Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Waveshare ARPI600 adapter board lets you connect Arduino shields to a Raspberry Pi via the 40-pin GPIO header. It also adds XBee support, ADC, RTC, and USB-to-UART debugging in one compact board.

Key Highlights

  • Adapts Raspberry Pi GPIO to Arduino shield pinouts
  • Onboard TLC1543 10-bit ADC with 11 channels
  • PCF8563 real-time clock with CR1220 battery holder
  • XBee connector for wireless communication modules
  • USB to UART for serial debugging or XBee USB adapter
  • Sensor interface for connecting various sensors

Ideal For

  • Raspberry Pi users wanting to add Arduino shields
  • Makers building wireless projects with XBee modules
  • Students learning embedded systems and prototyping
  • Engineers needing analog input and RTC for Raspberry Pi
  • Developers requiring USB-to-UART serial debugging

Buying Tip

Remember to order a CR1220 battery separately if you need the real-time clock to keep time when powered off.

Elecvora expert review

Our verdict

The Waveshare ARPI600 is a well-designed adapter that cleanly merges Raspberry Pi and Arduino hardware, with useful extras like ADC, RTC, and XBee support. It is a solid choice for prototyping and education, though it requires some jumper configuration and a separate RTC battery.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Enables use of Arduino shields with Raspberry Pi
  • Includes ADC, RTC, and XBee connector
  • USB-to-UART simplifies debugging
  • Compact and well-labeled board

Cons

  • CR1220 battery not included
  • Requires manual jumper configuration
  • Limited documentation for beginners

Best for

Makers and engineers combining Raspberry Pi and Arduino ecosystems

Not ideal for

Users seeking a plug-and-play solution without configuration

Specifications

Board TypeAdapter Board
ICTLC1543, AD Converter
RTC (Real Time Clock)PCF8563
Length (mm)85
Width (mm)63.8
Weight (g)94
Shipping Weight0.1 kg
Shipping Dimensions9 × 7 × 3 cm

What's in the box

  • 1 x ARPI600 adapter board
  • 1 x USB type A plug to mini-B plug cable
  • 1 x Raspberry Pi screws set

Frequently Asked Questions

Which Raspberry Pi models are supported?
The board supports Raspberry Pi series boards with a 40-pin GPIO header, as well as Jetson Nano.
Can I use this board with an Arduino board?
The ARPI600 is designed to connect Arduino shields to a Raspberry Pi. It is not intended to be used as a standalone Arduino board.
Is a battery included for the real-time clock?
No, the CR1220 button battery is not included. You will need to purchase one separately if you want RTC backup.
What is the purpose of the USB-to-UART port?
It allows serial debugging and can be configured as an XBee USB adapter for communication with XBee modules.
How many analog inputs does the ADC provide?
The TLC1543 ADC offers 11 channels: 6 are routed to the Arduino interface and 5 to the sensor interface.
What is included in the package?
The package includes the ARPI600 board, a USB type A to mini-B cable, and a Raspberry Pi screws set.

Overview

The Waveshare ARPI600 is a versatile adapter board designed to bridge the Raspberry Pi and Arduino ecosystems. By mapping the Raspberry Pi 40-pin GPIO header to standard Arduino pinouts, it lets you attach a wide variety of Arduino shields to your Raspberry Pi. The board also includes an XBee connector for wireless modules, a dedicated sensor interface, and onboard ADC and RTC, making it a compact expansion solution for prototyping and development.

Key Features

  • Arduino shield compatibility: Connect Arduino UNO and Leonardo shields directly to your Raspberry Pi.
  • XBee ready: Onboard XBee connector supports wireless communication modules.
  • Sensor interface: Dedicated header for connecting various sensors.
  • USB to UART: CP2102 chip enables serial port debugging and can be configured as an XBee USB adapter.
  • Onboard ADC: TLC1543 10-bit, 38KSPS, 11 channels (6 for Arduino interface, 5 for sensors).
  • Real-time clock: PCF8563 RTC with 32.768KHz crystal and CR1220 battery holder.

Specifications Explained

The 10-bit ADC (TLC1543) provides 11 channels for analog input, with 6 channels routed to the Arduino interface and 5 to the sensor header, allowing your Raspberry Pi to read analog signals. The PCF8563 RTC keeps accurate time even when the main power is off, thanks to the optional CR1220 backup battery. The CP2102 USB-to-UART bridge simplifies serial communication and debugging. Jumper blocks for UART, RTC, Arduino AD, I2C, and SPI let you configure the board for different use cases. The compact 85 x 63.8 mm PCB and 94 g weight make it easy to integrate into projects.

Compatibility and Requirements

The ARPI600 supports Raspberry Pi series boards and Jetson Nano via the standard 40-pin GPIO header. It is compatible with Arduino UNO and Leonardo shields. XBee modules can be connected via the onboard XBee connector. A CR1220 button battery is required for RTC backup (not included). The package includes a USB type A to mini-B cable and a Raspberry Pi screws set for mounting.

Typical Uses

This board is ideal for makers who want to reuse Arduino shields with a Raspberry Pi, for wireless projects using XBee modules, for data logging with RTC timestamping, and for sensor interfacing where analog inputs are needed. It also serves as a handy USB-to-UART adapter for serial debugging.

What's in the Box

  • 1 x ARPI600 adapter board
  • 1 x USB type A plug to mini-B plug cable
  • 1 x Raspberry Pi screws set
Waveshare Adapter Board for Arduino & Raspberry Pi

Quick specs

Board Type
Adapter Board
IC
TLC1543, AD Converter
RTC (Real Time Clock)
PCF8563
Length (mm)
85
Width (mm)
63.8
Weight (g)
94
See all specifications