Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Sunny Sky V3506 KV400 is an 84g brushless motor tuned for long-endurance multirotors. Its 400 KV winding and 12N14P stator deliver efficient low-RPM torque for stable, extended flights.

Key Highlights

  • 400 KV winding for efficient low-RPM torque
  • 12N14P stator with 35mm diameter and 6mm thickness
  • Handles up to 315W and 13A continuous for 180 seconds
  • Lightweight 84g body with 41.8mm outer diameter
  • Runs on 20-30A ESCs with 11 to 15 inch propellers
  • Designed for stable, long-duration multirotor flight

Ideal For

  • Builders of long-endurance multirotors
  • Aerial photography drone pilots
  • Inspection and survey drone operators
  • Hobbyists tuning efficient cruise setups
  • Makers using 11 to 15 inch propellers

Buying Tip

Check that your ESC is rated 20-30A and your frame accepts a 41.8mm motor diameter before ordering.

Elecvora expert review

Our verdict

The Sunny Sky V3506 KV400 is a well-judged motor for multirotors that need to stay aloft efficiently. Its low KV and 12N14P stator deliver smooth torque for larger props, though it is not aimed at aggressive freestyle flying.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Efficient low-RPM torque for longer flights
  • Light 84g body with useful 315W peak
  • Flexible propeller range from 11 to 15 inches
  • Works with common 20-30A ESCs

Cons

  • Not designed for high-speed racing or aggressive acro
  • Requires soldering to the ESC
  • Propellers and ESC are not included

Best for

Long-endurance aerial photography and inspection multirotors

Not ideal for

Racing quads and aggressive freestyle builds

Specifications

Motor KV (RPM/V)400 KV
Motor TypeBrushless Motor
Stator Thickness6mm
Stator Diameter35mm
No. of Stator Arms12
No. of Stator Poles14
No-Load Current (A/10V)0.3A/10V
Motor Resistance330mΩ
Continuous Discharge Current (A)13A/180s
Max. Power (W)315W
Weight (g)84
Outer Diameter (mm)41.8
Motor Body Length (mm)18
Required ESC (A)20-30
Recommended Prop(inch)EOLO CN11x4.5, EOLO CN12x5, EOLO CN13x5, EOLO CN15x5.5
Shipping Weight0.183 kg
Shipping Dimensions12 × 9 × 5 cm

What's in the box

  • 1 x Sunny Sky V3506 KV400 Brushless Motor

Frequently Asked Questions

What ESC should I use with this motor?
Use a brushless ESC rated between 20A and 30A. Make sure it is compatible with your flight controller and battery voltage.
Which propellers are recommended?
The motor is recommended for EOLO CN11x4.5, CN12x5, CN13x5 and CN15x5.5 propellers. Choose based on your frame size and desired thrust.
Is this motor suitable for long flight times?
Yes, its 400 KV winding and 12N14P stator are designed for efficient low-RPM operation, which suits long-endurance multirotors when paired with appropriate propellers and ESCs.
What is included in the package?
The package includes one Sunny Sky V3506 KV400 brushless motor. Propellers, ESCs and mounting hardware are not included.
How much power can this motor handle?
It is rated for 13A continuous discharge over 180 seconds and a maximum power of 315W. Exceeding these limits for extended periods may cause overheating.
How should I maintain the motor?
Keep the motor clean and check for loose screws or debris after flights. Inspect the bearings periodically for smooth operation.

Overview

The Sunny Sky V3506 KV400 is a brushless outrunner motor aimed at multirotor builders who prioritize flight time and smooth power delivery. Its 400 KV rating means it turns relatively slowly for each volt applied, which lets larger propellers generate thrust without excessive current draw. The 35mm stator and 12-arm, 14-pole configuration are chosen to produce strong torque at low RPM, so the motor holds efficiency during hovering and gentle cruising rather than only at full throttle.

At 84g, the motor adds little weight to a frame, and the 41.8mm bell diameter keeps it compatible with common motor mounts. It is a sensible option for aerial photography rigs, inspection platforms and other multirotors where predictable, quiet operation matters.

Key Features

  • Efficient low-RPM power: The 400 KV winding and 12N14P stator work together to deliver torque where multirotors need it most.
  • Balanced power budget: Rated for 13A continuous discharge over 180 seconds and up to 315W, giving headroom for steady climbs and hover.
  • Lightweight construction: An 84g motor body helps keep overall craft weight down without sacrificing output.
  • Flexible propeller range: Recommended for EOLO CN11x4.5, CN12x5, CN13x5 and CN15x5.5 propellers, so you can match thrust to your frame.
  • Straightforward ESC pairing: Works with 20-30A electronic speed controllers, a common size for mid-size multirotors.

Specifications Explained

Motor KV (400): Lower KV motors spin larger props more slowly, which typically improves efficiency and flight time. This motor is not intended for high-speed racing builds.

Stator size (35mm diameter, 6mm thickness): A larger stator area generally supports more torque and better heat handling than smaller motors of similar weight.

No-load current (0.3A at 10V) and resistance (330mΩ): These values indicate the motor's baseline draw and internal losses; lower resistance helps reduce heat during sustained operation.

Continuous current (13A for 180s) and max power (315W): These ratings define a sensible operating window. Exceeding them for long periods can overheat the motor.

Weight and dimensions: At 84g with a 41.8mm outer diameter and 18mm body length, the motor suits frames with standard mounting patterns for this size class.

Compatibility and Requirements

Use a 20-30A ESC per motor. Recommended propellers are EOLO CN11x4.5, CN12x5, CN13x5 and CN15x5.5. The motor is a brushless outrunner, so it requires a brushless ESC and a suitable multirotor flight controller. Ensure your frame's motor mounts match the 41.8mm diameter and that your power system can supply the current the motor will draw with your chosen propeller.

Typical Uses

This motor suits long-endurance multirotors, aerial photography platforms, inspection drones and other craft where stable hover and efficient cruise are more important than aggressive acceleration. It is also a reasonable choice for builders experimenting with larger propellers on mid-size frames.

What's in the Box

1 x Sunny Sky V3506 KV400 Brushless Motor.

Sunny Sky V2806

Quick specs

Motor KV (RPM/V)
400 KV
Motor Type
Brushless Motor
Stator Thickness
6mm
Stator Diameter
35mm
No. of Stator Arms
12
No. of Stator Poles
14
See all specifications