
1 / 3 · Click to enlarge
AI Summary
A compact ESP32-S3 AIoT development board with two 1.28-inch round IPS LCDs, Wi-Fi, Bluetooth 5.0 and dedicated audio codecs. It gives interactive projects a ready-made dual-display face with battery charging and expansion built in.
Key Highlights
- Dual 1.28-inch round IPS LCDs at 240 x 240 resolution
- ESP32-S3 dual-core Xtensa LX7 processor up to 240MHz
- 16MB flash and 2MB PSRAM for firmware and buffers
- 2.4GHz Wi-Fi 802.11 b/g/n and Bluetooth 5.0 BLE
- ES8311 audio output and ES7210 audio input codecs
- 3.7V Li-ion battery header with onboard charge circuit
Ideal For
- Makers building expressive robot or smart toy faces
- Developers prototyping HMI and audio-enabled IoT devices
- Wearable and compact display project builders
- Educators teaching ESP32-S3 and dual-display programming
- Creative coders exploring animated round-screen interfaces
Buying Tip
Confirm your project does not need touch input, since this version ships without touch panels, and budget for a separate 3.7V Li-ion battery for portable use.
Elecvora expert review
Our verdict
The Waveshare ESP32-S3 Double Eye is a well-equipped platform for anyone who wants dual round displays, wireless connectivity and audio support on one compact board. It is strongest for character-driven interfaces and audio IoT prototypes rather than general-purpose dev work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Two round 240 x 240 IPS displays already integrated
- ESP32-S3 with 16MB flash and 2MB PSRAM
- Onboard Wi-Fi, Bluetooth 5.0 BLE and audio codecs
- Li-ion battery header with charge circuit and indicator
Cons
- Touch is not included on this version
- Battery must be purchased separately
- Compact SH1.0 and FPC connectors need care when handling
Best for
Robot faces, smart toys and audio-enabled IoT interfaces
Not ideal for
Projects that require touch input or large single-screen displays
Specifications
| Item Type | AIoT Development Board with Touch Display |
|---|---|
| RAM | 2MB PSRAM, 512KB SRAM |
| Processor Type | Xtensa 32-bit LX7 Dual-Core |
| Flash Memory | 16MB |
| Display | 2 × 1.28" IPS LCD, 240 × 240 resolution |
| Wireless | 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 5.0 BLE |
| Main control (MCU) | ESP32-S3R8 Xtensa 32-bit LX7 Dual-core, up to 240MHz |
| Audio input/output Port | ES8311 (Output), ES7210 (Input) |
| Battery support | 3.7V Li-ion battery header, charge circuit with indicator |
| TF CARD SLOT | Supports SPI mode |
| I/O Interface | GPIO, I2C, UART via SH1.0 header |
| Antenna Type | Onboard ceramic |
| USB Port | USB Type-C |
| Buttons | BOOT, RESET |
| Length (mm) | 93 |
| Width (mm) | 33 |
| Weight (g) | 26 |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 11 × 8 × 2 cm |
What's in the box
- 1 x Waveshare ESP32-S3 1.28inch Double Eye Round LCD AIoT Development Board without Touch
- 1 x SH1.0 14PIN cable, approximately 100mm
- 1 x FFC 18PIN cable, approximately 200mm
- 1 x 8Ω 2W MX1.25 2PIN speaker
Frequently Asked Questions
Does this board include touch displays?
What power source does the board need?
How do I connect a speaker?
Can I add a microSD card?
What expansion options are available?
Is a battery included in the box?
Overview
The Waveshare ESP32-S3 Double Eye is an AIoT development board that puts two 1.28-inch round IPS LCDs at the centre of its design. Each display offers 240 x 240 resolution, creating a distinctive paired-screen format that works well for expressive interfaces, animated eyes and status panels. Behind the displays sits an ESP32-S3R8 microcontroller with a dual-core Xtensa 32-bit LX7 running at up to 240MHz, supported by 16MB of flash and 2MB of PSRAM.
Connectivity comes through 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5.0 BLE, so the board can join networks, stream data or pair with nearby devices. Audio is handled by an ES8311 output codec and an ES7210 input codec, with a speaker connection provided in the box.
Key Features
- Dual round displays: two 1.28-inch IPS LCDs at 240 x 240 for paired visual output.
- ESP32-S3R8 core: dual-core Xtensa LX7 at up to 240MHz with 2MB PSRAM and 512KB SRAM.
- Generous storage: 16MB flash plus a TF card slot supporting SPI mode.
- Wireless built in: 2.4GHz Wi-Fi and Bluetooth 5.0 BLE with an onboard ceramic antenna.
- Audio ready: ES8311 output and ES7210 input codecs with a speaker header.
- Battery friendly: 3.7V Li-ion battery header with charge circuit and indicator.
- Expansion: GPIO, I2C and UART through an SH1.0 header, plus FPC connectors.
Specifications Explained
The ESP32-S3R8 gives you a modern dual-core MCU with enough headroom for display driving, wireless communication and audio processing in one project. The 2MB PSRAM is useful when you need frame buffers or larger data structures, while 16MB flash leaves room for firmware and assets. The 512KB SRAM supports everyday runtime tasks.
Two 240 x 240 IPS panels provide consistent colour and viewing angles in a small footprint. The board measures 93mm long and 33mm wide and weighs 26g, so it fits compact enclosures and wearable-style builds. A USB Type-C port handles programming and power, and BOOT and RESET buttons simplify flashing. The TF card slot in SPI mode is handy for storing images, audio clips or logs.
Compatibility and Requirements
The board is programmed over USB Type-C and requires a 3.7V Li-ion battery if you want untethered operation; the battery is not included. The SH1.0 14-pin header exposes GPIO, I2C and UART for external modules, and FPC connectors are provided for display-related expansion. Use the included SH1.0 and FFC cables with matching connectors. A 2.4GHz Wi-Fi network is required for wireless networking, and Bluetooth 5.0 BLE is available for low-energy links.
Typical Uses
Typical projects include animated robot faces, smart toy interfaces, HMI control panels, audio-enabled IoT nodes, wearable displays and interactive art pieces. The dual-screen layout is especially suited to character-based designs where two round displays act as eyes.
What's in the Box
- 1 x Waveshare ESP32-S3 1.28-inch Double Eye Round LCD AIoT Development Board without Touch
- 1 x SH1.0 14PIN cable, approximately 100mm
- 1 x FFC 18PIN cable, approximately 200mm
- 1 x 8Ω 2W MX1.25 2PIN speaker

Quick specs
- Item Type
- AIoT Development Board with Touch Display
- RAM
- 2MB PSRAM, 512KB SRAM
- Processor Type
- Xtensa 32-bit LX7 Dual-Core
- Flash Memory
- 16MB
- Display
- 2 × 1.28" IPS LCD, 240 × 240 resolution
- Wireless
- 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 5.0 BLE



















