
1 / 6 · Click to enlarge
AI Summary
A self-powered USB to RS485/TTL adapter built on the FT232RL and 75176 chips, supporting 300–9216000 bps and up to 32 devices per bus. Jumper selection lets you switch between RS485 and TTL-level serial operation.
Key Highlights
- FT232RL + 75176 chipset for reliable USB-to-serial conversion
- Baud rates from 300 to 9216000 bps with automatic data-rate detection
- Supports multipoint RS485 buses with up to 32 connected devices
- TVS tube interface protection and USB self-recovery protection
- Four jumpers switch between RS485 and TTL-level serial modes
- Self-powered from the USB port; no external supply required
Ideal For
- Embedded developers connecting RS485 sensors to a PC
- Industrial automation technicians working with multi-drop serial buses
- IT and security installers integrating surveillance or attendance equipment
- Makers and hobbyists needing a TTL-level serial bridge
- Field service engineers troubleshooting CNC or PBX serial links
Buying Tip
Confirm that your target device uses RS485 or TTL-level serial signalling and that you can install the FT232 driver on your operating system before purchasing.
Elecvora expert review
Our verdict
A practical, low-cost adapter that covers both RS485 and TTL serial needs with automatic direction control and a wide baud rate range. The FT232RL and 75176 combination and built-in protection make it a sensible choice for bench and field work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Automatic data-flow direction control simplifies RS485 wiring
- Wide baud rate range up to 9216000 bps
- Jumper selection adds TTL-level serial capability
- Self-powered from USB with protection features
Cons
- Driver installation is required before first use
- Jumper mode must be changed manually when switching between RS485 and TTL
- No enclosure or cable is included
Best for
Technicians and developers needing a flexible USB-to-RS485/TTL bridge
Not ideal for
Users who need a ready-to-use isolated industrial converter with enclosure
Specifications
| Model No. / Name | Converter |
|---|---|
| Baud Rate (bps) | 300 to 9216000 |
| Operating Temperature (°C) | -40 to 90 |
| Length (mm) | 78 |
| Width (mm) | 20 |
| Weight (g) | 15 |
| Shipping Weight | 0.018 kg |
| Shipping Dimensions | 9 × 3 × 3 cm |
What's in the box
- 1 x USB to RS485 TTL Serial Converter Adapter FT232
Frequently Asked Questions
What is the difference between RS485 and TTL mode on this adapter?
How many devices can I connect to one RS485 bus?
Does the adapter need an external power supply?
Which operating systems are supported?
What is included in the package?
What protection features does the board have?
Overview
The USB to RS485 TTL Serial Converter Adapter FT232 is a compact interface module that bridges a computer's USB port and RS485 or TTL-level serial equipment. It uses the FT232RL USB-to-serial chip together with a 75176 transceiver, and it presents itself to the host as a virtual serial COM port. Because the board is self-powered from USB, no separate power supply is needed. Four jumpers connect the USB interface to the RS485 side; when they are removed, the USB interface can be used as a TTL-level serial port instead.
Key Features
- USB 2.0 standard interface, backward compatible with older USB ports
- Baud rate range of 300 to 9216000 bps with automatic serial signal data-rate detection
- Automatic data-flow direction control distinguishes and manages transfer direction without manual switching
- Multipoint support: each converter allows up to 32 RS485 interface devices on the bus
- TVS tube interface protection and USB self-recovery protection
- Compact board measuring 78 mm × 20 mm and weighing about 15 g
Specifications Explained
The wide baud rate range covers slow legacy serial links as well as faster industrial equipment, and automatic detection means the adapter follows the data rate of the connected device. Automatic direction control removes the need for a hand-switched transmit/receive line, which simplifies wiring in RS485 networks. The 32-device bus capacity suits multi-drop installations such as sensor networks or controller chains. TVS tube protection helps absorb transient voltage spikes on the interface, while USB self-recovery protection supports recovery after a fault condition. The operating temperature range of -40 to 90 °C allows use in demanding environments.
Compatibility and Requirements
The adapter is supported on Windows 98/ME/2000/XP/WIN7/Vista, Linux and Mac operating systems. A free USB port on the host computer is required, and the appropriate FT232 driver must be installed for the virtual COM port to appear. The RS485 side connects to standard RS485 devices; the TTL side connects to logic-level serial ports when the jumpers are removed.
Typical Uses
- Surveillance cameras and video capture devices
- Fingerprint attendance machines
- PBX systems
- CNC machines
- General RS485 or TTL serial communication with a PC
What's in the Box
1 × USB to RS485 TTL Serial Converter Adapter FT232.
Quick specs
- Model No. / Name
- Converter
- Baud Rate (bps)
- 300 to 9216000
- Operating Temperature (°C)
- -40 to 90
- Length (mm)
- 78
- Width (mm)
- 20
- Weight (g)
- 15














