Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This thermoelectric peltier elements is a good fit for everyday home and hobby use. Main specs: model no. / name TEC1 12706; operating current (a) 6.4; max. power (w) 92.

Key Highlights

  • Model No. / Name: TEC1 12706
  • Operating Current (A): 6.4
  • Max. Power (W): 92

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameTEC1 12706
Operating Current (A)6.4
Max. Power (W)92
Operating Temperature Max138
Internal Resistance (Ohm)1.98
Wire Length(mm)200
Length (mm)40
Width (mm)40
Weight (g)30
Shipping Weight0.033 kg
Shipping Dimensions5 × 5 × 5 cm

Overview

The TEC1-12706 40×40mm 6A Thermoelectric Peltier Cooler is listed in our thermoelectric peltier elements range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: TEC1 12706
  • Operating Current (A): 6.4 (your supply must deliver at least this much current)
  • Max. Power (W): 92
  • Operating Temperature Max: 138
  • Internal Resistance (Ohm): 1.98
  • Wire Length(mm): 200 (measure your mounting space before ordering)
  • Length (mm): 40 (measure your mounting space before ordering)
  • Width (mm): 40 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Looking to cool down your DIY project or any electronic device then you are at the right product. The TEC1 12706 40x40mm Thermoelectric Cooler 6A Peltier Module is the simple application of the Peltier Thermoelectric Effect. The module features 127 semiconductor couples in the area of 40 x 40mm which very effectively cools and heats up to 90°C.

The thermoelectric coolers is also known as TEC or Peltier Module creates a temperature differential on each side. One side gets hot and the other side gets cool. They use to either warm something up or cool something down; above all, you can use either side. You can also take advantage of a temperature differential to generate electricity.

A thermoelectric cooler (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely useful in industrial areas, for example, computer CPUs, CCDs, portable refrigerators, medical instruments, and so on.

Operating Tips:
  1. Max. Operating Temperature: 138 Degree C
  2. Do not exceed Imax or Vmax when operating a module.
  3. Please carry out moisture protection options (sealing) in final application use.
  4. Life expectancy: 200,000 hours
  5. Failure rate based on longtime testings: 0.2%.

Connection Diagram of  TEC1 12706 with Arduino:

Important Note!! The heat side requires a heat sink all the time. “ Do not run this device with a power supply more than a few seconds without a heatsink mounted to the device! ”

To Explore More about Peltier Modules, Click here

Features :

  1. Small module.
  2. Operable up to 138°C.
  3. Easy transition between the hot side to the cool side and vice-versa just by reversing the polarity of the supply.
  4. Quality-tested cooling cells.
  5. Solid-state, vibration-free, noise-free.
  6. Simple to install and operate.
  7. Should use it with a heat sink.

Package Includes:

1 x TEC1 12706 40x40mm Thermoelectric Cooler 6A Peltier Module

Quick specs

Model No. / Name
TEC1 12706
Operating Current (A)
6.4
Max. Power (W)
92
Operating Temperature Max
138
Internal Resistance (Ohm)
1.98
Wire Length(mm)
200
See all specifications