Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This FT232RL-based USB to TTL adapter gives your computer a virtual serial port for programming and debugging 3.3V or 5V devices. A jumper selects the output voltage and IO level, so one board covers both logic families.

Key Highlights

  • FT232RL USB-to-serial bridge controller for reliable virtual COM port
  • Mini USB connector for easy connection to laptops and desktops
  • Selectable 3.3V or 5V output power and IO level via jumper
  • Two data transmission indicators for real-time activity monitoring
  • Compact 25 x 16 mm board weighs only 4 grams
  • Works with Windows, macOS, and Linux operating systems

Ideal For

  • Electronics hobbyists programming Arduino Pro Mini boards
  • Makers who need a reliable USB-to-TTL bridge for 3.3V or 5V projects
  • Technicians debugging serial communication on GPS or GSM modules
  • Students learning UART communication and microcontroller programming
  • Developers updating firmware on routers or embedded devices

Buying Tip

Remember to order a Mini USB cable separately, as it is not included with the adapter.

Elecvora expert review

Our verdict

A dependable, no-frills USB-to-TTL adapter that covers both 3.3V and 5V logic in one tiny board. It is an essential tool for anyone working with serial-enabled microcontrollers.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Genuine FT232RL chip for stable driver support
  • Selectable 3.3V/5V output and IO level
  • Very compact and lightweight
  • Clear TX/RX activity LEDs

Cons

  • Mini USB cable not included
  • Requires driver installation
  • No mounting holes for permanent installation

Best for

Hobbyists and professionals who need a reliable USB-to-serial bridge for 3.3V or 5V devices.

Not ideal for

Those looking for a ready-to-use cable with a USB-A connector; this board requires a Mini USB cable.

Specifications

IC ChipFT232RL
Connector TypeMini USB
Length (mm)25
Width (mm)16
Weight (g)4
Shipping Weight0.005 kg
Shipping Dimensions4 × 3 × 2 cm

What's in the box

  • 1x FT232RL USB to TTL serial adapter board

Frequently Asked Questions

What driver do I need for this adapter?
You need the FTDI virtual COM port (VCP) driver, available from the FTDI website. It supports Windows, macOS, and Linux.
Can I use this adapter with both 3.3V and 5V devices?
Yes, a jumper on the back lets you select 3.3V or 5V for both the output power and the IO logic level, so it works with either type of device.
Does it come with a USB cable?
No, the package includes only the adapter board. You will need a Mini USB cable to connect it to your computer.
What pins are available on the adapter?
The board provides TXD, RXD, GND, and power output pins for 3.3V and 5V. It also has a DTR pin for automatic reset of compatible boards.
Can I use this to program an Arduino Pro Mini?
Yes, it is commonly used for that purpose. Connect TX, RX, GND, and DTR to the corresponding pins on the Pro Mini, and select the correct board and port in the Arduino IDE.
Is the adapter compatible with Linux?
Yes, the FT232RL is supported by the Linux kernel, and the adapter will appear as a serial port such as /dev/ttyUSB0.

Overview

The FT232RL USB to TTL serial adapter is a small interface board that turns a standard USB port into a UART serial connection. It is built around the FT232RL chip, a well-known USB-to-serial bridge controller that creates a virtual COM port on your computer. This makes it possible to communicate with microcontrollers, GPS receivers, and other devices that use TTL-level serial signals. The board measures just 25 x 16 mm and weighs 4 grams, so it fits easily into compact projects or a tool bag.

Key Features

  • FT232RL chip: Provides stable USB-to-serial conversion with automatic detection of data transfer speeds up to 1 Mbps.
  • Mini USB connector: A common, durable connector for linking the adapter to a host computer.
  • Dual power and logic levels: A jumper on the back selects either 3.3V or 5V for the output power and the IO signal level, covering a wide range of devices.
  • Real-time indicators: Two LEDs show data transmission activity, helping you confirm that communication is taking place.
  • Driver support: Works with Windows, macOS, and Linux after installing the appropriate FTDI driver, which adds a virtual serial port to the system.

Specifications Explained

The FT232RL is the core of the board and handles the translation between USB and UART protocols. The Mini USB port is used for both data and power from the host. The selectable 3.3V/5V output means you can power small external circuits directly from the adapter, and the IO level matches the target device to avoid logic-level mismatches. The compact dimensions and light weight make the adapter easy to carry and install in tight spaces.

Compatibility and Requirements

This adapter is compatible with Windows, macOS, and Linux operating systems. It requires a free USB port on your computer and a Mini USB cable (not included). You will also need to install the FTDI virtual COM port driver, which is available from the chip manufacturer. The board provides TXD, RXD, and GND pins, plus 3.3V and 5V power outputs. It is suitable for devices that use TTL-level UART communication at 3.3V or 5V logic.

Typical Uses

  • Programming Arduino Pro Mini boards with automatic reset via the DTR pin.
  • Programming microcontrollers that use serial bootloaders at 3.3V or 5V logic levels.
  • Connecting GPS modules to a computer for data exchange.
  • Serial debugging and UART communication with various electronics.
  • Firmware upgrades for routers, modems, and other devices with serial interfaces.
  • Data exchange between a microcontroller and a desktop or laptop.

What's in the Box

The package includes one FT232RL USB to TTL serial adapter board. A Mini USB cable and jumper caps are not included unless otherwise stated.

Quick specs

IC Chip
FT232RL
Connector Type
Mini USB
Length (mm)
25
Width (mm)
16
Weight (g)
4
Shipping Weight
0.005 kg
See all specifications