Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A tiny 28 x 18mm USB 2.0 board that expands one USB input into four outputs. It is driver-free and plug-and-play, with 2.54mm and 2.0mm pin holes for DIY and development board builds.

Key Highlights

  • One USB input expanded to four USB 2.0 output ports
  • Accepts 2.54mm and 2.0mm single-row pins at the input
  • Driver-free plug-and-play on supported systems
  • Compact 28 x 18mm bare PCBA board for tight builds
  • Reserved 5Vin pad for power input
  • Three 2mm positioning holes for secure alignment

Ideal For

  • Raspberry Pi and ARM/MIPS development board users adding USB ports
  • Makers building compact enclosures who need an internal hub
  • DIY enthusiasts comfortable soldering pin headers and pads
  • Technicians expanding USB on notebooks, tablets or all-in-one PCs
  • IP camera and network TV installers needing extra USB interfaces

Buying Tip

Check whether your host board uses 2.54mm or 2.0mm pin pitch before ordering, and plan how you will supply 5V to the 5Vin pad since no cables or headers are included.

Elecvora expert review

Our verdict

A practical, low-cost way to add four USB 2.0 ports inside a small build, provided you are comfortable with bare-board wiring. It is not a finished consumer hub, but for development boards and DIY projects the small footprint and dual pin pitch make it genuinely useful.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very small 28 x 18mm footprint
  • Accepts both 2.54mm and 2.0mm input pins
  • Driver-free plug-and-play on supported systems
  • Reserved pads on every output channel for flexible wiring

Cons

  • Bare PCBA only, no headers or cables included
  • Output ports use 2.0mm pins, which may need adapters
  • Requires you to supply 5V power yourself

Best for

Makers and developers adding USB ports inside compact builds

Not ideal for

Buyers wanting a finished plug-and-play desktop hub with a case and cables

Specifications

Model No. / NameExpansion Module
CompatibilityHoles 2.54mm and 2.0mm single-row pins
USB PortFour USB 2.0mm
Length (mm)28
Width (mm)18
Shipping Weight0.003 kg
Shipping Dimensions4 × 4 × 1 cm

What's in the box

  • 1 x USB2.0 Expansion Module HUB 1 Drag 4 Interface Adapter Development Board Free Drive

Frequently Asked Questions

How many USB devices can I connect?
The board expands one USB input into four USB 2.0 output ports, so up to four devices can be connected through it.
Do I need to install drivers?
No. The module is driver-free and plug-and-play on systems that already support USB, including the Linux kernel, Ubuntu and Android platforms listed by the manufacturer.
How is the board powered?
Power is supplied through the reserved pad labeled 5Vin at the upper-left corner of the board. You will need to provide the 5V connection yourself.
What pin sizes does the input accept?
The input holes accept both 2.54mm and 2.0mm single-row pins, so it can match either common pitch on your host board.
What is included with the module?
The package contains one USB 2.0 Expansion Module HUB 1-to-4 board. Headers, cables and a power supply are not included.
How do I secure the board in place?
The board has three 2mm diameter positioning holes that can be used to align and fasten it inside your enclosure or project.

Overview

This USB 2.0 Expansion Module is a small bare PCBA board that takes one USB input and distributes it to four USB 2.0 outputs. It is aimed at builders who need extra USB ports inside a project rather than on a desk, and who are comfortable working with pin headers and solder pads. The board measures 28mm by 18mm, so it can sit inside compact enclosures, development rigs and DIY assemblies where a standard hub would be too large.

Key Features

  • One-to-four expansion: a single input channel feeds four USB 2.0 output ports.
  • Dual input hole sizes: accepts both 2.54mm and 2.0mm single-row pins, matching common host boards.
  • Driver-free design: plug-and-play operation on platforms with existing USB driver support.
  • Reserved 5Vin pad at the upper-left corner for the power input connection.
  • Output pads: each of the four 2.0mm output pins has reserved pads for wiring.
  • Three 2mm positioning holes help align and secure the board during installation.

Specifications Explained

The 28 x 18mm footprint is the headline number here. It keeps the module small enough for stacked or enclosed builds. The input side is deliberately flexible: 2.54mm and 2.0mm single-row pin holes mean the board can be mated with either pitch, which is useful when your main board uses one standard and your wiring uses another. The four output ports are 2.0mm single-row pins, each with reserved solder pads, so you can either plug in a matching header or solder wires directly. The 5Vin pad marks where power enters the board, and the three 2mm positioning holes give you a way to fix the module in place rather than leaving it loose.

Compatibility and Requirements

The module is driver-free on systems that already support USB, and the manufacturer lists Linux kernel, Ubuntu and Android among the supported platforms. It is intended for host boards with 2.54mm or 2.0mm single-row pin holes, and it is commonly paired with Raspberry Pi, ARM and MIPS development boards, notebooks, tablets, all-in-one computers and network TV USB expansion. Note that this is a bare board: headers, wiring and the host connection are not included, so you will need to supply your own pins or solder joints.

Typical Uses

  • Adding USB ports to a Raspberry Pi or ARM/MIPS development board.
  • Expanding the USB interface on a notebook, tablet or all-in-one computer.
  • Adding ports to IP camera setups and advertising or network TV machines.
  • DIY projects that need a small internal hub on a bare PCBA.

What's in the Box

One USB 2.0 Expansion Module HUB 1-to-4 Interface Adapter Development Board. No cables, headers or power supply are included.

Quick specs

Model No. / Name
Expansion Module
Compatibility
Holes 2.54mm and 2.0mm single-row pins
USB Port
Four USB 2.0mm
Length (mm)
28
Width (mm)
18
Shipping Weight
0.003 kg
See all specifications