Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact TPA3110 mono amplifier board that outputs up to 30W from an 8-26V DC supply. Its small 44 x 30 mm footprint makes it easy to fit into DIY speaker and audio projects.

Key Highlights

  • TPA3110 chip in PBTL mono configuration for single-channel amplification
  • Up to 30W output from a DC supply between 8V and 26V
  • Works with 4, 6 or 8 ohm speakers; 8 ohm recommended
  • Compact 44 x 30 x 10 mm board weighs only 10 g
  • Suits DIY Bluetooth speakers, home audio and car audio modifications

Ideal For

  • DIY audio builders making Bluetooth or portable speakers
  • Electronics hobbyists needing a compact mono amplifier
  • Makers modifying home audio systems
  • Car audio enthusiasts working on custom installations
  • Repairers replacing a small mono amplifier module

Buying Tip

Confirm your speaker impedance and available DC supply fall within the board's 4/6/8 ohm and 8-26V limits before ordering, and choose an 8 ohm speaker for the most stable match.

Elecvora expert review

Our verdict

A practical, low-cost mono amplifier board for compact DIY audio builds where 30W and a wide DC input range are useful. It is simple to integrate but requires basic wiring skills and an external power supply.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 44 x 30 x 10 mm size fits small enclosures
  • Wide 8-26V DC operating range
  • Supports 4, 6 and 8 ohm speakers
  • Lightweight at around 10 g
  • Simple mono PBTL layout

Cons

  • Mono only, so stereo needs two boards
  • Power supply and wiring not included
  • Requires soldering or terminal wiring skills

Best for

DIY builders making compact mono speaker projects

Not ideal for

Users wanting a plug-and-play stereo amplifier

Specifications

Output Power (W)30
Operating Voltage (VDC)8 to 26
No. of Channels1
Model No. / NameTPA3110
Dimensions (L x W x H) mm44 x 30 x 10
Weight (g)10
Shipping Weight0.015 kg
Shipping Dimensions5 × 3 × 2 cm

What's in the box

  • 1 x TPA3110 Mono Channel Digital Amplifier Board 30W Power Amplifier Module

Frequently Asked Questions

What power supply does this amplifier board need?
It requires a DC supply between 8V and 26V. The power supply is not included, so choose one that fits your project and stays within that range.
Which speakers can I use with this board?
You can use 4, 6 or 8 ohm speakers. An 8 ohm speaker is recommended for the most stable match.
Is this a stereo amplifier?
No, it is a single-channel mono amplifier. For stereo audio you would need two boards or a different module.
What is included in the package?
The package contains one TPA3110 Mono Channel Digital Amplifier Board. Power supply, speaker and wiring are not included.
How much power does it output?
The board is rated for up to 30W on its single channel, depending on the supply voltage and speaker used.
How should I care for the board?
Keep it dry, avoid exceeding the 8-26V input range, and ensure adequate ventilation during use to prevent overheating.

Overview

The TPA3110 Mono Digital Amplifier Board is a single-channel amplifier module designed around the TPA3110 chip. It provides one channel of amplification with a rated output of up to 30W, powered from a DC supply ranging from 8V to 26V. The board uses a PBTL mono configuration, which keeps the circuit simple and makes it a practical choice for compact audio builds.

At only 44 x 30 x 10 mm and roughly 10 g, the module is small enough to tuck into portable speaker housings, custom enclosures or equipment modifications. It is aimed at DIY builders, electronics hobbyists and anyone who needs a reliable mono amplifier block without a large footprint.

Key Features

  • TPA3110 amplifier chip in a mono PBTL layout for straightforward single-channel audio.
  • 30W output power to drive a suitable speaker for everyday listening projects.
  • Wide 8-26V DC operating range allows use with many common DC power sources within that window.
  • Speaker impedance support for 4, 6 or 8 ohm loads, with 8 ohm giving the most stable match.
  • Compact dimensions of 44 x 30 x 10 mm and a light 10 g weight for space-limited builds.

Specifications Explained

Output power (30W): This is the module's rated single-channel output. It is enough for small to medium speaker projects where a mono signal is required.

Operating voltage (8-26V DC): The board needs a DC supply within this range. Staying inside the stated window is important; the exact power supply is not included, so you will need to provide one that matches your project.

Number of channels (1): This is a mono amplifier, so it drives one speaker. For stereo you would need two boards or a different module.

Speaker impedance (4/6/8 ohm): The module can work with any of these impedances, but 8 ohm is recommended for the most stable operating condition.

Size and weight: At 44 x 30 x 10 mm and 10 g, the board is easy to mount in tight spaces and adds very little weight to portable designs.

Compatibility and Requirements

To use the board you need a DC power source within the 8-26V range and a mono speaker rated at 4, 6 or 8 ohm. An 8 ohm speaker is the recommended match. Audio input and speaker connections are made to the board's terminals; wiring and connectors are not supplied. The module does not include a power supply, enclosure or mounting hardware.

Typical Uses

  • Building a DIY Bluetooth speaker with a mono output stage.
  • Modifying or upgrading home audio equipment that uses a single channel.
  • Car audio projects where a compact mono amplifier is needed.
  • General electronics projects requiring a small 30W amplifier module.

What's in the Box

1 x TPA3110 Mono Channel Digital Amplifier Board 30W Power Amplifier Module.

Quick specs

Output Power (W)
30
Operating Voltage (VDC)
8 to 26
No. of Channels
1
Model No. / Name
TPA3110
Dimensions (L x W x H) mm
44 x 30 x 10
Weight (g)
10
See all specifications