
1 / 4 · Click to enlarge
AI Summary
A matched black and silver pair of quick-attach-detach propeller adapters for 23 to 34 inch props on 70xx-80xx U8 and U12 motors. They let you fit and remove propellers without screw tightening, with colour coding to keep CW and CCW sides correct.
Key Highlights
- Matched CW (black) and CCW (silver) adapters for instant visual identification
- Tool-free attach and detach for faster propeller changes in the field
- Fits 23 to 34 inch propellers with a 10mm prop hole
- 20mm mounting hole PCD and 8mm or 10mm shaft support
- Suited to 70xx-80xx U8 and U12 motors up to 20kg thrust
- Lightweight aluminium construction at roughly 40g per adapter
Ideal For
- Heavy-lift multirotor builders using 70xx-80xx U8 or U12 motors
- Professional aerial photography crews who remove props for transport
- Drone teams that swap 23 to 34 inch propellers frequently in the field
- Workshops maintaining large propeller-driven platforms
Buying Tip
Measure your propeller's centre hole and mounting hole PCD before ordering, since this adapter is specific to a 10mm prop hole and 20mm PCD.
Elecvora expert review
Our verdict
The Q2434 V2 is a focused accessory for large multirotor setups, and the colour-coded CW/CCW pair removes a common source of mounting error. It makes sense for pilots who change 23 to 34 inch propellers regularly and want to skip repeated nut tightening.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear black and silver CW/CCW identification
- Tool-free propeller changes save time in the field
- Lightweight aluminium construction at about 40g
- Covers a broad 23 to 34 inch propeller range
Cons
- Limited to 70xx-80xx U8 and U12 motor classes
- Requires a 10mm prop hole and 20mm mounting hole PCD
- Thrust rating capped below 20kg
Best for
Large multirotor operators who frequently mount and remove propellers
Not ideal for
Small FPV quads or motors outside the 70xx-80xx U8 and U12 families
Specifications
| Prop. Diameter (inch) | 23 to 34 |
|---|---|
| Prop Hole Diameter | 10mm |
| Mounting Hole PCD (mm) | 20mm |
| Shaft Diameter | 8/10mm |
| Motor Rating | 70xx-80xx U8, -U12 |
| Max Thrust | <20Kg |
| Weight (g) | 40 |
| MTBF | 500h |
| Shipping Weight | 0.1 kg |
| Shipping Dimensions | 9 × 6 × 3 cm |
What's in the box
- 1 x T-Motor Q2434 V2 Quick-Attach-Detach Propeller Adapter, CW (black)
- 1 x T-Motor Q2434 V2 Quick-Attach-Detach Propeller Adapter, CCW (silver)
Frequently Asked Questions
Do I need tools to change propellers with this adapter?
How do I know which adapter goes on which motor?
Which propellers and motors does it fit?
What is the maximum thrust rating?
What is included in the package?
How should I care for the adapters?
Overview
The T-Motor Q2434 V2 Quick-Attach-Detach Propeller Adapter is a two-piece set designed to simplify how you fit propellers to large multirotor motors. Instead of threading and tightening nuts every time you change a prop, the adapter lets you seat and release the propeller directly. The pair includes one black adapter for clockwise rotation and one silver adapter for counter-clockwise rotation, giving you an immediate visual cue so the correct propeller goes on the correct motor.
Key Features
- Colour-coded pair: black for CW and silver for CCW helps prevent mounting errors.
- Tool-free operation: attach and detach propellers without screw tightening.
- Aluminium build: a lightweight metal construction that keeps each adapter around 40g.
- Wide propeller range: rated for propellers from 23 to 34 inches in diameter.
- Motor class support: intended for 70xx-80xx U8 and U12 series motors.
Specifications Explained
The 23 to 34 inch propeller diameter range places this adapter in the large-propeller category used by heavy-lift and professional multirotor builds. The 10mm prop hole diameter and 20mm mounting hole PCD define the bolt pattern your propeller hub must match, so check your prop before ordering. Shaft compatibility covers 8mm and 10mm motor shafts. The adapter is rated for motors in the 70xx to 80xx U8 and U12 classes and for thrust loads below 20kg, which keeps it within the intended heavy-lift envelope. Each adapter weighs approximately 40g, and the quoted 500-hour MTBF gives an indication of expected service life under normal use.
Compatibility and Requirements
Use these adapters only with propellers in the 23 to 34 inch range that have a 10mm centre hole and a 20mm mounting hole PCD. The motor must accept an 8mm or 10mm shaft and fall within the 70xx-80xx U8 or U12 families, with thrust kept under 20kg. Confirm the rotation direction of each motor before fitting the black or silver adapter.
Typical Uses
These adapters suit large aerial photography platforms, heavy-lift multirotors and any build where propellers are removed frequently for transport or storage. Keeping a spare set of propellers pre-fitted is easier when the adapter handles the mounting step, which is useful on a flight line or in the workshop.
What's in the Box
The set contains one T-Motor Q2434 V2 adapter in black (CW) and one in silver (CCW).

Quick specs
- Prop. Diameter (inch)
- 23 to 34
- Prop Hole Diameter
- 10mm
- Mounting Hole PCD (mm)
- 20mm
- Shaft Diameter
- 8/10mm
- Motor Rating
- 70xx-80xx U8, -U12
- Max Thrust
- <20Kg




















