
1 / 6 · Click to enlarge
AI Summary
A Raspberry Pi HAT that adds quad-band GSM/GPRS, GNSS positioning and Bluetooth 3.0 connectivity via a 40-pin GPIO header. It lets your Pi make calls, send SMS, access mobile data and determine location using AT commands.
Key Highlights
- Quad-band GSM/GPRS for calls, SMS and mobile data
- GNSS with GPS, GLONASS and Compass support
- Bluetooth 3.0 + EDR for wireless data transfer
- Standard 40-pin GPIO header fits Raspberry Pi series
- SIM card slot and RTC with backup battery holder
- USB-to-UART converter and status LEDs onboard
Ideal For
- Makers building remote monitoring or alert systems
- Students learning cellular and GNSS integration
- Engineers prototyping IoT devices with mobile data
- Hobbyists adding GPS tracking to Raspberry Pi projects
Buying Tip
Remember that a 1.8V or 3V SIM card is required for cellular functions; the Raspberry Pi and SIM card are not included.
Elecvora expert review
Our verdict
The Waveshare GSM/GPRS/GNSS/Bluetooth HAT packs a lot of connectivity into a small, well-designed board. It is a solid choice for Raspberry Pi users who need cellular, positioning and Bluetooth in one add-on.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Comprehensive wireless features in a single HAT
- Easy setup with standard 40-pin GPIO and AT commands
- Includes all necessary antennas and USB cable
- Wide operating temperature range for outdoor use
Cons
- Requires a separate SIM card and backup battery
- Raspberry Pi not included
- Bluetooth 3.0 only, not newer standards
Best for
Raspberry Pi enthusiasts needing multi-protocol wireless connectivity
Not ideal for
Users looking for plug-and-play cellular without AT command knowledge
Specifications
| Item Type | HAT |
|---|---|
| Compatibility | Pi Series |
| HAT Type | GSM HAT, GPRS HAT |
| Operating Temperature (°C) | -40 to 85 |
| Cable Length | 3 |
| Length (mm) | 65 |
| Width (mm) | 30.2 |
| Weight (g) | 20 |
| Shipping Weight | 0.022 kg |
| Shipping Dimensions | 6 × 5 × 2 cm |
What's in the box
- 1 x GSM/GPRS/GNSS HAT
- 1 x GSM Antenna
- 1 x GPS External Antenna (B)
- 1 x Bluetooth Antenna
- 1 x USB type A plug to micro plug cable
- 1 x RPi screws pack (2pcs)
Frequently Asked Questions
Does this HAT work with all Raspberry Pi models?
What type of SIM card do I need?
Can I use the GPS and GSM functions at the same time?
Is a battery included for the RTC?
What is the purpose of the USB-to-UART converter?
How do I control the module?
Overview
The Waveshare GSM/GPRS/GNSS/Bluetooth HAT is a compact expansion board that brings multiple wireless communication capabilities to Raspberry Pi projects. It connects through the standard 40-pin GPIO header and supports quad-band GSM/GPRS, GNSS positioning and Bluetooth 3.0 data transfer. Whether you need to send an SMS alert, make a voice call, fetch data over a mobile network or log location data, this HAT provides the hardware foundation.
Key Features
- Multi-network support: GSM/GPRS quad-band 850/900/1800/1900 MHz with auto search.
- Positioning: GNSS receiver with 33 tracking channels and 99 acquisition channels, supporting GPS, GLONASS and Compass.
- Bluetooth 3.0 + EDR: Enables serial port profile and other data transfer profiles.
- AT command control: Compatible with 3GPP TS 27.007, 27.005 and SIMCom enhanced commands.
- Onboard conveniences: SIM card slot (1.8V/3V), RTC with backup battery holder, CP2102 USB-to-UART converter, and six status LEDs.
Specifications Explained
The quad-band GSM module automatically searches for available networks, with maximum output power of 2W at 850/900 MHz and 1W at 1800/1900 MHz. GPRS multi-slot class 12 is the default, supporting downlink and uplink speeds up to 85.6 kbps. The GNSS receiver offers high sensitivity: -165 dBm tracking and -148 dBm cold start, with a typical cold start time of 28 seconds and hot start under 1 second. Horizontal position accuracy is under 2.5 meters CEP. Bluetooth 3.0 + EDR integrates AT commands and supports profiles such as SPP, OPP and HFP/HSP. The board operates from -40°C to 85°C, measures 65 mm × 30.2 mm and weighs only 20 g.
Compatibility and Requirements
This HAT is designed for Raspberry Pi series boards with a standard 40-pin GPIO header. It requires a SIM card (1.8V or 3V) for cellular functions and a backup battery (not included) for the RTC if you need real-time clock retention. The package includes a USB type A to micro USB cable for UART debugging. Note that the Raspberry Pi itself is not included and must be purchased separately.
Typical Uses
- Remote SMS or call alerts from sensor nodes
- GPS tracking and location logging projects
- IoT gateways needing mobile data backhaul
- Bluetooth data bridges between devices
- Educational projects exploring cellular and GNSS communication
What's in the Box
- 1 x GSM/GPRS/GNSS HAT
- 1 x GSM antenna
- 1 x GPS external antenna (B)
- 1 x Bluetooth antenna
- 1 x USB type A plug to micro plug cable
- 1 x RPi screws pack (2 pcs)
Quick specs
- Item Type
- HAT
- Compatibility
- Pi Series
- HAT Type
- GSM HAT, GPRS HAT
- Operating Temperature (°C)
- -40 to 85
- Cable Length
- 3
- Length (mm)
- 65



















