Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A pair of 17-inch carbon fiber propellers designed for push configuration on co-axial drone frames, offering a 7.6 kg thrust limit and winglet-enhanced efficiency. Each blade weighs only 26 grams and includes a limit rubber ring for abrasion protection.

Key Highlights

  • 17-inch diameter carbon fiber and epoxy construction for rigidity
  • Push configuration specifically for co-axial frame bottom side
  • Optimum RPM range of 3500-6000 for efficient thrust
  • Thrust limitation of 7.6 kg per set
  • Winglet design reduces vortex and radial tension
  • Includes limit rubber ring for abrasion protection

Ideal For

  • Heavy-lift multirotor drone builders
  • Industrial inspection drone operators
  • Agricultural spraying drone technicians
  • Co-axial frame enthusiasts
  • Commercial drone integrators

Buying Tip

Confirm your frame uses a co-axial push configuration and that your motor KV and ESC rating align with the 3500-6000 RPM optimum range before purchasing.

Elecvora expert review

Our verdict

The T-Motor P17 5.8 offers a thoughtful design for co-axial push applications, with winglets and a rubber ring that address common wear and efficiency concerns. It is a solid choice for heavy-lift builds where weight and thrust capacity are critical.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight at 26 g per blade
  • Winglet design reduces vortex and tension
  • Includes limit rubber ring for protection
  • Secure mounting with locknut and extra holes

Cons

  • Limited to push configuration on co-axial frames
  • Requires specific motor and ESC matching for optimal RPM
  • Higher price point for a propeller pair

Best for

Heavy-lift co-axial drone platforms

Not ideal for

Standard tractor-configuration multirotors

Specifications

Prop. Diameter (inch)17
MaterialCarbon Fiber+Epoxy
Optimum RPM3500-6000
Thrust Limitation7.6 kg
Ambient Temperature (°C)40°- 65°c
Weight (g)26 (single blade)
Storage Humidity<85%
Shipping Weight0.242 kg
Shipping Dimensions48 × 8 × 4 cm

What's in the box

  • 1 x T-Motor P17 5.8 Prop-2PCS/PAIR (two propellers)

Frequently Asked Questions

What does 'push configuration' mean for these propellers?
Push configuration means the propellers are designed to be mounted on the bottom side of a co-axial frame, pushing air upward to generate thrust.
Can I use these propellers on a standard (non-co-axial) drone frame?
No, these are specifically intended for push use on the bottom side of a co-axial frame. Using them in a tractor configuration is not recommended.
What is the maximum thrust these propellers can handle?
The thrust limitation is 7.6 kg for the set, as specified by the manufacturer.
What is included in the package?
The package includes one pair of T-Motor P17 5.8 propellers (2 pieces) and a limit rubber ring.
How should I care for these carbon fiber propellers?
Store them in a dry environment with humidity below 85%, inspect for damage before each flight, and use the limit rubber ring to reduce abrasion.
What is the optimum RPM range for these propellers?
The optimum RPM range is 3500-6000, which balances efficiency and thrust production.

Overview

The T-Motor P17 5.8 is a two-piece propeller set built for push configuration on co-axial drone frames. Each propeller measures 17 inches in diameter and is constructed from carbon fiber and epoxy, combining low weight with high stiffness. At just 26 grams per blade, the set helps keep rotational inertia low while still supporting a thrust limitation of 7.6 kg. The design incorporates a downward winglet that works to weaken vortex formation and reduce radial centrifugal tension, contributing to stable and efficient operation across the recommended 3500-6000 RPM range.

Key Features

  • Winglet design: The downward winglet helps diminish vortex strength and reduces deformation under centrifugal load, supporting smoother airflow.
  • Precise positioning: Engineered to avoid sweepback during operation, maintaining consistent blade angle and performance.
  • Secure mounting: Tightened fitted screws and locknut, plus two additional hole sites, improve safety and attachment reliability.
  • Limit rubber ring: Added to protect the propeller from abrasion and provide better shockproof competence during ground contact or handling.
  • Push configuration: Specifically intended for the bottom side of a co-axial frame, where the propeller pushes air upward.

Specifications Explained

17-inch diameter: This larger disc area is suited to multirotor platforms that need to generate substantial lift without extremely high RPM. Optimum RPM 3500-6000: Operating within this band balances thrust output with efficiency and helps avoid excessive stress on the blades. Thrust limitation 7.6 kg: This figure indicates the maximum combined thrust the propeller set is designed to handle, useful when matching propellers to motor and frame capabilities. Carbon fiber + epoxy: This composite material provides a favorable strength-to-weight ratio, contributing to the 26 g per-blade weight. Ambient temperature 40°-65°C: The propellers are rated for operation in warm environments, making them suitable for many outdoor industrial applications. Storage humidity <85%: Recommended storage conditions help preserve the integrity of the composite material over time.

Compatibility and Requirements

These propellers are designed specifically for push use on the bottom side of a co-axial frame. They are not intended for tractor (pull) configuration on standard frames. Mounting requires appropriate screws and locknuts; the set includes a limit rubber ring. Ensure your motor and frame setup can accommodate 17-inch propellers and that the intended thrust does not exceed the 7.6 kg limitation. The optimum RPM range of 3500-6000 should be considered when selecting motors and ESCs.

Typical Uses

This propeller pair is well suited to heavy-lift multirotor drones, industrial inspection platforms, agricultural spraying drones, and other co-axial configurations where efficient thrust generation and reliability are important. The winglet and rubber ring features are particularly beneficial for operations that involve frequent handling or landing on uneven surfaces.

What's in the Box

1 x T-Motor P17 5.8 Prop-2PCS/PAIR (two propellers per pair).

Quick specs

Prop. Diameter (inch)
17
Material
Carbon Fiber+Epoxy
Optimum RPM
3500-6000
Thrust Limitation
7.6 kg
Ambient Temperature (°C)
40°- 65°c
Weight (g)
26 (single blade)
See all specifications