Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact TPA3116D2 class D mono amplifier board delivering up to 60W with a 100dB SNR. Its small 92.5 x 69mm footprint and 12-24V supply range make it easy to drop into DIY audio and car sound projects.

Key Highlights

  • TPA3116D2 class D chip for efficient single-channel amplification
  • Up to 60W output for driving a mono speaker setup
  • 100dB signal-to-noise ratio for clean, low-noise audio
  • Compact 92.5 x 69mm board weighing about 70g
  • Onboard front-facing IC improves input sensitivity
  • Runs from a 12V to 24V DC power supply

Ideal For

  • DIY audio builders assembling compact mono speaker systems
  • Car audio hobbyists adding a small amplifier channel
  • Makers integrating amplified sound into enclosures
  • Repairers replacing a failed amplifier module
  • Students learning class D amplifier wiring

Buying Tip

Check that your DC supply sits within the 12V to 24V range and can deliver enough current for your speaker before wiring the board.

Elecvora expert review

Our verdict

A tidy, compact mono amplifier board that pairs the TPA3116D2 chip with a 100dB SNR and a flexible 12-24V supply range. It suits builders who want a small, efficient amplification stage without a large enclosure.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 92.5 x 69mm footprint at about 70g
  • 100dB SNR supports clean audio
  • Efficient TPA3116D2 class D design
  • Flexible 12V to 24V supply range
  • Onboard front-facing IC for input sensitivity

Cons

  • Bare board requires wiring and soldering
  • Single channel only, not stereo
  • Power supply and speaker not included

Best for

Compact DIY mono audio and car sound projects

Not ideal for

Listeners wanting a plug-and-play stereo amplifier

Specifications

Output Power (W)60
Model No. / NameXH M543
Signal to noise ratio (SNR)100dB
Length (mm)92.5
Width (mm)69
Weight (g)70
Shipping Weight0.225 kg
Shipping Dimensions7 × 5 × 2 cm

What's in the box

  • 1 x TPA3116D2 XH-M543 60W Single Channel High Power Digital Power Amplifier Board

Frequently Asked Questions

What is the output power of this amplifier board?
The board is rated for up to 60W on a single channel. Actual output depends on your supply voltage and speaker.
What power supply does it need?
It operates from a DC supply between 12V and 24V. Choose a supply that can deliver enough current for your speaker and listening level.
Is this a stereo or mono amplifier?
It is a single-channel, mono amplifier board. It drives one speaker channel.
Does it come with a power supply or speaker?
No. The package includes the amplifier board only, so you will need to supply power and a speaker separately.
Do I need to solder to use it?
Yes, it is a bare board, so plan for wiring and soldering your power, input, and speaker connections.
How should I care for the board?
Keep it dry, avoid shorting the connections, and make sure it has adequate ventilation during use.

Overview

The TPA3116D2 XH-M543 is a single-channel digital power amplifier board designed for builders who need a compact, efficient way to add amplified audio to a project. At its core is the TPA3116D2 class D amplifier chip, rated for up to 60W output. The board measures 92.5mm by 69mm and weighs roughly 70g, so it fits into tight spaces inside small enclosures, vehicle installations, and desktop audio builds.

With a 100dB signal-to-noise ratio and an onboard front-facing IC that improves input sensitivity, the module is aimed at delivering clear sound from a range of audio sources. It is a bare board, so it is best suited to users who are comfortable with wiring, soldering, and basic electronics assembly.

Key Features

  • TPA3116D2 class D chip: a digital amplifier design known for efficient operation and low idle loss.
  • 60W single-channel output: one amplified channel for mono speaker projects.
  • 100dB SNR: supports clean audio reproduction with low background noise.
  • Front-facing IC: onboard placement designed to improve input sensitivity.
  • Compact size: 92.5 x 69mm board at about 70g for space-limited builds.
  • 12V to 24V supply range: flexible powering from a suitable DC source.

Specifications Explained

Output power

The 60W rating describes the board's maximum single-channel output. In practice, the power you can achieve depends on the supply voltage you provide and the speaker you connect, so match both carefully for the best result.

Signal-to-noise ratio

A 100dB SNR means the amplified signal stays well above the board's noise floor, which helps keep quiet passages and detailed audio free from audible hiss.

Board dimensions and weight

At 92.5mm long, 69mm wide, and around 70g, the module is small enough for compact housings and light enough not to strain mounting points.

Power supply

The board operates from a 12V to 24V DC supply. Choose a power source that can deliver the current your chosen speaker and listening level demand.

Compatibility and Requirements

This is a single-channel amplifier board, so it drives one speaker channel. It requires a DC power supply within the stated 12V to 24V range and a suitable audio source connected to its input. Because it is supplied as a bare board, plan for wiring and soldering, and confirm your speaker's impedance and power handling suit the output you intend to use.

Typical Uses

  • DIY mono speaker and desktop audio builds
  • Car and vehicle audio projects
  • Computer and multimedia speaker upgrades
  • Home audio and video setups needing a compact amp
  • Maker and hobby electronics projects

What's in the Box

1 x TPA3116D2 XH-M543 60W Single Channel High Power Digital Power Amplifier Board.

Quick specs

Output Power (W)
60
Model No. / Name
XH M543
Signal to noise ratio (SNR)
100dB
Length (mm)
92.5
Width (mm)
69
Weight (g)
70
See all specifications