Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The T-Motor MN501-S KV360 is a 360KV brushless motor for industrial UAVs, optimized for 6S LiPo and 17-18 inch propellers. It delivers up to 1000W peak power with high-temperature resistance and precision balancing for reliable, efficient flight.

Key Highlights

  • 360 KV rating for efficient power on 6S LiPo setups
  • Supports 17-18 inch propellers for heavy-lift applications
  • Peak power of 1000W for demanding flight maneuvers
  • 24N28P configuration with imported 696ZZ bearings
  • High-temperature resistance: 180°C magnets, 220°C copper wire
  • Dynamic balance: <10mg motor, <5mg rotor for low vibration

Ideal For

  • Industrial UAV manufacturers building survey drones
  • Professional drone operators needing reliable propulsion
  • Enterprise users requiring 6S power systems
  • Drone enthusiasts building heavy-lift multirotors
  • Agricultural drone designers seeking efficient motors

Buying Tip

Verify your ESC is rated for at least 40A and your frame supports 17-18 inch propellers before purchasing.

Elecvora expert review

Our verdict

The T-Motor MN501-S KV360 is a well-built motor for industrial UAVs, offering a good balance of power, efficiency, and durability. Its high-quality components and precision balancing make it a dependable choice for professional applications.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High power output for its weight
  • Excellent build quality with high-temperature materials
  • Low vibration due to tight balance standards
  • Efficient operation on 6S LiPo

Cons

  • Requires a separate 40A ESC
  • Limited to 6S voltage
  • Propeller compatibility restricted to 17-18 inches

Best for

Industrial and enterprise UAVs requiring reliable, efficient propulsion

Not ideal for

Small FPV drones or applications needing higher KV motors

Specifications

Motor KV (RPM/V)360 KV
Shaft Diameter6 mm (inner), 4 mm (outer)
Configuration24N28P
BearingImported 696ZZ
Magnet Level180°C high temperature resistance
Silicon Cable16AWG x 150MM
Coil Insulation Test500V
Copper Wire220°C high temperature resistance: Level C
Motor Standard&lt;10Mg Dynamic Balance Standard
Rotor Standard&lt;5Mg Dynamic Balance Standard
Idle Current1.4A (at 15V)
Peak Current (A)40A (at 180s )
Max. Power (W)1000w (at 180s)
Rated Voltage (VDC)6s Lipo
Required ESC (A)AIR 40A
Compatible Prop (inch)17-18"
Length (mm)55.6
Width (mm)33.9
Weight (g)175, (Incl. Cable)
Internal Resistance(mOhm)45
Additional Specs.Colorful Engraving (Y/N): Yes
Shipping Weight0.349 kg
Shipping Dimensions13 × 11 × 5 cm

What's in the box

  • 1 x T-Motor MN501-S KV360 motor

Frequently Asked Questions

What battery is required for this motor?
The MN501-S KV360 is designed for 6S LiPo batteries (22.2V nominal). Using other voltages may affect performance or damage the motor.
What ESC should I use?
You need an ESC rated for at least 40A, such as the AIR 40A. Ensure the ESC supports 6S LiPo and is compatible with your flight controller.
What propeller sizes are compatible?
This motor is optimized for 17-18 inch propellers. Using propellers outside this range may reduce efficiency or overload the motor.
Is the motor waterproof?
The product data does not specify a waterproof rating. It is described as dust-resistant and anti-corrosion, but avoid direct exposure to water.
What is included in the package?
The package includes one T-Motor MN501-S KV360 motor. No propeller, ESC, or mounting hardware is mentioned.
How do I maintain the motor?
Keep the motor clean and check bearings periodically. Avoid overheating by ensuring proper cooling and not exceeding the 180-second peak power limit.

Overview

The T-Motor MN501-S KV360 is a brushless motor built for industrial and enterprise unmanned aerial vehicles. It combines a 360 KV rating with a 24N28P stator configuration to deliver efficient, reliable power for professional drone applications. Designed to run on 6S LiPo batteries and compatible with 17-18 inch propellers, this motor is suited for platforms that require sustained performance and durability.

Key Features

  • High power output: Achieves up to 1000W peak power and 40A peak current for 180 seconds, handling demanding flight profiles.
  • Robust construction: Features imported 696ZZ bearings, 180°C high-temperature-resistant magnets, and 220°C class C copper wire for longevity.
  • Precision balancing: Motor dynamic balance under 10mg and rotor under 5mg minimize vibration, contributing to stable flight and clear sensor data.
  • Efficient cooling: The open design and high-quality materials support heat dissipation during extended operation.
  • Durable cabling: 16AWG silicon cable (150mm) offers flexibility and resistance to heat.

Specifications Explained

The 360 KV rating indicates the motor will attempt to spin 360 RPM per volt applied, making it well-matched to 6S LiPo batteries (22.2V nominal) and 17-18 inch propellers for efficient thrust generation. The 24N28P configuration (24 stator teeth, 28 magnet poles) contributes to smooth torque delivery. With a 6mm inner shaft and 4mm outer shaft, it accommodates common prop adapters. The motor weighs 175g including cable, and its compact dimensions (55.6mm length, 33.9mm width) fit many medium-to-large frames. Internal resistance of 45mOhm and idle current of 1.4A at 15V reflect reasonable efficiency for its class. The 500V coil insulation test ensures electrical integrity.

Compatibility and Requirements

This motor requires a 6S LiPo battery and an ESC rated for at least 40A, such as the AIR 40A. It is designed for 17-18 inch propellers. Ensure your frame and propeller choice align with the motor's power characteristics and mounting pattern. The 16AWG silicon cable provides ample current-carrying capacity for the specified 40A peak.

Typical Uses

Ideal for industrial UAVs used in aerial mapping, inspection, agriculture, and surveillance where reliability and efficiency are critical. The motor's power and balancing make it suitable for multirotor platforms that require stable flight and precise control.

What's in the Box

Package includes one T-Motor MN501-S KV360 motor.

Quick specs

Motor KV (RPM/V)
360 KV
Shaft Diameter
6 mm (inner), 4 mm (outer)
Configuration
24N28P
Bearing
Imported 696ZZ
Magnet Level
180°C high temperature resistance
Silicon Cable
16AWG x 150MM
See all specifications