
1 / 6 · Click to enlarge
AI Summary
This compact TEA5767 module adds stereo FM radio reception to Arduino, Raspberry Pi, or microcontroller projects via I2C. It includes a detachable antenna and a 3.5mm audio jack for quick integration.
Key Highlights
- TEA5767 single-chip FM tuner covers 76-108MHz
- I2C interface for easy microcontroller control
- Detachable antenna with direct plug-in connection
- 3.5mm audio output jack for headphones or amplifiers
- Reverse polarity protection and power filtering
- Blue LED power indicator for status
Ideal For
- Arduino and Raspberry Pi hobbyists adding FM radio
- Students learning I2C and radio fundamentals
- Makers building portable FM receivers
- DIY audio project builders
- Electronics educators creating hands-on kits
Buying Tip
Confirm your microcontroller supports 5V-tolerant I2C or use level shifting, and check that your region's FM band falls within 76-108MHz before purchasing.
Elecvora expert review
Our verdict
A practical, low-cost FM radio module that is easy to integrate into microcontroller projects thanks to its I2C interface and onboard audio jack. It lacks some refinements like an onboard amplifier, but it delivers reliable stereo reception when paired with a suitable antenna and 5V supply.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple I2C control with minimal wiring
- Detachable antenna included
- Standard 3.5mm audio output
- Reverse polarity protection
- Compact and lightweight
Cons
- Requires an external audio amplifier or headphones
- No onboard volume control
- Limited to 5V operation
Best for
Makers and students adding FM radio to Arduino or Raspberry Pi projects
Not ideal for
Users expecting a complete radio with speaker and controls out of the box
Specifications
| Operating Voltage (VDC) | 5 |
|---|---|
| Model No. / Name | TEA5767 |
| Frequency Response | 76 ~ 108MHz |
| Communication Interface | I2C |
| Additional Specs. | Audio Connector: 3.5mm |
| Length (mm) | 41 |
| Width (mm) | 30.5 |
| Weight (g) | 6 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 4 × 1 cm |
What's in the box
- 1 x TEA5767 Stereo FM Radio Module with Detachable Antenna
Frequently Asked Questions
What microcontroller boards can I use with this module?
What is the operating voltage?
Does it come with an antenna?
How do I listen to the audio?
What frequency range does it cover?
Is the module protected against incorrect power connection?
Overview
The TEA5767 Stereo FM Radio Module is a compact receiver board designed for low-voltage applications. At its core is the TEA5767 single-chip electronically tuned stereo FM radio, which integrates intermediate frequency selectivity and an FM demodulator. This means the module arrives adjustment-free and needs only a few external components to operate. The board measures 41mm by 30.5mm and weighs just 6 grams, so it fits easily into small enclosures or portable projects.
Key Features
- I2C bus communication: Control tuning and settings with just two signal wires plus power and ground.
- Detachable antenna: The included antenna plugs directly into the onboard interface for improved reception.
- 3.5mm audio connector: Output audio to headphones, powered speakers, or an amplifier.
- Reverse polarity protection diode: Helps prevent damage if power is connected incorrectly.
- Power output filtering: Contributes to cleaner audio by reducing power supply noise.
- Blue LED indicator: Shows when the module is powered on.
Specifications Explained
Operating voltage (5V DC): The module is designed for a 5V supply, matching common Arduino and Raspberry Pi logic levels. Frequency range (76-108MHz): Covers the standard FM broadcast band used in many regions, with the lower end also accommodating some extended bands. I2C interface: A widely supported two-wire bus that lets microcontrollers send tuning commands and read status. 3.5mm audio jack: Provides a standard analog stereo output for easy connection to audio equipment. Compact size (41 x 30.5mm, 6g): Lightweight and small enough for embedded installations.
Compatibility and Requirements
The module can be interfaced with Arduino boards, Raspberry Pi, and other microcontrollers that support I2C. You will need a 5V power source and a way to connect the I2C lines (SDA and SCL) to your controller. Audio output is via the 3.5mm jack, so a cable or headphones with a matching plug is required to listen. The detachable antenna connects directly to the onboard antenna interface.
Typical Uses
This module is well suited to adding FM radio to microcontroller projects, building a simple portable FM receiver, creating audio input for a Raspberry Pi media setup, or learning about I2C communication and radio tuning. It can also be used in educational kits and DIY electronics experiments.
What's in the Box
1 x TEA5767 Stereo FM Radio Module with Detachable Antenna.
Quick specs
- Operating Voltage (VDC)
- 5
- Model No. / Name
- TEA5767
- Frequency Response
- 76 ~ 108MHz
- Communication Interface
- I2C
- Additional Specs.
- Audio Connector: 3.5mm
- Length (mm)
- 41













