Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A matched pair of 24-inch carbon fiber propellers from T-Motor, rated for 7 to 13 kg of thrust per the manufacturer's specification. The stiff, lightweight blades suit heavy-lift multicopters that need reliable propulsion.

Key Highlights

  • 24-inch diameter with a 7.2-inch pitch for heavy-lift multirotor setups
  • Carbon fiber and epoxy construction keeps each pair at 503.4 g
  • 10 mm center hole fits matching motor shafts and hubs
  • Rated thrust range of 7 kg to 13 kg per T-Motor specifications
  • Optimum operating band of 3020 to 6170 RPM
  • Handles ambient temperatures from -40 °C to 65 °C

Ideal For

  • Heavy-lift multicopter builders using 24-inch propellers
  • Drone operators carrying camera or sensor payloads
  • Large airframe projects needing a matched propeller pair
  • Pilots selecting motors around a 7 to 13 kg thrust target
  • Maintenance teams replacing worn large-format propellers

Buying Tip

Check that your motor shaft or adapter matches the 10 mm center hole and that your motor can spin a 24-inch propeller within the 3020 to 6170 RPM band before ordering.

Elecvora expert review

Our verdict

A well-specified carbon fiber propeller pair for large multicopters, with clear thrust and RPM figures that make motor matching straightforward. It rewards careful balancing and correct hub fit rather than casual swapping.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Carbon fiber and epoxy construction for stiffness
  • Clear 7 to 13 kg thrust and 3020 to 6170 RPM guidance
  • Light 503.4 g pair weight for the size
  • Wide -40 °C to 65 °C ambient range

Cons

  • Requires a matching 10 mm hub or adapter
  • Needs motors and ESCs sized for a 24-inch propeller
  • Not suited to small or acrobatic airframes

Best for

Heavy-lift multicopters needing a matched 24-inch propeller pair

Not ideal for

Small acrobatic quads or builds with non-matching hubs

Specifications

Prop. Diameter (inch)24
MaterialCarbon Fiber+Epoxy
Diameter (mm)609.6
Pitch(inch)7.2inch (182.88mm)
Thrust Limitation7kg to 13 kg
Ambient Temperature (°C)-40 °C ~ 65 °C
Optimum RPM3020 to 6170 RPM
Weight (g)503.4g
Size (mm)646*95*58mm
Storage Temperature (°C)-10 °C ~ 50 °C / <85 %
Shipping Weight0.511 kg
Shipping Dimensions65 × 10 × 6 cm

What's in the box

  • 1 x T-Motor NS24 x 7.2-10mm Hole Propeller pair (2 pieces)

Frequently Asked Questions

What is included in the package?
The package contains one T-Motor NS24 x 7.2-10mm Hole Propeller pair, which is two propellers.
What size motor shaft does it fit?
The propeller has a 10 mm center hole, so it fits motor shafts or adapters that match that diameter.
How much thrust can it produce?
T-Motor specifies a thrust limitation of 7 kg to 13 kg for this propeller.
What RPM range should I target?
The optimum RPM band is 3020 to 6170 RPM. Match your motor and ESC so the propeller runs inside this range.
Can I use it in cold or hot conditions?
The rated ambient operating range is -40 °C to 65 °C. Store the propellers between -10 °C and 50 °C at below 85 % humidity.
Are motors or mounting hardware included?
No. The package contains only the propeller pair, so motors, ESCs, batteries and mounting hardware must be sourced separately.

Overview

The T-Motor NS24 x 7.2 is a two-blade propeller pair made from carbon fiber and epoxy, sized for large multicopters that need substantial lift. At 24 inches (609.6 mm) in diameter with a 7.2-inch (182.88 mm) pitch, the blades are built to move a lot of air at moderate rotational speeds. The set weighs 503.4 g, so the rotating mass stays low for a propeller of this size.

Each propeller has a 10 mm center hole for mounting to a compatible motor shaft or hub. T-Motor specifies a thrust range of 7 kg to 13 kg and an optimum speed band of 3020 to 6170 RPM, giving builders a clear window for motor and ESC selection.

Key Features

  • Carbon fiber and epoxy build: a stiff, scratch-resistant structure that holds shape under load.
  • 24-inch diameter: large swept area for heavy-lift airframes.
  • 7.2-inch pitch: a balanced pitch for thrust and efficiency at the rated speeds.
  • 10 mm hole: a clean fit on matching motor hardware.
  • Wide temperature tolerance: rated for -40 °C to 65 °C ambient operation.

Specifications Explained

Diameter and pitch

The 609.6 mm diameter produces a broad thrust disc, while the 182.88 mm pitch sets how far the blade would advance in one revolution. Together they define the propeller's balance of lift and speed.

Thrust and RPM

The 7 kg to 13 kg thrust limitation and 3020 to 6170 RPM optimum range are the figures to match against your motor and ESC choice. Running inside this band keeps the propeller in its intended operating zone.

Weight and dimensions

At 503.4 g for the pair, the set keeps inertia modest. The packed size is 646 x 95 x 58 mm, and shipping weight is about 0.511 kg.

Storage and environment

Store between -10 °C and 50 °C at below 85 % humidity. Operating ambient range is -40 °C to 65 °C.

Compatibility and Requirements

The 10 mm center hole must match your motor shaft or adapter. Confirm your motor can turn a 24-inch propeller within the 3020 to 6170 RPM band and that your airframe's all-up weight sits inside the 7 kg to 13 kg thrust range. Motors, ESCs, batteries and mounting hardware are not included.

Typical Uses

These propellers suit heavy-lift multicopters carrying cameras, sensors or other payloads, and large airframes where a 24-inch disc is appropriate. They are not intended for small acrobatic quads.

What's in the Box

One T-Motor NS24 x 7.2-10mm Hole Propeller pair (2 pieces).

T Motor NS24 x 7.2-10mm Hole Prop-2PCSPAIR

Quick specs

Prop. Diameter (inch)
24
Material
Carbon Fiber+Epoxy
Diameter (mm)
609.6
Pitch(inch)
7.2inch (182.88mm)
Thrust Limitation
7kg to 13 kg
Ambient Temperature (°C)
-40 °C ~ 65 °C
See all specifications