Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The TLP281 4-Channel Opto-Isolator Module provides four independent isolation channels to protect microcontrollers from high-voltage spikes and noise. It supports both 3.3V and 5V logic, making it easy to integrate with popular boards like Arduino and Raspberry Pi.

Key Highlights

  • Four independent TLP281 optocoupler channels for multi-signal isolation
  • 2500V isolation voltage protects against spikes and ground loops
  • Works with 3.3V and 5V logic levels for broad compatibility
  • Compact 26 x 26 mm board with standard pin headers
  • Tool-free installation and easy replacement
  • Collector-emitter voltage up to 80V for flexible output interfacing

Ideal For

  • Electronics hobbyists building Arduino or Raspberry Pi projects
  • Engineers working on industrial automation and PLC interfaces
  • Makers needing to isolate signals in noisy environments
  • Students learning about optocouplers and signal isolation
  • Anyone interfacing microcontrollers with higher-voltage circuits

Buying Tip

Check that your input signals do not exceed the 50 mA maximum input current per channel; use series resistors if necessary.

Elecvora expert review

Our verdict

The TLP281 4-Channel Opto-Isolator Module offers a straightforward and effective way to add electrical isolation to microcontroller projects. Its four independent channels and wide voltage compatibility make it a versatile tool for both beginners and experienced users.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Four independent channels in a compact board
  • High 2500V isolation voltage
  • Wide operating voltage range (2.7V to 5.5V)
  • Tool-free installation with standard headers
  • Good current transfer ratio range

Cons

  • Input current limit requires careful resistor selection
  • No mounting holes or enclosure included
  • Documentation not provided; users must rely on pin labels

Best for

Makers and engineers needing multi-channel signal isolation

Not ideal for

High-power switching applications without additional drivers

Specifications

Item Type4-Channel Opto-Isolator
Isolation Voltage2500V
Channels4 Independent Channels
Collector-Emitter Voltage (V)80
Current transfer ratio50% to 600%
Input current (mA)50 (Max)
Output Type-55 to +110
Length (mm)26
Width (mm)26
Weight (g)02
Operating Voltage (V)2.7~5.5
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.005 kg
Shipping Dimensions5 × 3 × 2 cm

What's in the box

  • 1 x TLP281 4-Channel Opto-Isolator Module

Frequently Asked Questions

What is the maximum input current per channel?
The maximum input current is 50 mA per channel. Exceeding this may damage the optocoupler, so use appropriate series resistors.
Can I use this module with a 3.3V system?
Yes, the module operates from 2.7V to 5.5V, so it is compatible with both 3.3V and 5V logic systems.
What is the isolation voltage?
The module provides an isolation voltage of 2500V between input and output sides.
What is included in the package?
The package includes one TLP281 4-Channel Opto-Isolator Module.
How do I connect the output to a relay?
Connect the output transistor in series with the relay coil and a suitable power supply, observing the 80V collector-emitter limit. Use a flyback diode across the relay coil to protect against voltage spikes.
Is soldering required?
The module comes with standard pin headers, so you can use it with a breadboard or jumper wires without soldering. However, for permanent installations, you may need to solder connections.

Overview

The TLP281 4-Channel Opto-Isolator Module is a signal isolation board built around four independent TLP281 optocouplers. It is designed to safely connect microcontrollers and other low-voltage logic devices to high-voltage or electrically noisy circuits. By providing complete electrical isolation between input and output stages, the module helps protect sensitive control systems from voltage spikes, surges, and ground loop interference. Whether you are working on industrial automation, PLC interfaces, relay driving, or motor control, this compact board offers a reliable way to isolate multiple signals in one module.

Key Features

  • Four Independent Channels: Each channel uses a separate TLP281 optocoupler, allowing you to isolate multiple signals simultaneously without interference between channels.
  • High Isolation Protection: With an isolation voltage of 2500V, the module provides robust protection for your low-voltage electronics.
  • 3.3V and 5V Logic Compatible: The module operates from a supply voltage of 2.7V to 5.5V, making it suitable for popular platforms such as Arduino, ESP32, Raspberry Pi, and STM32 boards.
  • Noise and Ground Loop Protection: By breaking electrical connections between input and output, the module prevents voltage spikes and ground loop currents from damaging your control circuits.
  • Compact and Easy to Integrate: The small 26 x 26 mm board features standard pin headers for quick installation and tool-free replacement.

Specifications Explained

Isolation Voltage (2500V): This rating indicates the maximum voltage the module can withstand between its input and output sides without breakdown. It is a key safety parameter for interfacing with higher-voltage circuits.

Channels (4 Independent): Four separate optocouplers mean you can isolate four distinct signals at once, which is ideal for multi-channel control systems.

Collector-Emitter Voltage (80V): The output phototransistor can handle up to 80V across its collector and emitter, giving you flexibility when connecting to various loads or voltage levels.

Current Transfer Ratio (50% to 600%): This wide range indicates the ratio of output current to input current. A higher CTR means the output transistor conducts more current for a given input current, which can be useful for driving loads.

Input Current (50 mA Max): The maximum current you should feed into each input channel. Exceeding this could damage the optocoupler, so use appropriate series resistors.

Operating Voltage (2.7V to 5.5V): The module can be powered from a wide range of logic-level supplies, ensuring compatibility with both 3.3V and 5V systems.

Compatibility and Requirements

The module is designed to work with microcontrollers and development boards that operate at 3.3V or 5V logic levels. It is compatible with popular platforms such as Arduino, ESP32, Raspberry Pi, and STM32. No special drivers or software are required; simply connect the input pins to your control signals and the output pins to your target circuit. The module requires an external power supply within the 2.7V to 5.5V range.

Typical Uses

  • Protecting microcontroller inputs from high-voltage signals
  • Isolating signals in PLC and industrial automation systems
  • Driving relays or motors with electrical isolation
  • Interfacing sensors or switches in noisy environments
  • Multi-channel signal isolation for data acquisition

What's in the Box

1 x TLP281 4-Channel Opto-Isolator Module

Quick specs

Item Type
4-Channel Opto-Isolator
Isolation Voltage
2500V
Channels
4 Independent Channels
Collector-Emitter Voltage (V)
80
Current transfer ratio
50% to 600%
Input current (mA)
50 (Max)
See all specifications