Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

SUNNYSKY V4008 KV380 brushless motors are designed for long-endurance multirotors, delivering low-RPM torque and efficient power. Each 105g motor handles up to 500W with a 30-40A ESC.

Key Highlights

  • 380KV winding for efficient low-RPM torque
  • 18-arm, 24-pole stator for smooth power delivery
  • Handles up to 500W continuous with 30-40A ESC
  • Lightweight at 105g per motor
  • Stepped and knurled cap helps secure propellers
  • Japanese EZO bearings for quiet, stable running

Ideal For

  • Long-endurance multirotor builders
  • Aerial photography platform designers
  • Mapping and survey drone projects
  • Pilots using larger propellers for efficiency
  • RC hobbyists building custom multirotors

Buying Tip

Check that your ESC is rated for 30-40A and your propeller choice matches the recommended EOLO sizes before ordering.

Elecvora expert review

Our verdict

The SUNNYSKY V4008 KV380 is a well-judged motor for endurance-focused multirotors, offering a useful balance of low weight, efficient low-RPM torque and a 500W ceiling. Its 18N24P layout and EZO bearings point to smooth, consistent running.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Efficient 380KV winding for larger propellers
  • Lightweight 105g construction
  • Secure stepped and knurled propeller cap
  • Japanese EZO bearings for quiet operation

Cons

  • Requires a 30-40A ESC, which is not included
  • Propeller and mounting hardware not supplied
  • Low KV limits suitability for high-speed acro builds

Best for

Long-endurance multirotor and aerial platform builders

Not ideal for

Pilots seeking high-RPM acrobatic performance

Specifications

Motor KV (RPM/V)380 KV
Motor TypeBrushless Motor
Stator Thickness8mm
Stator Diameter40mm
No. of Stator Arms18
No. of Stator Poles24
No-Load Current (A/10V)0.5A/10V
Motor Resistance131mΩ
Continuous Discharge Current (A)20A/30s
Max. Power (W)500W
Weight (g)105
Outer Diameter (mm)44.3
Motor Body Length (mm)20
Required ESC (A)30-40
Recommended Prop(inch)EOLO CN12x5, EOLO CN13x5, EOLO CN15x5.5, EOLO CN17x6.2
Shipping Weight0.204 kg
Shipping Dimensions12 × 9 × 5 cm

What's in the box

  • 1 x SUNNYSKY V4008 KV380 Brushless Motor

Frequently Asked Questions

What ESC is required for the V4008 KV380?
The motor requires a 30-40A electronic speed controller. Choose one rated for the current your propeller and voltage setup will draw.
Which propellers are recommended?
SUNNYSKY recommends EOLO CN12x5, CN13x5, CN15x5.5 and CN17x6.2 propellers. Select the size that suits your frame and desired flight characteristics.
What is included in the box?
The package contains one SUNNYSKY V4008 KV380 brushless motor. ESCs, propellers and mounting hardware are not included.
Is this motor suitable for long flight times?
Yes, the 380KV winding and 40mm stator are designed to produce efficient torque at low RPM, which supports longer endurance when matched with appropriate propellers and power systems.
How much does each motor weigh?
Each motor weighs approximately 105g, helping keep overall aircraft weight low.
What maintenance does the motor need?
Keep the motor clean and check bearings and propeller mounting regularly. Replace worn bearings if you notice unusual noise or vibration.

Overview

The SUNNYSKY V4008 KV380 is a brushless motor engineered for multirotors that prioritise flight time. Its flat 40mm stator and 380KV winding are tuned to turn larger propellers at lower RPM, extracting useful thrust without wasting energy. At around 105g per motor, it keeps weight in check while offering a 500W maximum power ceiling. The 18-arm, 24-pole configuration contributes to smooth, consistent output, and the stepped, knurled cap design helps hold propellers firmly in place. Japanese EZO bearings are used for quiet, stable rotation. This motor is a sensible option for endurance-focused builds where efficiency and reliability matter.

Key Features

  • Efficient low-RPM power: The 380KV rating and 40mm stator produce torque suited to larger propellers.
  • Stable 18N24P design: Eighteen stator arms and 24 poles support smooth, consistent power delivery.
  • Lightweight construction: At 105g, the motor adds little mass to the airframe.
  • Secure propeller mounting: The stepped, knurled cap design helps prevent propellers from loosening.
  • Quiet bearings: Japanese EZO bearings contribute to stable, low-noise operation.

Specifications Explained

KV rating: 380KV means the motor turns 380 RPM per volt applied, indicating a low-speed, high-torque design for efficient larger-propeller setups.

Stator dimensions: A 40mm diameter and 8mm thickness provide the magnetic area needed for steady torque at low RPM.

Power handling: The motor is rated for 20A continuous discharge (30s) and up to 500W maximum, so it can cope with demanding multirotor duty cycles when paired with a suitable ESC.

Resistance and no-load current: At 131mΩ and 0.5A/10V, the motor is designed to keep resistive losses low during efficient cruise.

Physical size: A 44.3mm outer diameter and 20mm body length keep the motor compact for its class.

Compatibility and Requirements

These motors require a 30-40A electronic speed controller. Recommended propellers are EOLO CN12x5, CN13x5, CN15x5.5 and CN17x6.2, giving builders a range of options for different airframes. Ensure your ESC and power system are rated for the current and power levels the motor will draw in your chosen configuration.

Typical Uses

Ideal for long-endurance multirotors, aerial photography platforms, mapping aircraft and other builds where efficient low-RPM thrust is more important than aggressive acceleration. The motor also suits larger propeller configurations that benefit from the 380KV winding.

What's in the Box

1 x SUNNYSKY V4008 KV380 Brushless Motor.

Sunny Sky V2806

Quick specs

Motor KV (RPM/V)
380 KV
Motor Type
Brushless Motor
Stator Thickness
8mm
Stator Diameter
40mm
No. of Stator Arms
18
No. of Stator Poles
24
See all specifications