Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this bluetooth and nrf modules is a good fit for makers, students and electronics hobbyists. Main specs: communication distance(m) (open outdoor@1M data rate): 30m; frequency 2.4GHz; operating voltage 2.0V ~ 3.6V. Check that your power source supplies 2 to 3.6 before connecting it.

Key Highlights

  • Wireless connection
  • Communication Distance(m): (open outdoor@1M data rate): 30m
  • Frequency: 2.4GHz
  • Operating Voltage: 2.0V ~ 3.6V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Voltage Rating2 to 3.6
Communication Distance(m)(open outdoor@1M data rate): 30m
Frequency2.4GHz
Operating Voltage2.0V ~ 3.6V
Pin Header Pitch2.00mm
Antenna TypeOnboard PCB Antenna
Length (mm)94.74
Width (mm)49.78
Weight (g)10
Operating Temperature (°C)-40℃ ~ 85℃
Shipping Weight0.015 kg
Shipping Dimensions10 × 10 × 2 cm

Overview

The Bluetooth 4.0 Eval Board, made by WAVESHARE, is listed in our bluetooth and nrf modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Voltage Rating: 2 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Communication Distance(m): (open outdoor@1M data rate): 30m
  • Frequency: 2.4GHz (make sure the rest of your system works at this frequency)
  • Operating Voltage: 2.0V ~ 3.6V (match this to your power supply; too high a voltage can damage the part)
  • Pin Header Pitch: 2.00mm
  • Antenna Type: Onboard PCB Antenna
  • Length (mm): 94.74 (measure your mounting space before ordering)
  • Width (mm): 49.78 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Bluetooth 4.0 Eval Board is a development/evaluation kit designed for nRF51822, consists of the motherboard BLE400.
What's on the BLE400:
  1. MCU pins expansion connector
  2. I2C interface
  3. SPI interface
  4. 5V/3.3V power input/output: usually used as power output, also common-grounding with other user board.
  5. Debugging interface
  6. UART interface
  7. Battery holder
  8. User LEDs
  9. User keys
  10. Reset button
  11. USB TO UART jumper
  12. LEDs & Keys jumper
Applications:
  1. Wearable devices
  2. Bluetooth intelligent application
  3. Mobile phone accessories
  4. RFID labels
  5. Smart home appliances
  6. Industry control
  7. Data acquisition system

 Features:

  1. 2.4 GHz multiprotocol RF transceiver
  2. ARM Cortex-M0 32 bit processor
  3. 128 bit AES HW encryption
  4. 256kB flash & 32kB RAM
  5. Programmable Peripheral Interconnect (PPI)
  6. 10 bit ADC
  7. Programmable output power: -20 to +4 dBm
  8. Independent application development and protocol stack
  9. Global separate power management

Package Includes:

1 x Bluetooth 4.0 Eval Board

Quick specs

Voltage Rating
2 to 3.6
Communication Distance(m)
(open outdoor@1M data rate): 30m
Frequency
2.4GHz
Operating Voltage
2.0V ~ 3.6V
Pin Header Pitch
2.00mm
Antenna Type
Onboard PCB Antenna
See all specifications