Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Other IoT Boards; pin header pitch 40pin pin header; usb USB 3.2 gen1 × 2.

Key Highlights

  • Item Type: Other IoT Boards
  • Pin Header Pitch: 40pin pin header
  • USB: USB 3.2 gen1 × 2

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeOther IoT Boards
Pin Header Pitch40pin pin header
USBUSB 3.2 gen1 × 2
Video OutputVideo hdmi × 2, supports 4k 30fps output
Input Power (W)5v/2.5a
Connector TypeHDMI
EthernetRJ45 Gigabit
Displaymipi dsi port (15pin 1.0mm FPC connector)
Camera Detailsmipi csi-2 port × 2 (15pin 1.0mm fpc connector)
Dimensions (L x W x H) mm99.6 × 87.0mm
Shipping Weight0.092 kg
Shipping Dimensions11 × 11 × 3 cm

Overview

The Waveshare Dual Gigabit Ethernet 5G/4G Base Board Designed for Raspberry Pi Compute Module 4, made by WAVESHARE, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Other IoT Boards
  • Pin Header Pitch: 40pin pin header
  • USB: USB 3.2 gen1 × 2
  • Video Output: Video hdmi × 2, supports 4k 30fps output (confirm your cable or board uses the same connector)
  • Input Power (W): 5v/2.5a
  • Connector Type: HDMI (confirm your cable or board uses the same connector)
  • Ethernet: RJ45 Gigabit
  • Display: mipi dsi port (15pin 1.0mm FPC connector) (measured diagonally; compare with the space you have before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a Waveshare Dual Gigabit Ethernet 5G/4G Base Board Designed for Raspberry Pi Compute Module 4. It is suitable for evaluating the Raspberry Pi CM4 or being integrated into end products.

Whats on Board:

  1. CM4 socket: suitable for all variants of Compute Module 4
  2. 40PIN GPIO header: for connecting sorts of HATs
  3. RJ45 Gigabit Ethernet dual RJ45 Gigabit Ethernet, 10/100/1000M compatible ETHERNET 0: CM4 original ETH ETHERNET 1: USB extended ETH
  4. USB 3.2 ports: 3x USB 3.2 Gen1, for connecting sorts of USB devices
  5. HDMI connectors: 2x HDMI, supports 4K 30fps output
  6. CAM: 2x MIPI CSI camera ports
  7. DC power supply: 7~36V DC wide voltage range power input
  8. Dual LED indicators red: Raspberry Pi power indicator green: Raspberry Pi operating status indicator
  9. Micro SD card slot: for connecting a Micro SD card with pre-burnt image (Lite variant ONLY)
  10. FAN header: for connecting cooling fan, allows speed adjustment and measurement
  11. DISP0 MIPI DSI display port
  12. USB SLAVE port:for burning system image into Compute Module 4 eMMC variants
  13. RTC battery holder: supports CR1220 button cell
  14. RTC interruption configuration PI-RUN: CM4 will reboot on RTC interruption GN-EN: CM4 power-down on RTC interruption D4: D4 pin is triggered on RTC interruption
  15. IO-VREF selection:set the CM4 IO logic level as 3.3V or 1.8V
  16. FAN power supply selection:select 5V or 12V power to drive the fan
  17. System function configuration BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD card
  18. RTC/FAN I2C bus selection SDA0/SCL0: I2C-10 is shared with CSI/DSI GPIO3/2: I2C-1 is shared with 40PIN header
  19. RTL8153:USB Gigabit Ethernet chip
  20. EMC2301:fan controller allows fan speed adjustment and measurement
  21. VL805:USB 3.0 HUB

  Connection image and pinout:

 

Useful link:

For Software setup, please follow this tutorial.

Package Includes:

1 x Waveshare Dual Gigabit Ethernet 5G/4G Base Board

Quick specs

Item Type
Other IoT Boards
Pin Header Pitch
40pin pin header
USB
USB 3.2 gen1 × 2
Video Output
Video hdmi × 2, supports 4k 30fps output
Input Power (W)
5v/2.5a
Connector Type
HDMI
See all specifications