Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This audio amplifier module is a good fit for makers, students and electronics hobbyists. Main specs: output power (w) 70; no. of channels 2; model no. / name TDA7377. Check that your power source supplies DC 9-15V/50-100W before connecting it.

Key Highlights

  • Output Power (W): 70
  • No. of Channels: 2
  • Model No. / Name: TDA7377

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Output Power (W)70
No. of Channels2
Model No. / NameTDA7377
Power Supply Voltage (V)DC 9-15V/50-100W
Frequency Response20Hz-20KHz
Dimensions (L x W x H) mm60×56×50
Weight (g)81
Shipping Weight0.085 kg
Shipping Dimensions8 × 5 × 3 cm

Overview

The TDA7377 DC 12V 35W Dual Channel Noiseless High Power Amplifier Board is listed in our audio amplifier module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Output Power (W): 70
  • No. of Channels: 2
  • Model No. / Name: TDA7377
  • Power Supply Voltage (V): DC 9-15V/50-100W (match this to your power supply; too high a voltage can damage the part)
  • Frequency Response: 20Hz-20KHz (make sure the rest of your system works at this frequency)
  • Dimensions (L x W x H) mm: 60×56×50 (measure your mounting space before ordering)
  • Weight (g): 81 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.085 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The TDA7377 is a new technology class AB car radio amplifier able to work either in DUAL BRIDGE or QUAD SINGLE ENDED configuration. The exclusive fully complementary structure of the output stage and the internally fixed gain guarantees the highest possible power performances with an extremely reduced component count. The on-board clip detector simplifies gain compression operation. The fault diagnostics makes it possible to detect mistakes during car radio set assembly and wiring in the car.
Connection Steps:
Connect to speakers:  Connect the two wires of the speakers to the audio output port of the power amplifier, the left channel speaker is connected to the LOUT port of the amplifier and the right channel speaker is connected to the ROUT port, the positive connects to "+", the negative connects to "-". Connect to sound source: Use an audio cable with an end of 3.5mm stereo headphone plug and plugin 3.5 stereo headphone jack of the amplifier. The other end of the audio cable is connected to the audio source (such as computers, mobile phones, MP3, DVD). Connecting to the power supply: Connect to the adapter of power supply: Use the power supply in which the output is above DC12V3A. Connect the output cable of the adapter to the 12V port of the power amplifier board. The positive connects to "+" of the port while the negative connects to "-".
Connect voltage converter: Use the voltage converter in which the output is above AC12V3A. Connect the two output cables of the converter to the 12V port of the power amplifier board. Because the output of the converter is alternating current, it is not positive or negative.
Play music: Plugin the power, the blue power indicator will light up which means that the power amplifier board starts working. You can adjust the volume knob according to their own preferences.

Features:

  1. Powerful 70 W Stereo output Can be accessed by two 4-8Ω 10-50W speakers
  2. A large volume of small size
  3. High signal to noise ratio
  4. Upgraded version of the radiator, wider and thicker, better cooling effect
  5. Fit for Bookshelf speakers, CRT televisions, radios, and other small amplifiers
 

Package Includes:

1 x TDA7377 DC 12V 35W Dual Channel Noiseless High Power Amplifier Board

Quick specs

Output Power (W)
70
No. of Channels
2
Model No. / Name
TDA7377
Power Supply Voltage (V)
DC 9-15V/50-100W
Frequency Response
20Hz-20KHz
Dimensions (L x W x H) mm
60×56×50
See all specifications