
1 / 7 · Click to enlarge
AI Summary
A DIY carrier board that converts a compatible M.2 Key B 5G module into a USB 3.1 dongle with quad antennas and a SIM slot. Ideal for building a custom 5G modem for PCs or single-board computers.
Key Highlights
- Accepts M.2 Key B 5G modules in 3042/3052 form factor
- Four SMA antenna connectors for 3G/4G/5G/GNSS
- USB 3.1 Type-A port for high-speed host connection
- Onboard Nano SIM slot and status indicators
- Includes aluminum alloy heatsink and protective case
- Supports firmware upgrade via USB port
Ideal For
- Makers building custom 5G modems for single-board computers
- Developers testing SIMCom or Quectel 5G modules
- Network enthusiasts creating portable high-speed internet setups
- IoT integrators needing cellular backhaul for edge devices
- Raspberry Pi and Jetson Nano users adding 5G connectivity
Buying Tip
Confirm that your 5G module is an M.2 Key B 3042/3052 card from SIMCom or Quectel before ordering, as the module is not included.
Elecvora expert review
Our verdict
The Waveshare 5G DONGLE Module is a well-thought-out carrier board that simplifies integrating a 5G module into DIY projects. It offers good thermal design and flexible connectivity, though it requires careful module selection and assembly.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Supports popular 5G modules from SIMCom and Quectel
- Includes quad antennas, case, and thermal management
- Multiple dial-up protocols for broad compatibility
- USB 3.1 for high-speed data transfer
Cons
- 5G module not included, adding significant cost
- Requires assembly and technical knowledge
- Limited to specific module form factors and brands
Best for
Developers and makers who need a customizable 5G modem for embedded projects
Not ideal for
Users seeking a plug-and-play 5G dongle with no assembly or module sourcing
Specifications
| Item Type | Dongle |
|---|---|
| Communication Protocol | TCP / UDP / FTP / HTTP / HTTPS / PING / SMS |
| Dial Up | RNDIS, NDIS, PPP, MBIM |
| Firmware upgrade | Supports firmware upgrade via USB port |
| Antenna Type | For 3G/4G/5G/GNSS, |
| SIM Card | 1.8V/2.95V |
| Form factor | M.2 |
| Power Supply Voltage (V) | 3.135~4.4V |
| Shipping Weight | 0.217 kg |
| Shipping Dimensions | 18 × 14 × 5 cm |
What's in the box
- 1x Waveshare 5G DONGLE Module carrier board (without 5G module)
- 1x Aluminum alloy case (top and bottom)
- 4x Antenna
- 1x IPEX adapter cable
- 1x USB3.0 female to dual USB male extension cable
- 1x SMA protective cap
- 1x Thermal tape
- 1x Screws pack
Frequently Asked Questions
Does this product include a 5G module?
What type of SIM card does it accept?
Can I use this with a Raspberry Pi?
Is assembly required?
How is the device powered?
Can I upgrade the firmware?
Overview
The Waveshare 5G DONGLE Module is a carrier board designed to interface a compatible M.2 Key B 5G module with a host device over USB 3.1. It is not a standalone modem: you must install a supported 5G module (sold separately) to use it. The board provides the physical connection, power regulation, SIM slot, antenna connectors, and status indicators needed to operate the module. With its aluminum alloy heatsink and included case, the kit is suited for DIY builds where a reliable, high-speed cellular link is required.
Key Features
- M.2 Key B interface supports 5G modules with 3042/3052 form factor, including SIMCom SIM82XX and Quectel RM50XQ series.
- USB 3.1 Type-A port connects to PCs, Raspberry Pi, or Jetson Nano host boards for high-speed data transfer.
- Four SMA antenna connectors for 3G/4G/5G/GNSS signals, with included antennas and IPEX adapter cable.
- Onboard Nano SIM card slot (1.8V/2.95V) for network access.
- Power and network indicators plus reserved pads for testing and integration.
- Customized aluminum alloy heatsink and protective case for heat dissipation and durability.
- Firmware upgrade supported through the USB port.
Specifications Explained
Communication protocols: The board supports TCP, UDP, FTP, HTTP, HTTPS, PING, and SMS, covering common data and messaging tasks. Dial-up methods: RNDIS, NDIS, PPP, and MBIM give flexibility across operating systems and host devices. Power supply: The module requires 3.135–4.4V, which is regulated by the carrier board from the USB bus. SIM voltage: The slot supports 1.8V and 2.95V SIM cards. Form factor: The M.2 Key B slot accepts 3042 and 3052 modules, which are common for 5G. Antenna type: The four SMA connectors are intended for 3G/4G/5G/GNSS antennas, and the package includes four antennas.
Compatibility and Requirements
This product requires a separate 5G module with M.2 Key B interface and 3042/3052 form factor. It is compatible with SIMCom SIM82XX and Quectel RM50XQ series modules. The host device must have a USB 3.1 Type-A port (backward compatible with USB 2.0 and 1.1). A Nano SIM card is required for cellular service. Assembly is required; the module is not pre-assembled. The board cannot be used alone without a 5G module.
Typical Uses
- Building a custom 5G modem for a desktop or laptop.
- Adding cellular connectivity to a Raspberry Pi or Jetson Nano project.
- Testing and developing 5G applications with SIMCom or Quectel modules.
- Creating a portable high-speed internet hotspot (with appropriate host software).
- Integrating 5G into IoT gateways or edge devices.
What's in the Box
- 1x Waveshare 5G DONGLE Module carrier board (without 5G module)
- 1x Aluminum alloy case (top and bottom)
- 4x Antenna
- 1x IPEX adapter cable
- 1x USB3.0 female to dual USB male extension cable
- 1x SMA protective cap
- 1x Thermal tape
- 1x Screws pack

Quick specs
- Item Type
- Dongle
- Communication Protocol
- TCP / UDP / FTP / HTTP / HTTPS / PING / SMS
- Dial Up
- RNDIS, NDIS, PPP, MBIM
- Firmware upgrade
- Supports firmware upgrade via USB port
- Antenna Type
- For 3G/4G/5G/GNSS,
- SIM Card
- 1.8V/2.95V



















