
1 / 4 · Click to enlarge
AI Summary
A compact 12V grinding machine for refreshing 18650 lithium battery electrodes and sharpening 3–8 mm spot welding pins. Its 360° rotating grinding action keeps tips evenly dressed for more consistent welds.
Key Highlights
- 360° rotating grinding action dresses pins evenly
- Accepts welding pins from 3 to 8 mm
- Compatible with SUNKKO 75–78 series welding pins
- Suitable for 18650 lithium battery electrodes
- Replaceable grinding covers for different tasks
- Runs on a 12V power supply with 940 g body
Ideal For
- Battery pack builders assembling 18650 packs
- Repair technicians maintaining spot welding equipment
- Hobbyists who weld their own lithium cell packs
- Workshops keeping welding pins in consistent condition
Buying Tip
Check that your existing welding pins fall within the 3–8 mm range and belong to the SUNKKO 75–78 series before ordering, since the machine is specified for those pins.
Elecvora expert review
Our verdict
A focused maintenance tool rather than a general-purpose grinder: the MJ-33 does one job, dressing welding pins and 18650 electrodes, and does it with an even 360° action. If your spot welder runs SUNKKO 75–78 series pins, it removes a recurring source of inconsistent welds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Even 360° grinding action for uniform tips
- Covers the common 3–8 mm pin range
- Replaceable covers extend working life
- Compact 940 g body fits a busy bench
Cons
- Runs only from a 12V supply, so power access matters
- Limited to 18650 electrodes and 3–8 mm pins
- Not a substitute for a full spot welder
Best for
Builders and technicians maintaining SUNKKO 75–78 series welding pins and 18650 electrodes
Not ideal for
Anyone looking for a general-purpose bench grinder or a complete welding station
Specifications
| Model No. / Name | MJ 33 |
|---|---|
| Length (mm) | 130 |
| Weight (g) | 940 |
| Width (mm) | 80 |
| Power Supply Voltage (V) | 12V |
| Compatible Battery | 18650 Lithium Battery |
| Pin Type | 3–8 mm |
| Shipping Weight | 1.427 kg |
| Shipping Dimensions | 28 × 14 × 14 cm |
What's in the box
- 1 × SUNKKO MJ-33 Grinding Machine
- 1 × Grinding disc sleeve
- 1 × Power adapter
- 1 × Welding pin grinding cover
- 1 × Adaptor
- 1 × Manual
Frequently Asked Questions
What can the SUNKKO MJ-33 grind?
Which welding pins does it work with?
What power does it need?
How does the 360° grinding help?
What comes in the package?
How should I look after the machine?
Overview
The SUNKKO MJ-33 is a small grinding machine made for the maintenance side of battery pack work. Instead of replacing worn spot welding pins or working around tired electrodes, you can dress them back into shape on a dedicated unit. The 12V machine measures 130 mm long and 80 mm wide and weighs 940 g, so it sits comfortably on a bench without taking over the workspace.
Its rotating grinding action turns through a full 360° to dress the tip evenly. That evenness is the point: a pin with a flat, consistent contact face transfers current more predictably than one worn to an angle.
Key Features
- 360° rotating grinding: the grinding motion works around the pin for uniform sharpening.
- 3–8 mm pin range: covers the common welding pin sizes used on spot welders.
- SUNKKO 75–78 series compatibility: matches the welding pins from those series.
- 18650 electrode support: built for grinding 18650 lithium battery electrodes as well as pins.
- Replaceable grinding covers: change the cover to suit the job in hand.
- Compact 12V build: a 940 g unit that runs from a 12V power supply.
Specifications Explained
12V power supply: the machine is designed to run from a 12V supply, so check what your adapter and bench setup provide before first use.
3–8 mm pin type: this is the working range for welding pins. Pins at the smaller end of that span are the ones most often re-dressed, while the larger sizes suit heavier welding tips.
130 × 80 mm footprint, 940 g: compact and light enough to move between benches, but with enough mass to stay put while grinding.
Replaceable grinding covers: the cover is the part that meets the work, so being able to swap it extends the machine's working life and lets you keep separate covers for pins and electrodes.
Compatibility and Requirements
The MJ-33 is specified for 18650 lithium battery electrodes and for welding pins in the 3–8 mm range. It is compatible with SUNKKO 75–78 series welding pins. A 12V power supply is required to run it.
Typical Uses
- Dressing spot welding pins before a battery pack build
- Refreshing 18650 cell electrodes during repair work
- Routine maintenance between welding sessions
- Keeping a spare set of pins ready for a production run
What's in the Box
- 1 × SUNKKO MJ-33 grinding machine
- 1 × grinding disc sleeve
- 1 × power adapter
- 1 × welding pin grinding cover
- 1 × adaptor
- 1 × manual



Quick specs
- Model No. / Name
- MJ 33
- Length (mm)
- 130
- Weight (g)
- 940
- Width (mm)
- 80
- Power Supply Voltage (V)
- 12V
- Compatible Battery
- 18650 Lithium Battery


















