Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This audio amplifier module is a good fit for makers, students and electronics hobbyists. Main specs: output power (w) 50; model no. / name TDA7492P; bluetooth version CSR8635 Audio Bluetooth V4.0.. Check that your power source supplies 8 to 24 before connecting it.

Key Highlights

  • Wireless connection
  • Output Power (W): 50
  • Model No. / Name: TDA7492P
  • Bluetooth Version: CSR8635 Audio Bluetooth V4.0.

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Output Power (W)50
Operating Voltage (VDC)8 to 24
Model No. / NameTDA7492P
Bluetooth VersionCSR8635 Audio Bluetooth V4.0.
DC Jack Input5 mm DC jack
Additional Specs.Fixed gain settings: 21.6dB, 27.6dB, 31.1dB and 33.6dB., Headphone Output: 32Ω. Stereo 3.5mm Jack., Compatible Speaker Impedance: 8Ω.
Length (mm)82
Width (mm)50
Weight (g)37
Shipping Weight0.039 kg
Shipping Dimensions8 × 6 × 3 cm

Overview

The TDA7492P 50W Wireless Digital Audio Receiver Amplifier Board is listed in our audio amplifier module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Output Power (W): 50
  • Operating Voltage (VDC): 8 to 24 (match this to your power supply; too high a voltage can damage the part)
  • Model No. / Name: TDA7492P
  • Bluetooth Version: CSR8635 Audio Bluetooth V4.0. (check your phone or controller supports the same Bluetooth version for full range)
  • DC Jack Input: 5 mm DC jack
  • Additional Specs.: Fixed gain settings: 21.6dB, 27.6dB, 31.1dB and 33.6dB., Headphone Output: 32Ω. Stereo 3.5mm Jack., Compatible Speaker Impedance: 8Ω.
  • Length (mm): 82 (measure your mounting space before ordering)
  • Width (mm): 50 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is TDA7492p based is Class-D audio amplifier.  This module has integrated a Bluetooth module, all the used components in the amplifying process, output connectors and control buttons. All you need to do is supply 12V to 36A to it, connect an 8-ohm 50W speaker to each output and connect a Bluetooth device to it and enjoy and control your favourite music wirelessly. In the layout above you can see that the board has 5 control buttons. You can also use those to change the track or control the volume. There is a DIP 2 switches button. Combining the up/down position of each switch you can obtain 4 different filters for the output. In the layout above you can see each combination and the applied gain in each case. This Amplifier has Audio stereo input and connectivity to all versions of the Bluetooth connection, using CSR8635 Bluetooth chip with Bluetooth V4.0. Output Impedance of module is 8 ohms per channel. TDA7492 digital amplifier chip, designed to optimize the circuit layout, the sound quality is very good, big power DIP switches can be adjusted directly after the amp gain more respect and better promote greater damping horn.

Features:

  1. 25 W + 25 W continuous output power at THD = 10% with VCC= 20 V and RL= 8 Ω
  2. Wide-range single-supply operation (8 - 26 V)
  3. High efficiency (η = 90%)
  4. Four selectable, fixed gain settings of nominally 21.6 dB, 27.6 dB, 31.1 dB and 33.6 dB
  5. Differential inputs minimize common-mode noise
  6. Standby and mute features
  7. Short-circuit protection
  8. Thermal overload protection
  9. Externally synchronizable

Package Includes:

1 x TDA7492P 50W Wireless Digital Audio Receiver Amplifier Board

Quick specs

Output Power (W)
50
Operating Voltage (VDC)
8 to 24
Model No. / Name
TDA7492P
Bluetooth Version
CSR8635 Audio Bluetooth V4.0.
DC Jack Input
5 mm DC jack
Additional Specs.
Fixed gain settings: 21.6dB, 27.6dB, 31.1dB and 33.6dB., Headphone Output: 32Ω. Stereo 3.5mm Jack., Compatible Speaker Impedance: 8Ω.
See all specifications