Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.025 kg.

Key Highlights

  • Shipping Weight: 0.025 kg

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Shipping Weight0.025 kg
Shipping Dimensions50 × 35 × 10 cm

Overview

The Waveshare ESP32-C6 1.64inch AMOLED Touch Display Development Board, 280 × 456 Resolution, 16.7M Color, QSPI Interface, Supports Wi-Fi 6 And BLE 5 with With Pre-Soldered Header, made by WAVESHARE, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Shipping Weight: 0.025 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 50 × 35 × 10 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The ESP32-C6-Touch-AMOLED-1.64 is a low-cost, high-performance microcontroller development board designed by Waveshare. Onboard 1.64inch AMOLED display, capable of smoothly running GUI programs such as LVGL.

Onboard rich peripheral resources such as QMI8658 6-axis IMU, TF card slot, and Lithium Batt header, while also adapting USB, UART, I2C and multiple MUX_GPIO interfaces for strong expandability. It is ideal for the quick development of the HMI and other ESP32-C6 applications.

Zigbee/Thread support depends on software stack (ESP-IDF / OpenThread / ZBOSS)


Features:

  1. ESP32-C6 Wi-Fi 6, BLE 5, Zigbee 3.0 support
  2. 1.64-inch AMOLED capacitive touch display
  3. Pre-soldered GPIO headers for easy prototyping and direct connection
  4. 280×456 resolution with 16.7M color output
  5. Built-in QMI8658 6-axis IMU sensor
  6. Integrated TF card slot for storage expansion
  7. USB Type-C for power, programming, and debugging
  8. Supports ESP-IDF and Arduino development platforms
  9. Lithium battery charging interface onboard

Useful Link : https://docs.waveshare.com/ESP32-C6-Touch-AMOLED-1.64


Specifications:

  1. Module: ESP32-C6-Touch-AMOLED-1.64
  2. Display Type: AMOLED capacitive touch
  3. Touch IC: FT6146
  4. Processor Architecture: Single-core RISC-V + low-power RISC-V subsystem
  5. Clock Speed: Up to 160MHz + 20MHz LP core
  6. RAM: 320KB ROM, 512KB HP SRAM, 16KB LP SRAM
  7. Flash: 16MB external
  8. Brightness: 350 cd/m²
  9. Contrast ratio: 60000:1
  10. Viewing angle: 178°
  11. Driver IC: CO5300
  12. Interface: USB Type-C, UART, I2C, QSPI
  13. Wi-Fi 6 / BLE 5 / IEEE 802.15.4 (Zigbee 3.0 + Thread)
  14. Storage: TF card slot supported
  15. Battery: 3.7V Li-ion support with MX1.25 charging header
  16. Power: 5V via USB Type-C input, 3.3V logic level
  17. IMU Sensor: QMI8658 6-axis
  18. Form Factor: Embedded touch development board
  19. Diamenions: 44 x 29.12 x 9.60 mm
  20. Weight: 0.016 kg

Package Includes:

1 x Waveshare ESP32-C6 1.64inch AMOLED Touch Display Development Board, 280 × 456 Resolution With Pre-Soldered Header

Quick specs

Shipping Weight
0.025 kg
Shipping Dimensions
50 × 35 × 10 cm
See all specifications