
1 / 4 · Click to enlarge
At a glance
Made by WAVESHARE, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type HAT; compatibility Pi Series; hat type GNSS HAT.
Key Highlights
- Item Type: HAT
- Compatibility: Pi Series
- HAT Type: GNSS HAT
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | HAT |
|---|---|
| Compatibility | Pi Series |
| HAT Type | GNSS HAT |
| Shipping Weight | 0.225 kg |
| Shipping Dimensions | 16 × 11 × 5 cm |
Overview
The Waveshare Cat-1/GNSS HAT for Raspberry Pi, Based On SIM7670G module, Global Multi-band LTE 4G Cat-1 support, GNSS positioning, 3x USB 2.0 extended ports, made by WAVESHARE, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: HAT
- Compatibility: Pi Series
- HAT Type: GNSS HAT
- Shipping Weight: 0.225 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 16 × 11 × 5 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
- Supports protocols including TCP/IP, HTTP(s), MQTT(s), FTP(s), and SSL
- Supports RNDIS, NDIS and ECM dial-up
- Supports GPS, GLONASS, Galileo, BeiDou positioning
- Onboard USB Type-A and Type-C interfaces, for testing AT Commands, network communication, and so on
- Extended 3x USB 2.0 Type-A ports for the host devices such as Raspberry Pi, Windows PC
- Reserved control pads of the SIM7670G module such as UART and USB pins, make it easy to connect with other host boards
- SIM card slot, supports 1.8V/3V SIM card
- 6x LED indicators, easy to monitor the module operating status and USB connecting status
- Comes with online development resources and manual (examples for Raspberry Pi/Jetson Nano/STM32)
Specifications:
COMMUNICATION PARAMETERS- Frequency band: LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28, B66 - LTE-TDD:B34, B38, B39, B40, B41
- Data transmission: ≤5Mbps (UL) / ≤10Mbps (DL)
- GNSS: GPS, GLONASS, Galileo, BeiDou
- Power supply: 5V
- Logic level: 3.3V
- Dimensions: 85 × 56.7mm
Package Includes:
1 x SIM7670G Cat-1/GNSS HAT
1 x USB-A to USB-C cable
1 x GPS Antenna
1 x LTE Antenna
1 x 2×20PIN female pinheader
1 x USB 3.0 Adapter
1 x USB 2.0 Adapter
1 x Screws pack
Quick specs
- Item Type
- HAT
- Compatibility
- Pi Series
- HAT Type
- GNSS HAT
- Shipping Weight
- 0.225 kg
- Shipping Dimensions
- 16 × 11 × 5 cm



















