
1 / 5 · Click to enlarge
At a glance
Made by WAVESHARE, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type Other Board; compatibility Pi Pico; board type Driver Module. Check that your power source supplies 6~12V (VIN terminals) before connecting it.
Key Highlights
- Item Type: Other Board
- Compatibility: Pi Pico
- Board Type: Driver Module
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Other Board |
|---|---|
| Compatibility | Pi Pico |
| Board Type | Driver Module |
| Operating Voltage (VDC) | 6~12V (VIN terminals) |
| Logic level | 3.3V |
| PWM Driver | PCA9685 |
| Motor Driver | TB6612FNG |
| Control Interface | I2C |
| Dimensions (L x W x H) mm | 65 x 56 mm |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 7 × 6 × 3 cm |
Overview
The Waveshare DC Motor Driver Module for Raspberry Pi Pico Driving up to 4x DC Motors, made by WAVESHARE, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Other Board
- Compatibility: Pi Pico
- Board Type: Driver Module
- Operating Voltage (VDC): 6~12V (VIN terminals) (match this to your power supply; too high a voltage can damage the part)
- Logic level: 3.3V
- PWM Driver: PCA9685
- Motor Driver: TB6612FNG
- Control Interface: I2C (confirm your cable or board uses the same connector)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Raspberry PI Pico with Headers and Micro USB Cable
Pin Configuration:
Note: A Raspberry Pi Pico is not included with this hat - Click here to buy.
Features:
- Compatible with the Raspberry Pi Pico
- I2C controlled, supports 32x different I2C addresses by setting the 5 address jumpers
- Onboard PCA9685 chip, provides 12-bit hardware PWM to adjust motor speed
- Onboard TB6612FNG dual H-bridge motor driver
- Integrates 5V regulator, up to 3A output current, can be powered from a battery through the VIN terminal
- Breaks out unused pins of the Pico for easy extension
Useful Links:
User Guide and LibrariesPackage Includes:
1 x Waveshare 4 DC Motor Driver HAT for Raspberry Pi PicoQuick specs
- Item Type
- Other Board
- Compatibility
- Pi Pico
- Board Type
- Driver Module
- Operating Voltage (VDC)
- 6~12V (VIN terminals)
- Logic level
- 3.3V
- PWM Driver
- PCA9685




















