
1 / 4 · Click to enlarge
AI Summary
A compact USB in-circuit programmer for ATMEL AVR microcontrollers, covering ATMega, Tiny, Classic, CAN and PWM series. It uses a firmware-only USB driver, so no special USB controller is needed.
Key Highlights
- Works with ATMega, Tiny, Classic, CAN and PWM series
- Firmware-only USB driver eliminates need for extra controller
- Ultra-light at 15 g and only 20.5 mm wide
- Bus-powered via USB for convenient use
- Includes FRC cable for immediate connection
- Compact dimensions: 8 × 5 × 2 cm shipping size
Ideal For
- Electronics hobbyists programming AVR microcontrollers
- Students learning embedded systems and firmware flashing
- Makers building projects with ATMega or Tiny series chips
- Technicians repairing devices with AVR microcontrollers
- Engineers developing CAN or PWM control systems
Buying Tip
Check that your target microcontroller is listed in the supported series (ATMega, Tiny, Classic, CAN, PWM) and that you have the necessary ICSP header on your board before purchasing.
Elecvora expert review
Our verdict
A no-frills, dependable programmer that covers a wide range of AVR chips at a very low cost. It is perfect for occasional flashing and learning, though it lacks advanced features like onboard protection or status LEDs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very low cost for a wide range of AVR support
- Compact and lightweight design
- Bus-powered, no external power needed
- Includes FRC cable for immediate use
Cons
- No onboard status indicators
- Requires separate programming software
- Limited documentation included
Best for
Hobbyists and students needing an affordable AVR programmer
Not ideal for
Professionals requiring high-speed production programming
Specifications
| Width (mm) | 20.5 |
|---|---|
| Weight (g) | 15 |
| Shipping Weight | 0.018 kg |
| Shipping Dimensions | 8 × 5 × 2 cm |
What's in the box
- 1 x USB ASP AVR Programming Device
- 1 x FRC cable
Frequently Asked Questions
Which microcontrollers does this programmer support?
Do I need to install drivers?
Is an external power supply required?
What is included in the package?
Can I use this with Arduino boards?
How should I store and maintain the device?
Overview
The USB ASP AVR Programming Device is a compact, USB-powered in-circuit programmer for ATMEL AVR microcontrollers. It provides a direct connection between your computer and the target chip, allowing you to upload firmware without removing the microcontroller from the circuit. The design is based on an ATMega8 or ATMega88 microcontroller and a handful of passive components, and it relies on a firmware-only USB driver, so no dedicated USB controller chip is required. This makes the programmer simple, affordable, and easy to integrate into your workflow.
Key Features
- Broad compatibility: Supports ATMega, Tiny, Classic, CAN and PWM series AVR microcontrollers.
- Firmware-only USB driver: No special USB controller needed, reducing complexity.
- Compact and lightweight: Measures just 20.5 mm in width and weighs 15 g, making it highly portable.
- Bus-powered: Draws power directly from the USB port, so no external power supply is required.
- Ready to use: Comes with an FRC cable for quick connection to your target board.
Specifications Explained
The programmer’s small footprint (20.5 mm width) and low weight (15 g) mean it won’t clutter your workspace and is easy to carry between locations. The shipping dimensions of 8 × 5 × 2 cm and shipping weight of 0.018 kg indicate a compact package that fits through most letterboxes. The firmware-only USB driver simplifies setup because the device does not rely on an FTDI or similar USB-to-serial chip; instead, the on-board AVR handles USB communication directly. This approach is common in hobbyist programmers and keeps costs down while maintaining functionality.
Compatibility and Requirements
The device is compatible with ATMEL AVR microcontrollers from the ATMega, Tiny, Classic, CAN and PWM series. It requires a host computer with a USB port and appropriate programming software (not included). The programmer is bus-powered, so no external power source is needed. Ensure that the target chip is supported by the software you use and that the FRC cable is connected correctly to the ICSP header.
Typical Uses
This programmer is ideal for electronics hobbyists, students, and professionals who need to flash firmware onto AVR microcontrollers. Common applications include prototyping with Arduino-compatible boards, repairing consumer electronics, developing custom CAN or PWM control systems, and learning embedded programming. Its small size makes it a convenient tool for field repairs or mobile projects.
What's in the Box
- 1 x USB ASP AVR Programming Device
- 1 x FRC cable

Quick specs
- Width (mm)
- 20.5
- Weight (g)
- 15
- Shipping Weight
- 0.018 kg
- Shipping Dimensions
- 8 × 5 × 2 cm













