Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 280 mm closed-loop GT2 timing belt, 6 mm wide with 140 teeth, made from neoprene rubber with a fibreglass core. Its fixed loop shape makes it a direct spare for GT2 pulley driven 3D printer motion systems.

Key Highlights

  • Closed-loop GT2 belt with 280 mm total length and 140 teeth
  • 6 mm width suits standard GT2 pulley grooves
  • Neoprene rubber body with fibreglass core for length stability
  • Circular-arc tooth profile for smooth, consistent pulley engagement
  • 1.52 mm belt height and 0.76 mm tooth height match the GT2 profile
  • Lightweight spare part for printer maintenance and rebuilds

Ideal For

  • 3D printer owners servicing GT2 pulley motion systems
  • Makers replacing a stretched or worn closed-loop belt
  • Builders of compact linear drives needing a fixed 280 mm loop
  • Hobbyists keeping spare belts for printer maintenance

Buying Tip

Measure the pulley centre distance on your machine and confirm a 280 mm closed loop with 140 teeth is the correct length before ordering, as a sealed belt cannot be adjusted.

Elecvora expert review

Our verdict

A sensible, low-cost spare for printers that use GT2 pulleys and a 280 mm loop. The neoprene and fibreglass construction is appropriate for the job, though the fixed length means you must measure carefully first.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Correct GT2 tooth profile for matching pulleys
  • Fibreglass core helps resist stretching
  • Closed loop is quick to fit, with no joining needed
  • Light and easy to store as a spare

Cons

  • Fixed 280 mm length cannot be adjusted
  • Package contents are not specified
  • Unbranded, so no additional documentation is supplied

Best for

Maintenance of 3D printer motion systems using GT2 pulleys and a 280 mm loop

Not ideal for

Drives that need an open-ended belt or a different loop length

Specifications

Item TypeTiming Belt
CompatibilityGT2 Pulley
MaterialNeoprene Rubber With Fiber Glass Core
ColorBlack
ShapeClosed Loop
Width (mm)6
Total Length280 mm
Teeth Quantity140
Belt Height (mm)1.52
Tooth Height (mm)0.76
Shipping Weight0.008 kg
Shipping Dimensions5 × 5 × 2 cm

Frequently Asked Questions

What is this belt made of?
It is neoprene rubber with a fibreglass core, supplied in black as a closed loop.
How many teeth does it have?
The belt has 140 teeth across its 280 mm total length.
Which pulleys does it fit?
It is designed for GT2 pulleys. Check that your pulleys are GT2 type and that the loop length matches your layout.
Can I shorten the belt if it is too long?
No. It is a closed loop, so the 280 mm length is fixed and cannot be cut down or extended.
What is included with the belt?
Package contents are not specified for this item.
How should I store a spare belt?
Keep it clean and dry, away from sharp edges and direct sunlight, and avoid compressing it under heavy objects.

Overview

The Two Trees GT2 Timing Belt is a closed-loop belt intended for 3D printer motion systems that use GT2 pulleys. It measures 280 mm in total length, is 6 mm wide and carries 140 teeth. The body is neoprene rubber with a fibreglass core, a combination chosen to hold shape and length while the belt runs under tension.

Because the belt is supplied as a sealed loop, it is suited to drives where the belt travels around two pulleys rather than being clamped at both ends. The circular-arc tooth shape and small tooth space give smooth engagement with matching pulleys, which helps keep movement consistent along the travel path.

Key Features

  • Closed-loop construction: a fixed 280 mm loop with 140 teeth, ready to fit without joining or clamping.
  • GT2 tooth profile: circular-arc teeth designed to seat in GT2 pulley grooves.
  • Neoprene rubber with fibreglass core: a flexible belt body reinforced for dimensional stability.
  • 6 mm width: matches the groove width of standard GT2 pulleys.
  • Defined tooth geometry: 1.52 mm belt height and 0.76 mm tooth height.
  • Light and compact: shipping weight of 0.008 kg and shipping dimensions of 5 x 5 x 2 cm.

Specifications Explained

Total length and tooth count. At 280 mm with 140 teeth, the belt has a fixed circumference. Check that this loop length matches the pulley spacing on your machine before ordering, since a closed loop cannot be shortened or extended.

Width and height. The 6 mm width is the common GT2 size, and the 1.52 mm belt height with 0.76 mm tooth height describes the profile that sits in the pulley groove. These figures matter when confirming the belt will run true without rubbing on flanges or guides.

Material. Neoprene rubber provides flexibility around small pulleys, while the fibreglass core adds resistance to stretching over time.

Compatibility and Requirements

This belt is intended for GT2 pulleys. Fit depends on two things: the pulley type and the loop length required by your drive layout. Confirm that your setup uses GT2 pulleys and that a 280 mm closed loop with 6 mm width suits the distance between your pulleys. No other compatibility details are specified.

Typical Uses

Suitable for 3D printer motion assemblies using GT2 pulleys, for replacing a worn or stretched belt during maintenance, and for compact linear drive projects where a fixed 280 mm loop fits the layout.

What's in the Box

Package contents are not specified for this item.

Quick specs

Item Type
Timing Belt
Compatibility
GT2 Pulley
Material
Neoprene Rubber With Fiber Glass Core
Color
Black
Shape
Closed Loop
Width (mm)
6
See all specifications