Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This HAT adds two isolated CAN Bus channels to a Raspberry Pi using MCP2515 and SI65HVD230 chips. It provides stable, protected CAN communication over SPI for automotive and industrial projects.

Key Highlights

  • Dual CAN channels via MCP2515 and SI65HVD230 chips
  • Power and signal isolation for stable, noise-resistant communication
  • Stackable design allows multiple HATs for more CAN ports
  • Jumper-selectable 3.3V or 5V operating voltage
  • Onboard 120Ω terminal resistors with jumper configuration
  • TVS diodes for ESD and transient voltage protection

Ideal For

  • Automotive electronics hobbyists building CAN bus diagnostic tools
  • Industrial automation engineers prototyping CAN nodes
  • Robotics developers needing reliable CAN communication
  • Raspberry Pi enthusiasts expanding connectivity options
  • Students learning about CAN bus and isolated interfaces

Buying Tip

Check if your Raspberry Pi model has a 40-pin header and ensure you have a spare GPIO header for stacking; the included female header allows you to add another HAT on top.

Elecvora expert review

Our verdict

The Waveshare 2-Channel Isolated CAN Bus HAT is a well-designed expansion board that brings robust, isolated CAN connectivity to the Raspberry Pi. Its dual-chip architecture and protection features make it suitable for demanding automotive and industrial applications.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual isolated CAN channels in a single HAT
  • Stackable design for scalability
  • Comprehensive protection circuitry
  • Jumper-configurable voltage and termination
  • Includes mounting hardware and header

Cons

  • Requires soldering of the female header if not pre-soldered
  • No onboard power supply; relies on Raspberry Pi
  • Limited to CAN 2.0, not CAN FD

Best for

Engineers and makers needing reliable dual CAN interfaces on Raspberry Pi

Not ideal for

Projects requiring CAN FD or wireless CAN connectivity

Specifications

Item TypeHAT
CompatibilityPi Series
HAT TypeExpansion HAT
CommunicationSPI
Operating Voltage (V)5
Mounting Hole Diameter (mm)3
Bluetooth VersionSupports Bluetooth 5.1 dual mode function
Shipping Weight0.05 kg
Shipping Dimensions8 × 7 × 3 cm

What's in the box

  • 1 x 2-CH CAN HAT
  • 1 x RPi screws pack
  • 1 x 2×20PIN female header

Frequently Asked Questions

Which Raspberry Pi models are compatible with this HAT?
It works with any Raspberry Pi board that has a standard 40-pin GPIO header, including most models from the Raspberry Pi 1 B+ onward.
Do I need to provide external power to the HAT?
No, the HAT is powered directly from the Raspberry Pi’s 5V supply. The isolated terminal also receives power from the Pi through the isolation circuit.
How do I set the operating voltage?
Use the onboard jumper to select either 3.3V or 5V logic level. Set it to match the voltage of your host board or peripherals.
Can I use multiple HATs to get more than two CAN channels?
Yes, the stackable design allows you to stack multiple HATs, but you will need to manage SPI chip select lines and ensure proper configuration.
What is included in the package?
The package includes the 2-CH CAN HAT, a set of Raspberry Pi screws, and a 2×20PIN female header.
Is the 120Ω termination resistor enabled by default?
The termination resistors are configured via jumpers. By default, they may be disabled; check the board markings and enable them if the HAT is at the end of the bus.

Overview

The Waveshare 2-Channel Isolated CAN Bus Expansion HAT is a stackable add-on board for Raspberry Pi that provides two independent CAN Bus interfaces. It uses a combination of the MCP2515 CAN controller and the SI65HVD230 CAN transceiver to deliver reliable CAN 2.0 communication. The HAT connects to the Raspberry Pi’s 40-pin GPIO header and communicates over SPI, making it compatible with a wide range of Raspberry Pi models. Whether you are building an automotive diagnostic tool, an industrial automation node, or a robotics project that needs robust CAN connectivity, this HAT offers a clean, integrated solution.

Key Features

  • Dual-channel CAN communication: Two separate CAN channels based on the MCP2515 and SI65HVD230 chipset.
  • Isolation for stability: Integrated power isolation and a digital isolator keep signals clean and protect your Raspberry Pi from electrical noise and voltage spikes.
  • Protection circuits: Onboard TVS diodes guard against ESD and transient voltage events.
  • Flexible voltage: A jumper lets you set the operating voltage to 3.3V or 5V to match your logic level.
  • Termination resistors: Onboard 120Ω resistors can be enabled or disabled via jumpers, simplifying bus termination.
  • Stackable design: The HAT can be stacked with other HATs or multiple units to expand the number of CAN channels.
  • SPI breakout: SPI control pins are broken out for connecting to other host boards such as STM32 or Arduino.

Specifications Explained

Compatibility: This HAT is designed for Raspberry Pi series boards with a standard 40-pin GPIO header. It communicates over SPI, so your Raspberry Pi must have SPI enabled in the operating system.

Operating voltage: The board operates at 5V, but the logic level can be selected as 3.3V or 5V using a jumper. This ensures compatibility with different host boards and peripherals.

Isolation: Power isolation and signal isolation mean that the CAN bus side is electrically separated from the Raspberry Pi side. This prevents ground loops and protects against voltage differences, which is especially important in automotive and industrial environments.

Termination: CAN buses require 120Ω termination at each end. The onboard resistors can be activated with jumpers, saving you from adding external resistors.

Mounting: The HAT has mounting holes with a diameter of 3mm, and a screw pack is included for secure installation.

Compatibility and Requirements

This HAT works with Raspberry Pi series boards that have a 40-pin GPIO header. It requires SPI communication, which must be enabled in your Raspberry Pi’s configuration. The board is powered from the Raspberry Pi’s 5V supply; no additional power source is needed for the isolated terminal. For programming, online development resources and a manual are available from Waveshare.

Typical Uses

  • Automotive diagnostics and data logging
  • Industrial automation and control systems
  • Robotics and motor control with CAN bus
  • CAN bus gateways and protocol converters
  • Educational projects exploring CAN communication

What's in the Box

  • 1 x 2-CH CAN HAT
  • 1 x RPi screws pack
  • 1 x 2×20PIN female header

Quick specs

Item Type
HAT
Compatibility
Pi Series
HAT Type
Expansion HAT
Communication
SPI
Operating Voltage (V)
5
Mounting Hole Diameter (mm)
3
See all specifications