
1 / 5 · Click to enlarge
AI Summary
A Waveshare ESP32-C6 development board combining a 1.54-inch 240 x 240 IPS LCD with Wi-Fi 6, BLE 5 and dual microphones. It gives you a ready-made display, audio front end and 6-axis IMU on one compact RISC-V platform.
Key Highlights
- ESP32-C6 RISC-V single-core processor clocked up to 160MHz
- 1.54-inch IPS LCD, 240 x 240 pixels, 262K colours
- 2.4GHz Wi-Fi 6, Bluetooth 5/BLE and IEEE 802.15.4
- Dual-microphone array with ES7210 ADC and ES8311 codec
- QMI8658 6-axis IMU, TF card slot and USB Type-C
- Programmable buttons and expansion interfaces for prototyping
Ideal For
- IoT developers building display-based control panels
- Makers exploring Zigbee 3.0 or Thread with IEEE 802.15.4
- Engineers prototyping audio capture and playback devices
- Students learning ESP-IDF or Arduino on RISC-V hardware
- Product teams needing a compact display and IMU platform
Buying Tip
Check that your project does not rely on touch input, since this variant uses buttons only, and plan for a separate 3.7V MX1.25 battery if you need untethered operation.
Elecvora expert review
Our verdict
This is a well-equipped ESP32-C6 board that removes the wiring work normally needed to add a display, microphones and an IMU. It suits developers who want a compact, connected platform and are comfortable working in ESP-IDF or Arduino.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Display, audio front end and IMU integrated on one board
- Wi-Fi 6, BLE 5 and IEEE 802.15.4 in a single module
- 16MB NOR flash and TF card slot for storage
- USB Type-C plus battery header for flexible power
Cons
- No touch control on this variant
- Battery not included
- Requires familiarity with ESP-IDF or Arduino to get started
Best for
IoT and audio-enabled display prototypes on ESP32-C6
Not ideal for
Buyers wanting a touchscreen or a battery-included kit
Specifications
| Shipping Weight | 0.054 kg |
|---|---|
| Shipping Dimensions | 11 × 8 × 3 cm |
What's in the box
- 1 x ESP32-C6 1.54-inch LCD Display Development Board
- 1 x PC insulating sheet
Frequently Asked Questions
Does this board include a touchscreen?
Which development environments are supported?
How do I power the board?
What wireless standards does it support?
Is a battery included in the box?
What is the display resolution and size?
Overview
The Waveshare ESP32-C6 1.54-inch LCD Display Development Board packs a display, wireless connectivity and an audio front end onto a single compact board. At its centre is the ESP32-C6, a 32-bit RISC-V single-core processor running at up to 160MHz with 512KB SRAM, 320KB ROM and 16MB of NOR flash. That is enough headroom for graphical interfaces, sensor handling and connected firmware in one project.
The 1.54-inch IPS LCD offers 240 x 240 resolution and 262K colours, driven over a 4-wire SPI interface by an ST7789 controller. Because the panel is IPS, colours and contrast stay consistent when viewed from an angle, which suits handheld devices and panel-mounted displays.
Key Features
- Wireless options: 2.4GHz Wi-Fi 6 and Bluetooth 5/BLE, plus IEEE 802.15.4 for Zigbee 3.0 and Thread.
- Audio hardware: a dual-microphone array with ES7210 audio ADC, ES8311 codec and NS4150B amplifier.
- Motion sensing: QMI8658 6-axis IMU combining a 3-axis accelerometer and 3-axis gyroscope.
- Storage and I/O: TF card slot, USB Type-C port, programmable buttons and expansion interfaces.
- Power flexibility: a 3.7V MX1.25 lithium battery header for battery-powered builds.
Specifications Explained
The ESP32-C6's 160MHz RISC-V core and 512KB SRAM handle display refresh, audio capture and network tasks together, while 16MB of NOR flash leaves room for assets, fonts and application code. The 240 x 240 panel is square, which simplifies layout work for dashboards, gauges and menus.
On the audio side, the ES7210 ADC digitises the dual-microphone signals and the ES8311 codec manages playback, with the NS4150B amplifier driving a speaker. The QMI8658 IMU adds orientation and motion data without an external module. The TF card slot is useful for logging or storing media, and the USB Type-C port handles programming and power.
Compatibility and Requirements
The board is supported by ESP-IDF and the Arduino IDE. A 3.7V lithium battery connects through the MX1.25 header if you want to run it untethered; the battery is not included. Note that this version has no touch control, so interaction relies on the programmable buttons and any external inputs you add.
Typical Uses
Typical projects include IoT control panels, Zigbee or Thread sensor nodes, audio capture and voice-related experiments, motion-aware gadgets, portable data loggers and compact user interfaces. The combination of display, microphones and IMU makes it a good fit for prototypes that need more than a bare microcontroller.
What's in the Box
- 1 x ESP32-C6 1.54-inch LCD Display Development Board
- 1 x PC insulating sheet



















