
1 / 4 · Click to enlarge
At a glance
Made by WAVESHARE, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: main frequency 240MHz; processor Xtensa 32-bit LX7 dual-core, up to 240MHz; display 1.85-inch LCD.
Key Highlights
- Wireless connection
- Main Frequency: 240MHz
- Processor: Xtensa 32-bit LX7 dual-core, up to 240MHz
- Display: 1.85-inch LCD
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Main Frequency | 240MHz |
|---|---|
| Processor | Xtensa 32-bit LX7 dual-core, up to 240MHz |
| Display | 1.85-inch LCD |
| Connectivity | 2.4GHz Wi-Fi & Bluetooth 5 |
| Memory Capacity | 512KB SRAM, 384KB ROM, 16MB Flash, 8MB PSRAM. |
| Shipping Weight | 0.045 kg |
| Shipping Dimensions | 8 × 5 × 3 cm |
Overview
The Waveshare ESP32-S3 1.46inch Round Display Development Board, 412×412, Supports WiFi & Bluetooth, Accelerometer And Gyroscope Sensor, Onboard Speaker And Microphone, ESP32 With Display without cover glass, made by WAVESHARE, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Main Frequency: 240MHz (make sure the rest of your system works at this frequency)
- Processor: Xtensa 32-bit LX7 dual-core, up to 240MHz (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Display: 1.85-inch LCD (measured diagonally; compare with the space you have before ordering)
- Connectivity: 2.4GHz Wi-Fi & Bluetooth 5 (check your phone or controller supports the same Bluetooth version for full range)
- Memory Capacity: 512KB SRAM, 384KB ROM, 16MB Flash, 8MB PSRAM. (more memory leaves room for larger programs and buffers)
- Shipping Weight: 0.045 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 8 × 5 × 3 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
ESP32-S3-Touch-LCD-1.46 is a microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.46inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, it is suitable for the quick development of the HMI and other ESP32-S3 applications.
Note: This display comes without a cover glass.
Features:
- 1.46-inch round display with 412×412 resolution.
- Powered by ESP32-S3 with dual-core processor.
- Integrated WiFi and Bluetooth 5.0 connectivity.
- Built-in accelerometer and gyroscope sensor.
- Onboard speaker and digital microphone.
- USB Type-C interface for power and programming.
- Supports multiple development platforms (Arduino, ESP-IDF, etc.).
- Compact and stylish circular form factor for wearable or IoT applications.
Package Include:
1 x Waveshare ESP32-S3 1.46inch Round Display Development Board, 412×412, Supports WiFi & Bluetooth, Accelerometer And Gyroscope Sensor, Onboard Speaker And Microphone, ESP32 With Display without cover glassQuick specs
- Main Frequency
- 240MHz
- Processor
- Xtensa 32-bit LX7 dual-core, up to 240MHz
- Display
- 1.85-inch LCD
- Connectivity
- 2.4GHz Wi-Fi & Bluetooth 5
- Memory Capacity
- 512KB SRAM, 384KB ROM, 16MB Flash, 8MB PSRAM.
- Shipping Weight
- 0.045 kg



















