Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Board; operating temperature (°c) -40 to 85; length (mm) 52. Check that your power source supplies 3 to 30 before connecting it.

Key Highlights

  • Model No. / Name: Board
  • Operating Temperature (°C): -40 to 85
  • Length (mm): 52

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameBoard
Operating Voltage (V)3 to 30
Operating Temperature (°C)-40 to 85
Baud Rate (bps)110 to 256000bps
Length (mm)52
Width (mm)24
Weight (g)10
Shipping Weight0.015 kg
Shipping Dimensions8 × 6 × 2 cm

Overview

The TTL to RS485 Power Supply Converter Board 3.3V 5V Hardware Auto Control Module is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Board
  • Operating Voltage (V): 3 to 30 (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): -40 to 85
  • Baud Rate (bps): 110 to 256000bps
  • Length (mm): 52 (measure your mounting space before ordering)
  • Width (mm): 24 (measure your mounting space before ordering)
  • Weight (g): 10 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.015 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

TTL to RS485 module, RS485 to TTL signal, single-chip serial port, UART, lightning protection hardware, automatic flow direction control The power supply of this product is wide voltage (3.0V ~ 30V), which realizes the compatibility between 3.3V system and 5.0V system, and both 3.3V and 5.0V signals can be matched. This product is equipped with wiring terminals and silicone wire, used for direct wiring. All imported chips are used. It has powerful performance, lightning protection design, strong anti-interference ability, industrial grade, and 1-year warranty! It realizes the automatic flow direction control of the RS485 signal and the automatic switching of the sending and receiving directions. Using this module is as simple as operating the serial port.

Connection Diagram:


Features:

  1. This module fully considers the 485 bus lightning protection design and anti-interference design.
  2. It has extremely high EMC (electromagnetic compatibility) and EMI (electromagnetic anti-interference) performance.
  3. When long-distance transmission in the field, the module is connected to the earth Access to the earth can play a good role in anti-interference and lightning protection, making the 485 bus more secure; the indoor short-distance transmission can not be connected to the earth.
  4. With standard 2.54 pitch pin headers for your secondary development
  5. With 120 ohm matching resistance, short-circuit R0 to enable matching resistance, short-circuit is recommended for long-distance transmission.
  6. Support multi-machine communication, at least 40 nodes can be connected to the same network
  7. It can be hot-swapped and there will be no signal thrombosis
  8. Anti-interference wiring and copper laying method to prevent signal interference

Package Includes:

1 x TTL to RS485 Power Supply Converter Board 3.3V 5V Hardware Auto Control Module

1 x Connection Cable

Quick specs

Model No. / Name
Board
Operating Voltage (V)
3 to 30
Operating Temperature (°C)
-40 to 85
Baud Rate (bps)
110 to 256000bps
Length (mm)
52
Width (mm)
24
See all specifications