power consumption (as low as 4 µA)
- Embedded FIFO buffer (32-slot)
- High-resolution mode: 0.01 hPa RMS noise
- Supports I²C and SPI communication
- Built-in temperature compensation
- High shock survivability up to 10,000 g
Specifications:
- Pressure Range: 260 to 1260 hPa
- Pressure Resolution: 24-bit
- Pressure Noise: 0.01 hPa RMS
- Pressure Sensitivity: 4096 LSB/hPa
- Relative Accuracy: ±0.1 hPa
- Absolute Accuracy: ±0.2 hPa
- Output Data Rate: 1 / 7 / 12.5 / 25 Hz
- Temperature Range: -30°C to +105°C
- Temperature Resolution: 16-bit
- Temperature Accuracy: ±2°C
- Supply Voltage: 1.7V to 3.6V
- Current Consumption: 4 µA (low power), 25 µA (high-res)
- Power-down Current: 0.5 µA
- Interface: I²C, SPI
- FIFO: 32-slot buffer
- Package: HLGA-10 (2.5 × 2.5 × 0.76 mm)
- Shock Resistance: 10,000 g
Package Includes:
1 x STMicroelectronic LPS25HB Pressure Sensor, 260~1260 hPa, 24-bit, Low Power, I²C/SPI, LGA-10
Quick specs
- Pressure Type
- Absolute
- Pressure Range
- 260 hPa to 1260 hPa
- Sensor Type
- MEMS piezoresistive digital pressure sensor
- Output Type
- I2C/SPI
- Supply Voltage
- 1.7 V-3.6 V
- Accuracy
- +/-0.2 hPa



















