Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Module; chipset CP2102; power rating USB, 3.3V (<40mA), 5V, GND, TX, RX.

Key Highlights

  • Model No. / Name: Module
  • Chipset: CP2102
  • Power Rating: USB, 3.3V (<40mA), 5V, GND, TX, RX

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameModule
ChipsetCP2102
Power RatingUSB, 3.3V (<40mA), 5V, GND, TX, RX
Baud Rate (bps)300bps to 1Mbps
OS SupportsWindows, Mac OS, Linux
Length (mm)48
Width (mm)12
Shipping Weight0.003 kg
Shipping Dimensions5 × 4 × 1 cm

Overview

The USB To UART TTL Serial CP2102 Module STC Download Cable Pl2303 for Arduino is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Module
  • Chipset: CP2102 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Power Rating: USB, 3.3V (<40mA), 5V, GND, TX, RX
  • Baud Rate (bps): 300bps to 1Mbps
  • OS Supports: Windows, Mac OS, Linux (confirm your cable or board uses the same connector)
  • Length (mm): 48 (measure your mounting space before ordering)
  • Width (mm): 12 (measure your mounting space before ordering)
  • Shipping Weight: 0.003 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The USB to UART TTL Serial CP2102 Module with STC download cable and PL2303 compatibility is an essential tool for Arduino enthusiasts. Facilitating easy communication between a computer and Arduino via USB, it features the CP2102 chipset for reliable data transfer. Ideal for programming and debugging, it enhances the Arduino development experience with efficient connectivity and STC download capabilities.

Features :

  1. The main chip is CP2102. After installing the driver, a virtual serial port is generated.
  2. USB power supply. The lead-out interface includes 3.3V (<40mA), 5V, GND, TX, and RX. The signal pin level is 3.3V, positive logic.
  3. Onboard status indicator light and transceiver indicator light. After the driver is installed correctly, the status indicator light will be always on. The transceiver indicator light will flash during communication. The higher the baud rate, the lower the brightness.
  4. Supports waves from 300bps to 1Mbps. Bit rate
  5. Communication format support: 1) 5, 6, 7, 8 data bits; 2) Support 1, 1.5, 2 stop bits; 3) odd, even, mark, space, none check
  6. Support operating system: Windows Vista/XP/server 2003/200, Mac OS-X/OS-9, Linux
  7. The USB head is male and can be directly connected to the computer USB port
  8. The chip components are produced by the SMT process, and the quality is stable
  9. No Volume including USB head: (mm)

Package Includes:

1 x USB To UART TTL Serial CP2102 Module STC Download Cable Pl2303 for Arduino.

Quick specs

Model No. / Name
Module
Chipset
CP2102
Power Rating
USB, 3.3V (&lt;40mA), 5V, GND, TX, RX
Baud Rate (bps)
300bps to 1Mbps
OS Supports
Windows, Mac OS, Linux
Length (mm)
48
See all specifications