
1 / 3 · Click to enlarge
AI Summary
The TSOP38238 is a 38 kHz IR receiver diode that demodulates remote control signals into a digital output for microcontrollers. Its low power draw and wide 2.5–5.5 V supply make it easy to integrate into any project.
Key Highlights
- 38 kHz center frequency matches most consumer IR remotes
- Wide 2.5–5.5 V supply works with 3.3 V and 5 V systems
- Low supply current of 350 µA for battery-friendly designs
- 45-degree viewing angle for flexible placement
- Integrated preamplifier and IR filter in one package
- Pack of two for spares or dual-receiver setups
Ideal For
- Arduino and Raspberry Pi enthusiasts adding IR control
- Electronics hobbyists building universal remote decoders
- Students learning about infrared communication
- Makers creating custom home automation interfaces
- Engineers prototyping optical switch designs
Buying Tip
Check that your remote uses a 38 kHz carrier frequency; most do, but some use 36 kHz or 40 kHz and may not work reliably.
Elecvora expert review
Our verdict
The TSOP38238 is a reliable, well-known IR receiver that simplifies remote control integration thanks to its integrated demodulator and wide voltage range. It is an excellent choice for hobbyists and professionals who need a straightforward IR solution.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated filter and preamplifier reduce external components
- Low power consumption suits battery-powered projects
- Wide supply voltage range accommodates 3.3 V and 5 V systems
- Robust immunity to ambient light and EMI
Cons
- Requires soldering or a breadboard for connection
- Only works with 38 kHz carrier remotes
- Limited to 45-degree reception angle, may need multiple units for wide coverage
Best for
Microcontroller users needing a simple IR remote interface
Not ideal for
Projects requiring wide-angle or long-distance IR reception
Specifications
| Item Type | Sensor |
|---|---|
| Model No. / Name | TSOP38238 |
| Supply Voltage | 2.5 ~ 5.5 |
| Frequency (kHz) | 38 kHz |
| Beam Angle | 45 deg |
| Viewing Angle (Deg.) | 45 deg |
| Max. Operating Current (A) | 5 mA |
| Supply Current | 350 uA |
| Current Dissipation (mA) | 10 mW |
| Operating Temperature (°C) | -25 ~+85 |
| Shipping Weight | 0.006 kg |
| Shipping Dimensions | 5 × 5 × 3 cm |
What's in the box
- 2 x TSOP38238 IR Receiver Diode
Frequently Asked Questions
What is the TSOP38238 used for?
Can I use it with a 3.3 V microcontroller?
Does it work with any IR remote?
What is included in the pack?
How do I connect it to my circuit?
What is the operating temperature range?
Overview
The TSOP38238 is a miniaturized infrared receiver designed for remote control and light-sensing applications. It contains a PIN photodiode, a preamplifier, and an internal filter tuned to 38 kHz, all assembled on a lead frame and encapsulated in an epoxy package that acts as an IR filter. The result is a robust component that delivers a demodulated output signal ready for direct decoding by a microprocessor. This pack includes two receivers, giving you a spare for experimentation or the ability to build dual-receiver projects.
Key Features
- 38 kHz demodulation – compatible with the majority of consumer IR remote control formats.
- Wide supply voltage range – operates from 2.5 V to 5.5 V, making it suitable for 3.3 V and 5 V logic systems.
- Low power consumption – typical supply current of 350 µA and maximum operating current of 5 mA.
- 45-degree viewing angle – provides a good balance between directional sensitivity and ease of alignment.
- Integrated design – photo detector and preamplifier in one package with internal PCM frequency filter.
- Enhanced immunity – improved shielding against EMI and ambient light interference.
Specifications Explained
Frequency (38 kHz): This is the carrier frequency that the receiver expects. Most IR remotes modulate their signal at 38 kHz, so the TSOP38238 will work with a wide range of remote controls. If your remote uses a different carrier (such as 36 kHz or 40 kHz), reception may be unreliable.
Supply Voltage (2.5–5.5 V): The receiver can be powered from a variety of sources, including 3.3 V and 5 V microcontroller boards. Ensure your power supply stays within this range to avoid damage.
Supply Current (350 µA): The low typical current draw makes this receiver suitable for battery-operated devices where power efficiency matters.
Viewing Angle (45°): The half-angle of sensitivity is 45 degrees, meaning the receiver detects signals best when the remote is pointed within this cone. For wider coverage, you can use multiple receivers.
Operating Temperature (-25 to +85 °C): The receiver is rated for use in typical indoor and protected outdoor environments across a broad temperature range.
Compatibility and Requirements
The TSOP38238 is compatible with all common IR remote control data formats. It requires a power supply between 2.5 V and 5.5 V and a microcontroller or decoding circuit to interpret the output signal. No additional external components are needed for basic operation, though a decoupling capacitor across the supply pins is recommended in noisy environments. The output is an open-collector type, typically requiring a pull-up resistor (many microcontrollers have internal pull-ups).
Typical Uses
- Decoding signals from TV, DVD, and audio remotes
- Adding IR remote control to Arduino, Raspberry Pi, or other microcontroller projects
- Optical switch and light detection applications
- Home appliance control (air conditioners, fans, etc.)
- Set-top boxes and multimedia equipment
- Educational projects and prototyping
What's in the Box
Two TSOP38238 IR receiver diodes.
Quick specs
- Item Type
- Sensor
- Model No. / Name
- TSOP38238
- Supply Voltage
- 2.5 ~ 5.5
- Frequency (kHz)
- 38 kHz
- Beam Angle
- 45 deg
- Viewing Angle (Deg.)
- 45 deg
















