Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact TDA7498E Class-D stereo amplifier board that outputs 2x160W into 4 ohms or 2x100W into 8 ohms from a 36V DC supply. It includes onboard protection circuits and a BTL mono mode for higher single-channel power.

Key Highlights

  • Dual-channel Class-D output: 2x160W into 4 ohms, 2x100W into 8 ohms
  • Runs from a 36V DC supply for full rated output
  • BTL mono mode via J1-J4 pads for 220W into 3 ohms
  • Overvoltage, overcurrent, over-temperature and DC offset protection
  • Heatsink with fan-assisted forced cooling for sustained use
  • Compact 108 x 79 mm board weighing about 180 g

Ideal For

  • DIY audio builders assembling powered speakers
  • Makers building compact home theatre or stereo systems
  • Hobbyists upgrading small PA or monitor setups
  • Electronics learners experimenting with Class-D amplification

Buying Tip

Confirm your chip is the TDA7498E before wiring BTL mono mode, since the TDA7498 and TDA7498L variants do not support bridging.

Elecvora expert review

Our verdict

A practical, efficient stereo amplifier board for builders who want substantial Class-D power in a small footprint. The onboard protection and BTL option add flexibility, but it is a bare module that demands careful power and cooling planning.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Strong per-channel output from a 36V supply
  • Class-D efficiency keeps heat manageable
  • Built-in overvoltage, overcurrent, over-temperature and DC offset protection
  • BTL mono mode for higher single-channel power
  • Compact 108 x 79 mm board

Cons

  • Requires a separate 36V DC power supply
  • Bare board means soldering and enclosure work
  • BTL mode only works on the TDA7498E chip variant

Best for

DIY builders making compact powered speakers or stereo systems

Not ideal for

Plug-and-play users who want a finished amplifier with case and controls

Specifications

Output Power (W)320
Operating Voltage (VDC)36
No. of Channels2
Length (mm)108
Width (mm)79
Weight (g)180
Shipping Weight0.2 kg
Shipping Dimensions16 × 10 × 4 cm

Frequently Asked Questions

What power output does this board provide?
It delivers 2x160W into 4 ohms or 2x100W into 8 ohms from a 36V supply, for a combined 320W across both channels.
What supply voltage do I need?
The board is specified for 36V DC operation. Choose a supply that can deliver the current your output levels require.
How do I use BTL mono mode?
Short the J1, J2, J3 and J4 pads on the back of the board, then use a 3 ohm load with a 36V supply for around 220W. This works only with the TDA7498E chip.
What protection features are included?
The board includes overvoltage, overcurrent, over-temperature and DC offset protection circuits.
What is included in the package?
Package contents are not specified for this listing, so check the product details before ordering.
How should I handle heat during long use?
The board has a heatsink, and fan-forced airflow is supported to keep temperatures controlled during extended high-output sessions.

Overview

The TDA7498E is a dual-channel digital audio amplifier board built around a Class-D amplifier IC. Class-D operation keeps efficiency high and power dissipation low compared with traditional analogue designs, which means less heat to manage inside a small enclosure. The board accepts a 36V DC supply and delivers up to 2x160W into 4 ohm speakers or 2x100W into 8 ohm speakers, giving you real headroom for medium to high-power audio systems.

At roughly 108 x 79 mm and 180 g, it is easy to fit into powered speakers, home theatre builds and compact DIY projects. A heatsink is fitted, and forced airflow from a fan can be added to keep temperatures in check during long, loud sessions.

Key Features

  • Stereo Class-D amplification: two independent channels for left and right output.
  • BTL mono mode: short the J1, J2, J3 and J4 pads on the back of the board to bridge the channels for a single higher-power output.
  • Protection circuits: overvoltage, overcurrent, over-temperature and DC offset detection help protect the board and connected speakers.
  • Flexible audio input: line-level inputs let you connect phones, computers and other audio sources.
  • Low distortion: designed for clean, high-fidelity reproduction with minimal total harmonic distortion and noise.
  • Cooling ready: heatsink fitted, with support for fan-forced heat dissipation.

Specifications Explained

Power and load

The 320W figure is the combined output of both channels. Per channel, expect 160W into a 4 ohm load or 100W into an 8 ohm load when powered at 36V. In BTL mono mode with a 36V supply, the board can deliver around 220W into a 3 ohm load. Note that the TDA7498 and TDA7498L chips do not support this BTL function, so confirm your chip variant before bridging.

Supply voltage

The board is specified for 36V DC operation. Use a supply that can deliver the current your listening levels demand, and keep polarity correct when wiring.

Size and weight

A 108 x 79 mm footprint and 180 g weight make the board suitable for tight enclosures. Shipping weight is listed at 0.2 kg with a 16 x 10 x 4 cm carton.

Compatibility and Requirements

You will need a 36V DC power supply, a suitable heatsink airflow path if you plan to run at high output for long periods, and speakers matched to the load ratings above. Audio sources connect through the line-level inputs. Because the board is a bare module, plan your enclosure, wiring and cooling before installation. Slight variations in colour and components may occur between units.

Typical Uses

  • Powered bookshelf and desktop speakers
  • DIY home theatre and stereo projects
  • Compact PA or monitor builds
  • Bench testing and audio experiments

Quick specs

Output Power (W)
320
Operating Voltage (VDC)
36
No. of Channels
2
Length (mm)
108
Width (mm)
79
Weight (g)
180
See all specifications