Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact ESP32-S3 development board with a 240 MHz dual-core LX7 processor, 16MB flash and 2MB PSRAM. Its single USB-C port covers both USB and UART development through onboard CH343 and CH334 chips.

Key Highlights

  • 32-bit LX7 dual-core processor running at up to 240 MHz
  • 16MB flash, 512KB SRAM, 384KB ROM and 2MB PSRAM onboard
  • One USB-C port for both USB and UART development
  • 27 multi-function GPIO headers with castellated module edges
  • Camera DVP and parallel LCD interfaces for display builds
  • High-efficiency MP28164 DC-DC buck-boost chip with 2A load current

Ideal For

  • Makers building Wi-Fi and Bluetooth sensor nodes
  • Students learning embedded development with the ESP32-S3
  • Engineers prototyping camera or parallel LCD projects
  • Developers who want USB and UART work on one USB-C port
  • Hobbyists soldering compact modules onto carrier boards

Buying Tip

Check that your project needs the ESP32-S3 feature set and 16MB flash before ordering, and plan for a USB-C cable and the manufacturer's setup tutorial.

Elecvora expert review

Our verdict

The Waveshare ESP32-S3 packs a fast dual-core LX7, generous memory and a wide set of interfaces into a very small board. The single USB-C port with CH343 and CH334 chips is a genuinely convenient touch for development work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 240 MHz dual-core processor with 16MB flash and 2MB PSRAM
  • One USB-C port for both USB and UART development
  • Many interfaces including DVP camera and parallel LCD
  • Castellated edges allow direct soldering to carrier boards
  • Compact size with 27 multi-function GPIO headers

Cons

  • No USB-C cable included
  • Requires separate host computer and toolchain setup
  • Some peripherals may need additional power planning

Best for

Makers and engineers building compact Wi-Fi, camera or display projects

Not ideal for

Beginners who want a fully assembled plug-and-play kit with accessories

Specifications

Item TypeESP32 Based, S3 Variant
Flash Memory16MB
Processor Type32-bit LX7 dual-core processor
Processor32-bit LX7 dual-core processor
SRAM512KB
ROM Capacity384KB
PSRAM2MB
Onboard ChipCH343 and CH334 chips can meet the needs of USB and UART development via a Type-C interface.
Peripheral InterfaceOTG, SPI, I2C, UART, ADC, PWM, and DVP (8-bit ~ 16-bit camera interface), LCD interfaces (8-bit ~ 16-bit parallel RGB, I8080, MOTO6800), etc
USBType-C port
Frequency240
Shipping Weight0.013 kg
Shipping Dimensions9 × 7 × 2 cm

What's in the box

  • 1 x Waveshare ESP32-S3 Microcontroller development board

Frequently Asked Questions

What processor does this board use?
It uses the ESP32-S3R2 with a 32-bit LX7 dual-core processor running at up to 240 MHz, plus 512KB SRAM, 384KB ROM, 2MB PSRAM and 16MB flash.
Can I use one cable for USB and UART development?
Yes. Onboard CH343 and CH334 chips support both USB and UART development through the single USB Type-C port.
What interfaces are available?
The board offers USB OTG, SPI, I2C, UART, ADC, PWM, DVP camera input and parallel LCD interfaces such as 8-bit to 16-bit RGB, I8080 and MOTO6800.
What is included in the package?
The package contains one Waveshare ESP32-S3 Microcontroller development board. A USB-C cable and other accessories are not listed.
How much current can the onboard DC-DC supply?
The MP28164 buck-boost chip supports load currents up to 2A, which helps when peripherals draw more power.
Where can I find setup instructions?
The product data points to a manufacturer tutorial for hardware and software setup; follow that guide to install drivers and configure your toolchain.

Overview

The Waveshare ESP32-S3 is a small, low-cost microcontroller development board for wireless projects. It uses the ESP32-S3R2 as its main chip, which combines a 32-bit LX7 dual-core processor running at up to 240 MHz with integrated 2.4 GHz Wi-Fi and Bluetooth 5 (LE). With 16MB of flash, 512KB SRAM, 384KB ROM and 2MB PSRAM, the board has enough memory for connected applications, data buffering and display or camera work.

Key Features

  • Single USB-C port: Onboard CH343 and CH334 chips support both USB and UART development through one Type-C connector.
  • Stable power: The MP28164 DC-DC buck-boost chip uses PWM fixed-frequency current control and supports load currents up to 2A.
  • Flexible I/O: 27 multi-function GPIO headers are available, and the castellated module edges allow direct soldering to a carrier board.
  • Rich interfaces: Full-speed USB OTG, SPI, I2C, UART, ADC, PWM, DVP camera input (8-bit to 16-bit) and parallel LCD output (8-bit to 16-bit RGB, I8080, MOTO6800).
  • Low-power options: Multiple low-power operating states let you balance communication distance, data rate and power consumption.

Specifications Explained

The 240 MHz dual-core LX7 processor gives you headroom for Wi-Fi stacks, sensor handling and user code at the same time. The 16MB flash stores firmware and assets, while 2MB PSRAM helps with larger buffers such as camera frames or display data. The CH343 and CH334 chips are what make the single USB-C port practical: you can move between USB and UART development without changing hardware. The MP28164 buck-boost stage keeps the supply stable across input conditions and can deliver up to 2A, which matters when peripherals draw current.

Compatibility and Requirements

The board provides USB Type-C connectivity and standard peripheral interfaces including OTG, SPI, I2C, UART, ADC, PWM, DVP and parallel LCD. You will need a USB-C cable and a host computer to program it. Hardware and software setup instructions are available through the manufacturer's tutorial link.

Typical Uses

Common applications include Wi-Fi sensor nodes, IoT prototypes, camera and display experiments, data logging, and general embedded development where a compact board with many interfaces is useful.

What's in the Box

1 x Waveshare ESP32-S3 Microcontroller development board.

Quick specs

Item Type
ESP32 Based, S3 Variant
Flash Memory
16MB
Processor Type
32-bit LX7 dual-core processor
Processor
32-bit LX7 dual-core processor
SRAM
512KB
ROM Capacity
384KB
See all specifications