Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Interface Module; shipping weight 0.01 kg.

Key Highlights

  • Model No. / Name: Interface Module
  • Shipping Weight: 0.01 kg

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameInterface Module
Shipping Weight0.01 kg
Shipping Dimensions8 × 5 × 2 cm

Overview

The TJA1050 CAN Controller Bus Driver Interface Module is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Interface Module (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 8 × 5 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

TJA1050 CAN Controller Bus Driver Interface Module is the interface between the Controller Area Network (CAN) protocol controller and the physical bus. The device provides differential transmit capability to the bus and differential receive capability to the CAN controller. The TJA1050 is the third Philips high-speed CAN transceiver after the PCA82C250 and the PCA82C251. The most important differences are:
  • Much lower electromagnetic emission due to optimal matching of the output signals CANH and CANL
  • Improved behavior in case of an unpowered node
  • No standby mode.
This makes the TJA1050 eminently suitable for use in nodes that are in a power-down situation in partially powered networks. Note : HW-021 on module working remains same.

Specifications and Features:

  1. Onboard TJA1050 CAN controller interface chip
  2. Chip commonly used pin has led, convenient connection to use
  3. Pin 5 v to the power supply
  4. PCB board size: 22 (mm) x11.5 (mm)
  5. Fully compatible with the ISO 11898 standard
  6. High speed (up to 1 Mbaud)
  7. Very low Electro-Magnetic Emission (EME)
  8. Differential receiver with wide common-mode range for high Electro-Magnetic Immunity (EMI)
  9. An unpowered node does not disturb the bus lines
  10. Transmit Data (TXD) dominant time-out function
  11. A silent mode in which the transmitter is disabled
  12. Bus pins protected against transients in an automotive environment
  13. Input levels compatible with 3.3 V and 5 V devices
  14. Thermally protected
  15. Short-circuit proof to the battery and to ground

Package Includes:

1 x TJA1050 CAN Controller Bus Driver Interface Module

Quick specs

Model No. / Name
Interface Module
Shipping Weight
0.01 kg
Shipping Dimensions
8 × 5 × 2 cm
See all specifications