
1 / 3 · Click to enlarge
At a glance
Made by WAVESHARE, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type ESP32 Based; gnss GPS, BeiDou, GLONASS, Galileo; input power (w) 5V (USB port / 5V pin header), 3.7~4.2V (18650 lithium battery holder / VBAT pin header). Check that your power source supplies 18650 lithium battery holder (18650 battery is NOT included), pin header, USB port before connecting it.
Key Highlights
- Item Type: ESP32 Based
- GNSS: GPS, BeiDou, GLONASS, Galileo
- Input Power (W): 5V (USB port / 5V pin header), 3.7~4.2V (18650 lithium battery holder / VBAT pin header)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | ESP32 Based |
|---|---|
| GNSS | GPS, BeiDou, GLONASS, Galileo |
| Power Supply Voltage (V) | 18650 lithium battery holder (18650 battery is NOT included), pin header, USB port |
| Input Power (W) | 5V (USB port / 5V pin header), 3.7~4.2V (18650 lithium battery holder / VBAT pin header) |
| Shipping Weight | 0.190 kg |
| Shipping Dimensions | 17 × 12 × 5 cm |
Overview
The Waveshare ESP32-S3 SIM7670G LTE 4G Development Board, made by WAVESHARE, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: ESP32 Based
- GNSS: GPS, BeiDou, GLONASS, Galileo
- Power Supply Voltage (V): 18650 lithium battery holder (18650 battery is NOT included), pin header, USB port (note the battery type so you can order spares or the right charger)
- Input Power (W): 5V (USB port / 5V pin header), 3.7~4.2V (18650 lithium battery holder / VBAT pin header) (note the battery type so you can order spares or the right charger)
- Shipping Weight: 0.190 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 17 × 12 × 5 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Adopts ESP32-S3R2 chip with high-performance Xtensa® 32-bit LX7 dual-core processor, capable of running at 240 MHz.
- Built in 512KB SRAM, 384KB ROM, 2MB of PSRAM, and 16MB Flash memory.
- Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, featuring superior RF performance.
- Equipped with the SIM7670G cellular module, supports 4G Cat-1 networking, GNSS positioning and other functions.
- Onboard USB switching IC and DIP switch for switching to use the USB interface of SIM7670G, suitable for connecting with PC for dial-up internet or debugging of SIM7670G module.
- Onboard lithium battery charging, solar charging, power management, battery capacity measurement, and related protection circuits, supports USB and solar charging with real-time battery capacity measurement.
- Onboard 18650 battery holder (18650 battery is NOT included), adapting VBAT pin header for connecting to external 3.7V lithium battery, with anti-reverse protection.
- Rich peripheral interfaces such as camera interface, TF card slot, USB port, 38PIN header, etc., easy to expand and achieve various functions.
- Onboard multiple DIP switches for camera on/off, switching USB channels to avoid interface conflict, and setting power on/off for some circuits to reduce power consumption.
- Comes with GNSS high-precision ceramic antenna, OV2640 camera, acrylic case, etc., easy to develop various applications.
- Comes with online development resources and manual (including tutorials, demos for 4G portable WiFi and other IoT examples).
Package Includes:
- 1 x ESP32-S3-SIM7670G-4G
- 1 x Transparent acrylic case and screws pack
- 1 x GNSS ceramic antenna
- 1 x OV2640 camera
- 1 x 2P screw terminal
- 1 x 40PIN yellow straight pin header
- 1 x USB Type-A to Type-C cable 1m
- 1 x FPC antenna
- 1 x Screwdriver
- 1 x Double-side tape (4PCS)
Quick specs
- Item Type
- ESP32 Based
- GNSS
- GPS, BeiDou, GLONASS, Galileo
- Power Supply Voltage (V)
- 18650 lithium battery holder (18650 battery is NOT included), pin header, USB port
- Input Power (W)
- 5V (USB port / 5V pin header), 3.7~4.2V (18650 lithium battery holder / VBAT pin header)
- Shipping Weight
- 0.190 kg
- Shipping Dimensions
- 17 × 12 × 5 cm



















