Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The SUNKKO T686H is a handheld battery IR tester that measures internal resistance and DC voltage on a dual digital display. It delivers fast readings up to five times per second with PC connectivity for recording results.

Key Highlights

  • Dual digital display shows voltage and resistance simultaneously
  • Resistance range from 1µΩ to 100.0mΩ with 0.001mΩ resolution
  • DC voltage measurement from 0 to ±100V at 0.1mV resolution
  • Fast sampling at up to five readings per second
  • Kelvin four-wire clip supports stable low-resistance testing
  • PC online recording support for logging measurement data

Ideal For

  • Battery service technicians checking cells and packs
  • Electronics lab staff performing routine resistance inspection
  • Hobbyists comparing internal resistance across cells
  • Maintenance teams recording test data on a PC
  • Repair benches that need a portable voltage and resistance meter

Buying Tip

Confirm your test points fall within the 1µΩ to 100.0mΩ resistance and 0 to ±100V DC voltage windows before ordering, since the tester is built around those limits.

Elecvora expert review

Our verdict

The T686H is a focused bench instrument that puts voltage and resistance side by side on one screen, which suits repetitive battery inspection work. Its fine resolution and five-per-second sampling rate make it a practical choice for technicians who compare many cells.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simultaneous voltage and resistance display
  • Fine 0.001mΩ resistance resolution
  • Fast sampling up to five readings per second
  • Kelvin four-wire clip included for stable testing
  • PC online recording support for data logging

Cons

  • Voltage measurement is limited to ±100V DC
  • No battery compatibility list is specified beyond the measurement ranges

Best for

Battery inspection and maintenance work in labs and service benches

Not ideal for

Measuring AC voltage or packs above the ±100V DC limit

Specifications

Model No. / Name686H
ConnectivityPC online recording support
Resolution0.001mΩ / 0.1mV
Item TypeInternal Resistance Tester and Analyzer
Length (mm)164
Weight (g)198
DisplayDual digital display
Voltage Range (V)0~±100V DC
Speed5 times/sec
Width (mm)85
Resistance measure range1µΩ – 100.0mΩ
Resistance1μΩ-100.0mΩ
Voltage Measurement Range0~±100V DC
Shipping Weight0.7 kg
Shipping Dimensions24 × 20 × 6 cm

What's in the box

  • 1 x SUNKKO T686H Battery IR Tester
  • 1 x Four-Wire Test Clip
  • 1 x Test Meter Pen
  • 1 x Charging Cable
  • 1 x Carrying Case
  • 1 x Manual

Frequently Asked Questions

What does the SUNKKO T686H measure?
It measures battery internal resistance from 1µΩ to 100.0mΩ and DC voltage from 0 to ±100V. Both values appear together on the dual digital display.
How fast are the readings?
The tester samples at up to five readings per second, so the display updates quickly as you move between test points.
Can I record measurements on a computer?
Yes. The T686H supports PC online recording, and the included charging cable is used for the computer connection.
What is included with the tester?
The package contains the T686H tester, a four-wire test clip, a test meter pen, a charging cable, a carrying case and a manual.
What resolution does it offer?
Resistance resolution is 0.001mΩ and voltage resolution is 0.1mV, which helps when comparing closely matched cells.
How should I care for the tester?
Keep it in the supplied carrying case between uses, charge it with the included cable and avoid exceeding the ±100V DC voltage limit.

Overview

The SUNKKO T686H is a compact handheld instrument for measuring battery internal resistance and DC voltage. It combines a resistance analyzer and a voltage meter in one body, with a dual digital display that presents both values at once. That layout saves time during inspection work, because you do not need to change modes or reconnect test leads to capture the second reading.

At 198g and 164mm long, the tester is designed to be carried between benches and used in the hand. It is aimed at technicians, lab staff and battery maintenance teams who need repeatable measurements rather than rough estimates.

Key Features

  • Dual digital display: voltage and resistance readings appear together in real time.
  • Fine resolution: 0.001mΩ for resistance and 0.1mV for voltage.
  • Wide measuring windows: 1µΩ to 100.0mΩ resistance and 0 to ±100V DC voltage.
  • Fast sampling: up to five readings per second.
  • Kelvin four-wire testing: the supplied four-wire test clip supports stable low-resistance measurement.
  • PC connectivity: online recording support lets you capture results on a computer.
  • Dynamic range detection: alarm prompts flag conditions outside the expected range.

Specifications Explained

Resistance range and resolution

The 1µΩ to 100.0mΩ window covers the low-resistance measurements typically needed when checking cells and connections. A 0.001mΩ resolution means small differences between readings remain visible, which helps when comparing cells or tracking change over time.

Voltage range

DC voltage measurement spans 0 to ±100V, so the tester can read single cells as well as higher-voltage packs within that limit. The 0.1mV resolution supports detailed voltage checks alongside the resistance value.

Speed and display

Sampling at up to five times per second keeps the display responsive as you move between test points. The dual display removes the need to toggle between voltage and resistance views.

PC recording

With PC online recording support, measurement data can be logged to a computer rather than written down by hand, which is useful for inspection records and repeat testing.

Compatibility and Requirements

The T686H measures DC voltage up to ±100V and resistance from 1µΩ to 100.0mΩ. The supplied four-wire test clip and test meter pen connect the instrument to the item under test. PC recording requires a computer connection using the included charging cable. No further compatibility details are specified.

Typical Uses

  • Checking internal resistance across a batch of cells
  • Comparing voltage readings between packs or modules
  • Battery maintenance and inspection in electronics labs
  • Recording measurement data on a PC for service records
  • Bench testing where a handheld meter is more practical than fixed equipment

What's in the Box

  • 1 x SUNKKO T686H Battery IR Tester
  • 1 x Four-Wire Test Clip
  • 1 x Test Meter Pen
  • 1 x Charging Cable
  • 1 x Carrying Case
  • 1 x Manual

Quick specs

Model No. / Name
686H
Connectivity
PC online recording support
Resolution
0.001mΩ / 0.1mV
Item Type
Internal Resistance Tester and Analyzer
Length (mm)
164
Weight (g)
198
See all specifications