Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type HAT; compatibility Pi Series; hat type Expansion HAT. Check that your power source supplies 3.3 ~ 5 before connecting it.

Key Highlights

  • Item Type: HAT
  • Compatibility: Pi Series
  • HAT Type: Expansion HAT

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeHAT
CompatibilityPi Series
HAT TypeExpansion HAT
UART Expansion ChipSC16IS752
RS485 transceiverSP3485
CommunicationSPI
Data Transfer Rate300 ~ 921600 bps
Operating Voltage (VDC)3.3 ~ 5
Length (mm)65
Width (mm)56.5
Mounting Hole Diameter (mm)3
Weight (g)29
Shipping Weight0.035 kg
Shipping Dimensions7 × 6 × 3 cm

Overview

The Waveshare 2-Channel Isolated RS485 Expansion HAT for Raspberry Pi, made by WAVESHARE, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: HAT
  • Compatibility: Pi Series
  • HAT Type: Expansion HAT
  • UART Expansion Chip: SC16IS752
  • RS485 transceiver: SP3485
  • Communication: SPI
  • Data Transfer Rate: 300 ~ 921600 bps
  • Operating Voltage (VDC): 3.3 ~ 5 (match this to your power supply; too high a voltage can damage the part)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a Waveshare 2-Channel Isolated RS485 Expansion HAT for Raspberry Pi. This  dual-channel isolated RS485 extension board specially designed for raspberry PI, which adopts SC16IS752+SP3485 solution embeds with protection circuits such as power supply isolation, ADI magnetical isolation, and TVS diode, etc. This product adopts SC16IS752 as a controller. SC16IS752 is a dual-channel high-performance UART expansion chip that supports SPI and I2C interface communication. This module uses an SPI interface.

Useful link:

To do Hardware and Software setup, please follow this tutorial.
What's on Board: Waveshare 2-Channel Isolated RS485 Expansion HAT for Raspberry Pi
  1. SC16IS752 UART expansion chip
  2. ADUM1412 digital isolator
  3. PC817 optocoupler
  4. SP3485 RS485 transceiver
  5. B0505LS power supply isolation module
  6. RT9193-33 power chip
  7. SMAJ12CA transient suppress diode array
  8. Auto-recovery fuse
  9. Status indicator PWR: power indicator RXD/TXD: UART transceiving indicator
  10. Raspberry Pi GPIO connector: for connecting Raspberry Pi
  11. RS485 terminal
  12. MCU control header: for connecting host control boards like Arduino
  13. 120Ω terminal resistor switch
  14. Interrupt pin switch
  15. Operating mode selection Half-auto: A=0, B=1 Full-auto: A=1, B=0
It is easy to control the 2-channel RS485 for auto-transceiving via the SPI interface. Due to its fast communication, stability, reliability, and safety, it is an ideal choice for fields like industrial automation. Note: Raspberry Pi is not included with this product.

Useful link:

To explore more about this module, please follow this link .

Features: 

  1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  2. Adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS485, data rate up to 921600bps
  3. Allows transceiving data manually or automatically, configured by DIP switch
  4. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic
  5. Onboard auto-recovery fuse and protection diodes, ensures the current/voltage stable outputs, provides over-current/over-voltage proof, improves shock resistance
  6. Onboard LEDs for indicating the power and transceiver status
  7. Breakout SPI control pins, for connecting with host control boards like Arduino

Package Includes: 

1 x 2-CH RS485 HAT

1 x 2x20PIN female pin header

1 x RPi screws pack (2pcs)

Quick specs

Item Type
HAT
Compatibility
Pi Series
HAT Type
Expansion HAT
UART Expansion Chip
SC16IS752
RS485 transceiver
SP3485
Communication
SPI
See all specifications