Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Round Display Development Board; main control (mcu) ESP32-C3FH4; operating voltage 3.3V. Check that your power source supplies 3.3V before connecting it.

Key Highlights

  • Item Type: Round Display Development Board
  • Main control (MCU): ESP32-C3FH4
  • Operating Voltage: 3.3V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeRound Display Development Board
Main control (MCU)ESP32-C3FH4
Operating Voltage3.3V
Current20mA ( Backlight)
Communication Interface4-wire SPI
Display Size (Inch)0.71 inch
Resolution160 × 160 pixels
Display PanelIPS
DriverGC9D01
Length (mm)20.12
Width (mm)22.3
Shipping Weight0.013 kg
Shipping Dimensions6 × 6 × 2 cm

Overview

The Waveshare ESP32-C3 0.71inch Round Display Development Board, Based on ESP32-C3 Single-core Processor, made by WAVESHARE, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Round Display Development Board (measured diagonally; compare with the space you have before ordering)
  • Main control (MCU): ESP32-C3FH4 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Operating Voltage: 3.3V (match this to your power supply; too high a voltage can damage the part)
  • Current: 20mA ( Backlight) (your supply must deliver at least this much current)
  • Communication Interface: 4-wire SPI (confirm your cable or board uses the same connector)
  • Display Size (Inch): 0.71 inch (measured diagonally; compare with the space you have before ordering)
  • Resolution: 160 × 160 pixels
  • Display Panel: IPS (measured diagonally; compare with the space you have before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Waveshare ESP32-C3 0.71inch Round Display Development Board  is a microcontroller development board with 2.4GHz Wi-Fi and Bluetooth BLE 5 support. Onboard 0.71inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI applications based on the ESP32-C3 such as low-power AI emulation eyes, watches, etc. ESP32-C3 Touch LCD 0.71, front view and features

Features:

  1. Low-power SoC equipped with RISC-V 32-bit single-core processor, up to 160MHz main frequency
  2. Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE)
  3. 400KB of SRAM and 384KB ROM, and 4MB of onboard Flash memory
  4. Onboard 0.71inch LCD display, 160×160 resolution, IPS panel
  5. Built-in battery recharge management circuit, reserved VBAT solder joints, for connecting external Lithium battery power supply
  6. Adapting some GPIO solder pads for external expansion applications
  7. Supports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios

Package Includes:

1 x Waveshare ESP32-C3 0.71inch Round Display Development Board, Based on ESP32-C3 Single-core Processor

Quick specs

Item Type
Round Display Development Board
Main control (MCU)
ESP32-C3FH4
Operating Voltage
3.3V
Current
20mA ( Backlight)
Communication Interface
4-wire SPI
Display Size (Inch)
0.71 inch
See all specifications