
1 / 4 · Click to enlarge
AI Summary
A dual-MOSFET timing delay switch board that replaces mechanical relays for silent, spark-free control of DC loads from 5 to 36 V at up to 15 A. It offers multiple programmable timing modes with automatic saving and an emergency stop key.
Key Highlights
- Dual MOSFET parallel drive for low resistance and high current
- Wide 5-36 VDC input suits many DC devices
- Up to 15 A continuous and 400 W power rating
- Silent switching with no spark or EMI
- Multiple timing modes with independent saved parameters
- Emergency stop key and reverse polarity protection
Ideal For
- Makers and hobbyists building DC automation projects
- Technicians replacing relay modules in low-voltage systems
- Users controlling motors, pumps, or valves with timing logic
- DIY enthusiasts adding delayed or cycling switching
- Anyone needing silent, spark-free DC load control
Buying Tip
Confirm that your load's continuous current stays below 15 A and its power below 400 W, and remember that the board only switches DC, not AC mains.
Elecvora expert review
Our verdict
A solid, compact MOSFET-based timing module that offers flexible control for DC loads without the noise and wear of mechanical relays. It is well suited to hobbyist and light industrial applications where silent, repeatable switching is important.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Silent, spark-free operation with no EMI
- Wide 5-36 VDC input range
- Multiple timing modes with saved settings
- Reverse polarity protection and emergency stop
Cons
- Limited to DC loads only, not AC mains
- Requires separate power supply and wiring
- No enclosure or mounting hardware included
Best for
DC automation projects needing timed switching
Not ideal for
AC mains switching or high-power loads above 400 W
Specifications
| Operating Voltage (VDC) | 5 to 36 |
|---|---|
| Quiescent Current | 20mA |
| Operating Current (mA) | 50mA |
| Operating Current (A) | 30 A |
| Operating Temperature (°C) | -40 - 85 ºC |
| Continuous Discharge Current (A) | 15A |
| Power Rating | 400W |
| Width (mm) | 34 |
| Weight (g) | 18 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 10 × 7 × 3 cm |
What's in the box
- 1 x Timing Delay Switch Circuit with Double MOSFET Control Board
Frequently Asked Questions
Can this module switch AC mains voltage?
What is the maximum load I can connect?
Does the module remember settings after power off?
What is included in the package?
How do I use the emergency stop function?
What is sleep mode and how does it work?
Overview
The Generic Timing Delay Switch Circuit with Double MOSFET Control is a compact control board designed to replace electromagnetic relays in DC switching applications. Instead of mechanical contacts, it uses two MOSFETs in parallel to deliver fast, silent turn-on and turn-off with no sparking and no electromagnetic interference. The board accepts a wide operating voltage from 5 to 36 VDC, making it adaptable to many common DC power setups. With a continuous discharge current rating of 15 A and a power rating of 400 W, it can handle moderately demanding loads such as DC motors, LED arrays, micro-pumps, and solenoid valves. All timing parameters are set independently and saved automatically, so your configuration is retained even after the module is powered down.
Key Features
- Dual MOSFET parallel drive: Lower resistance and higher current capacity than a single device, supporting up to 15 A continuous.
- Wide voltage input: Operates from 5 to 36 VDC, covering many low-voltage DC devices.
- Silent, spark-free switching: No mechanical contacts means no noise, no sparks, and no electromagnetic interference.
- Multiple timing modes: Includes delayed on, delayed off, cycling, and signal-hold modes with independently adjustable OP, CL, and LOP parameters.
- Emergency stop key: A dedicated STOP button for immediate shutdown.
- Reverse polarity protection: Helps prevent damage if power is connected incorrectly.
- Sleep mode: Automatically turns off the display after 5 minutes of inactivity; any key wakes it.
- Parameter memory: Settings are saved automatically and survive power loss.
Specifications Explained
Operating voltage (5-36 VDC): The board can be powered from a wide range of DC sources, so it fits many hobby and industrial setups without extra regulation. Quiescent current (20 mA): The board draws very little current when idle, which is helpful for battery-powered projects. Operating current (50 mA): The control electronics consume about 50 mA during normal operation, separate from the load current. Continuous discharge current (15 A): This is the maximum current the MOSFETs can handle continuously; ensure your load stays within this limit. Power rating (400 W): At higher voltages, the maximum current may be limited by the power rating, so check both current and power against your load. Operating temperature (-40 to 85 °C): Suitable for use in a wide range of environments, from cold outdoor enclosures to warm equipment cabinets.
Compatibility and Requirements
The board works with DC loads that operate within its 5-36 VDC range and do not exceed 15 A continuous or 400 W. It is not intended for AC mains switching. A suitable DC power supply and wiring are required; these are not included. The module is designed as a direct replacement for relay-based control in low-voltage DC systems, but always verify that your load's voltage and current fall within the stated limits.
Typical Uses
- Controlling DC motors and micro-pumps with adjustable run times
- Switching LED lighting strips and arrays
- Operating solenoid valves in automated systems
- Adding delayed on/off or cycling behavior to DC equipment
- DIY automation and hobby projects requiring silent, reliable switching
What's in the Box
Package includes one Timing Delay Switch Circuit with Double MOSFET Control Board. No additional accessories, power supply, or wiring are included.
Quick specs
- Operating Voltage (VDC)
- 5 to 36
- Quiescent Current
- 20mA
- Operating Current (mA)
- 50mA
- Operating Current (A)
- 30 A
- Operating Temperature (°C)
- -40 - 85 ºC
- Continuous Discharge Current (A)
- 15A













