
1 / 3 · Click to enlarge
AI Summary
This Waveshare module adds CAN bus connectivity to the Raspberry Pi Pico via SPI, using the MCP2515 controller and SIT65HVD230DR transceiver. It supports long-range communication at bit rates from 5K to 1000Kbps.
Key Highlights
- Standard Raspberry Pi Pico header for direct plug-in
- MCP2515 CAN controller with SIT65HVD230DR transceiver
- SPI interface for communication with Pico
- Supports bit rates from 5K to 1000Kbps
- Online development resources with C/C++ and MicroPython examples
Ideal For
- Makers building CAN bus projects with Raspberry Pi Pico
- Automotive hobbyists logging vehicle data
- Industrial automation engineers prototyping control systems
- Students learning CAN protocol with MicroPython or C/C++
- Robotics developers needing reliable long-distance communication
Buying Tip
Remember that a CAN bus network requires proper termination resistors (120Ω at each end) and a common ground between nodes for reliable operation.
Elecvora expert review
Our verdict
The Waveshare CAN Bus Module (B) is a straightforward, well-built solution for adding CAN connectivity to the Raspberry Pi Pico. It offers the essential components and resources needed for reliable long-distance communication.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Plug-and-play with standard Pico header
- Uses industry-standard MCP2515 and SIT65HVD230DR chips
- Wide bit rate range for various applications
- Online examples in C/C++ and MicroPython
Cons
- Requires external CAN bus termination and wiring
- No onboard termination resistor or configuration jumpers
- Limited to Pico form factor, not other boards
Best for
Pico users needing CAN bus connectivity for automotive, industrial, or robotics projects
Not ideal for
Those wanting a solderless, all-in-one CAN solution with built-in termination
Specifications
| Item Type | Other Board |
|---|---|
| Compatibility | Pi Pico |
| Board Type | CAN Bus Module |
| Can controller | MCP2515 |
| Can transceiver | SIT65HVD230DR |
| Communication | BUS SPI |
| Baud Rate (bps) | 5K~1000Kbps |
| Shipping Weight | 0.006 kg |
| Shipping Dimensions | 11 × 8 × 1 cm |
What's in the box
- 1 x Waveshare CAN Bus Module (B) for Raspberry Pi Pico
Frequently Asked Questions
What is included with the module?
Does this module work with all Raspberry Pi Pico models?
What power supply does the module require?
Can I use this module with Arduino or other microcontrollers?
What development resources are available?
How do I set the CAN bit rate?
Overview
The Waveshare CAN Bus Module (B) is an add-on board designed to give the Raspberry Pi Pico CAN bus capability. It integrates the MCP2515 CAN controller and the SIT65HVD230DR CAN transceiver, enabling the Pico to send and receive CAN frames over long distances. The module connects to the Pico through the SPI bus, using the standard Pico header footprint for a secure, solder-free fit on compatible Pico boards.
Key Features
- Standard Pico header: The board matches the Raspberry Pi Pico pinout, so it mounts directly onto the Pico without additional wiring.
- CAN controller and transceiver: The MCP2515 handles CAN protocol logic, while the SIT65HVD230DR provides the physical layer interface for the bus.
- SPI communication: Data transfer between the Pico and the CAN controller uses the SPI interface, which is supported by the Pico's hardware.
- Wide bit rate range: Supports CAN bit rates from 5 Kbps to 1000 Kbps, accommodating slow sensor networks and faster control loops.
- Development resources: Online examples in C/C++ and MicroPython help you integrate the module into your projects quickly.
Specifications Explained
MCP2515 CAN controller: This chip implements the CAN protocol, handling message framing, error detection, and filtering. It offloads these tasks from the Pico, ensuring reliable communication.
SIT65HVD230DR transceiver: This component converts the digital signals from the controller into differential signals suitable for the CAN bus, providing noise immunity and long-distance drive capability.
SPI interface: The Pico communicates with the MCP2515 over SPI, a common and fast serial protocol. This leaves other Pico peripherals free for your application.
Bit rate 5K–1000Kbps: The module can be configured for different bus speeds. Lower speeds allow longer cables, while higher speeds suit shorter, high-traffic networks.
Compatibility and Requirements
The module is compatible with Raspberry Pi Pico series boards. It requires a Pico board to operate and uses the SPI bus for communication. No additional components are needed beyond the Pico and a CAN bus connection. Development resources are available online for C/C++ and MicroPython.
Typical Uses
- Automotive diagnostics and data logging
- Industrial control and automation
- Robotics and motor control
- Sensor networks in vehicles or machinery
- Educational projects learning CAN protocol
What's in the Box
1 x Waveshare CAN Bus Module (B) for Raspberry Pi Pico.
Quick specs
- Item Type
- Other Board
- Compatibility
- Pi Pico
- Board Type
- CAN Bus Module
- Can controller
- MCP2515
- Can transceiver
- SIT65HVD230DR
- Communication
- BUS SPI



















