
1 / 5 · Click to enlarge
AI Summary
The T-Motor MN4112 KV420 is a 172 g brushless outrunner for multi-rotors, VTOL and fixed wings running on 6S. It pairs a 420 KV winding with centrifugal cooling and IP45 protection for steady thrust on P15x5 propellers.
Key Highlights
- 420 KV winding tuned for 6S multi-rotor and fixed-wing power systems
- Centrifugal cooling design improves airflow across the windings
- IP45 protection against dust ingress and water spray
- Rated 1210 W peak for 180 seconds with 54 A peak current
- 172 g including cable keeps the power train light
- Rotor balanced to under 5 mg for smooth running
Ideal For
- Multi-rotor builders running 6S power systems
- VTOL aircraft designers needing compact outrunner motors
- Fixed-wing pilots using 15-inch propellers
- Makers building airframes in the light-to-mid weight range
Buying Tip
Check your frame clearance and propeller adapter against the 6 mm inner and 4 mm outer shaft before ordering, and confirm your ESC can handle the 54 A peak current.
Elecvora expert review
Our verdict
The MN4112 KV420 is a well-built 6S outrunner with useful cooling and balance details for multi-rotor and fixed-wing work. It rewards builders who match it to the right propeller and ESC rather than pushing it past its 180-second peak rating.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Light 172 g weight including cable
- Centrifugal cooling design and IP45 protection
- Tight rotor balance standard under 5 mg
- High-temperature 220°C class C copper wire
Cons
- Peak power is rated for only 180 seconds
- No package contents confirmed for this listing
- Requires soldering and a suitably rated ESC
Best for
6S multi-rotor, VTOL and fixed-wing builds using 15-inch propellers
Not ideal for
Builders needing a continuous high-power motor or a plug-and-play setup
Specifications
| Motor KV (RPM/V) | 420 KV |
|---|---|
| Motor Size (mm) | 47.4*38.7mm |
| Configuration | 12N14P |
| Shaft Diameter | 6 mm(inner) 4mm (outer) |
| Bearing | 686ZZ/696ZZ |
| Lead Cable | 16AWG*150mm |
| Copper Wire | 220°C high temperature resistance: Level C |
| Coil Insulation Test | 500V/5s |
| Additional Specs. | Centrifugal Cooling Design: Yes |
| Rotor Standard | <5Mg (Dynamic Balance Standard) |
| Protection | IP45 |
| Rated Voltage (VDC) | 6S |
| Idle Current | 1.4A (10V) |
| Recommended Prop(inch) | P15*5" |
| Peak Current(180s) | 54A |
| Weight (g) | 172g (incl. cable) |
| Max. Power (W) | 1210W (180s) |
| Internal Resistance(mOhm) | 60ΜΩ |
| Shipping Weight | 0.334 kg |
| Shipping Dimensions | 13 × 11 × 5 cm |
Frequently Asked Questions
What voltage does the T-Motor MN4112 KV420 run on?
Which propeller is recommended?
What is the peak power and current?
What shaft size does it have?
Is the motor protected against dust and water?
What is included in the box?
Overview
The T-Motor MN4112 KV420 is a brushless outrunner aimed at builders of multi-rotors, VTOL aircraft and fixed wings who want a compact motor with a predictable 6S power envelope. At 172 g including its 16AWG lead cable, it keeps weight low while offering a 1210 W peak rating for 180-second bursts. The 420 KV winding and 12N14P configuration are matched to the recommended P15x5 inch propeller, making this a practical choice for airframes in the light-to-mid weight range.
Key Features
- Centrifugal cooling design: the rotating assembly is shaped to push air over the windings, helping manage heat during sustained throttle.
- IP45 protection: rated against dust ingress and water spray for more confidence in less forgiving environments.
- High-temperature construction: 220°C class C copper wire and a 500V/5s coil insulation test support reliable operation.
- Dynamic balance: the rotor is held to a standard below 5 mg for reduced vibration.
- Dual bearing setup: 686ZZ and 696ZZ bearings support the 6 mm inner and 4 mm outer shaft.
Specifications Explained
420 KV means the motor turns roughly 420 rpm per volt applied, so on a 6S pack it spins fast enough for the P15x5 propeller without excessive current draw. Peak current of 54 A for 180 seconds and 1210 W peak power describe short-burst capability, not a continuous rating, so plan throttle use accordingly. The 60 mOhm internal resistance and 1.4 A idle current at 10 V indicate how efficiently the motor converts electrical input into rotation. The 47.4 x 38.7 mm size and 6 mm inner shaft help you check frame clearance and prop adapter fit before installation.
Compatibility and Requirements
This motor is rated for 6S voltage and is intended for multi-rotor, VTOL and fixed-wing applications. It ships with a 150 mm 16AWG lead cable, so you will need a suitable ESC, battery and propeller matched to your build. The recommended propeller size is P15x5 inch. Confirm that your frame, mount pattern and propeller adapter suit the 6 mm inner and 4 mm outer shaft dimensions before ordering.
Typical Uses
Builders typically use the MN4112 KV420 on multi-rotors, VTOL conversions and fixed-wing platforms where a 6S power system and a 15-inch propeller are appropriate. Its balance and cooling design also make it a reasonable candidate for aircraft that spend long periods at moderate throttle.
What's in the Box
Package contents are not confirmed for this listing. Check the product data or contact support before ordering if you need to know exactly what is included.

Quick specs
- Motor KV (RPM/V)
- 420 KV
- Motor Size (mm)
- 47.4*38.7mm
- Configuration
- 12N14P
- Shaft Diameter
- 6 mm(inner) 4mm (outer)
- Bearing
- 686ZZ/696ZZ
- Lead Cable
- 16AWG*150mm





















