Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact ESP32-S3 thermal camera module that captures 80x62 pixel infrared images with ±2℃ accuracy at 25 FPS. WiFi, Bluetooth 5 and a lithium battery header let you build wireless thermal imaging projects from a single board.

Key Highlights

  • 80x62 pixel thermal array with ±2℃ accuracy
  • 56° diagonal, 45° horizontal and 34° vertical field of view
  • 25 FPS refresh rate for real-time thermal imaging
  • ESP32-S3 dual-core LX7 processor at up to 240 MHz
  • 2.4 GHz WiFi and Bluetooth 5 LE with onboard antenna
  • Type-C port plus 3.7V lithium battery header and charge circuit

Ideal For

  • Embedded developers building wireless thermal cameras
  • Makers creating DIY inspection tools
  • Electronics technicians checking component heat
  • Researchers collecting thermal data in the field
  • Smart home and IoT hobbyists adding temperature sensing

Buying Tip

Plan for a 3.7V MX1.25 lithium battery if you want untethered operation, since the module is otherwise powered through its 5V Type-C connection.

Elecvora expert review

Our verdict

A tidy all-in-one thermal imaging board that removes the need for a separate microcontroller and wireless link. It is best suited to developers who are comfortable writing firmware and want compact, connected thermal sensing.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Thermal sensor and ESP32-S3 wireless board combined
  • Generous 8MB PSRAM and 16MB flash for imaging work
  • Battery header with charge/discharge circuit for portable builds
  • Useful expansion through GPIO, I2C and UART pads

Cons

  • No enclosure or display included
  • Requires firmware development to get images out
  • 80x62 resolution limits fine detail at long range

Best for

Developers building connected thermal imaging devices

Not ideal for

Users wanting a plug-and-play handheld thermal camera

Specifications

Model No. / NameThermal Imaging Camera
Accuracy±2℃
Operating Voltage (VDC)5V
Thermal Resolution80×62
Field of View (FOV)56°(D) × 45°(H) × 34°(V)
Refresh Rate (Hz)25 FPS
Operating Temperature (°C)-40℃~85℃
Shipping Weight0.047 kg
Shipping Dimensions10 × 8 × 3 cm

What's in the box

  • 1 x Thermal-45 Camera ESP32 Module
  • 1 x USB Type-A to Type-C cable (~1 m)
  • 1 x Screws pack

Frequently Asked Questions

What resolution does the thermal sensor provide?
The module captures thermal images at 80x62 pixels with an accuracy of ±2℃.
What field of view does the lens cover?
It offers a 56° diagonal, 45° horizontal and 34° vertical field of view.
How is the module powered?
It operates from 5V through the Type-C port, or from a 3.7V lithium battery connected to the onboard MX1.25 header.
Does it support wireless connectivity?
Yes, it includes 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth 5 LE with an onboard antenna.
What comes in the package?
You receive the Thermal-45 Camera ESP32 module, a USB Type-A to Type-C cable of about 1 m, and a screws pack.
What temperature range can it operate in?
The module is rated for operating temperatures from -40℃ to 85℃.

Overview

The Waveshare ESP32-S3 IR Thermal Imaging Camera Module pairs a thermal sensor array with a capable wireless microcontroller on a single compact board. The sensor uses microbolometer and thermopile pixel technology to measure the infrared radiation across its field of view, then converts that data into temperature distribution maps and thermal images. With 80x62 pixels and a 25 FPS refresh rate, it produces live thermal feedback rather than single readings.

At the centre is the ESP32-S3-WROOM-1 with a dual-core Xtensa 32-bit LX7 processor running up to 240 MHz, backed by 512KB SRAM, 384KB ROM, 8MB PSRAM and 16MB external flash. That gives you room to capture, process and stream thermal data without adding a separate host board.

Key Features

  • 80x62 thermal resolution with ±2℃ accuracy
  • 56° diagonal, 45° horizontal and 34° vertical field of view
  • 25 FPS output for smooth real-time imaging
  • 2.4 GHz WiFi (802.11 b/g/n) and Bluetooth 5 LE with onboard antenna
  • Type-C connector for power and data
  • Onboard RGB LED for operating status
  • 3.7V MX1.25 lithium battery header with recharge/discharge circuit
  • 2x10 solder pads exposing 14 GPIO, 1 I2C and 1 UART

Specifications Explained

80x62 pixels is a compact thermal array well suited to close-range inspection and monitoring, where the subject fills the frame. ±2℃ accuracy means readings are dependable for comparative temperature checks and spotting hot or cold areas. The 45° horizontal field of view covers a reasonably wide scene without needing to reposition the camera often.

25 FPS keeps the image responsive when you pan across equipment or watch a process change. The module operates from 5V and is rated for -40℃ to 85℃, so it can work in cold stores, outdoor enclosures and hot equipment rooms alike.

Compatibility and Requirements

The board is programmed through its Type-C port and works with ESP32-S3 development tooling. Wireless projects rely on 2.4 GHz WiFi or Bluetooth 5 LE. For untethered use, connect a 3.7V lithium battery to the MX1.25 header; the onboard circuit handles charging and discharging. External sensors and peripherals can be wired to the exposed GPIO, I2C and UART pads.

Typical Uses

  • Wireless thermal monitoring of electronics and machinery
  • DIY thermal cameras and handheld imagers
  • Building inspection and insulation checks
  • Educational and research projects in embedded thermal sensing
  • Remote temperature alerting over WiFi

What's in the Box

  • 1 x Thermal-45 Camera ESP32 Module
  • 1 x USB Type-A to Type-C cable, approximately 1 m
  • 1 x Screws pack
ESP32-S3 IR Thermal Imaging Camera Module, outline dimensions

Quick specs

Model No. / Name
Thermal Imaging Camera
Accuracy
±2℃
Operating Voltage (VDC)
5V
Thermal Resolution
80×62
Field of View (FOV)
56°(D) × 45°(H) × 34°(V)
Refresh Rate (Hz)
25 FPS
See all specifications