Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this multi-brand raspberry pi add on boards (hats) is a good fit for makers, students and electronics hobbyists. Main specs: item type HAT; compatibility Pi Series; hat type CAN HAT. Check that your power source supplies DC 8~28V, External Power Supply Range before connecting it.

Key Highlights

  • Item Type: HAT
  • Compatibility: Pi Series
  • HAT Type: CAN HAT

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeHAT
CompatibilityPi Series
HAT TypeCAN HAT
Expanded Interface2-Ch RS485 + 1-Ch CAN
CommunicationSPI
Can controllerMCP2515
Can transceiverSIT65HVD230DR/SN65HVD23D
Additional Specs.≦1Mbps
UART Expansion ChipSC16IS752
RS485 Baud Rate300~921600 bps
Power Supply Voltage (V)DC 8~28V, External Power Supply Range
Shipping Weight0.06 kg
Shipping Dimensions8 × 7 × 3 cm

Overview

The Waveshare Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections, made by WAVESHARE, is listed in our multi-brand raspberry pi add on boards (hats) range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: HAT
  • Compatibility: Pi Series
  • HAT Type: CAN HAT
  • Expanded Interface: 2-Ch RS485 + 1-Ch CAN (confirm your cable or board uses the same connector)
  • Communication: SPI
  • Can controller: MCP2515
  • Can transceiver: SIT65HVD230DR/SN65HVD23D
  • Additional Specs.: ≦1Mbps

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 And 1-Ch CAN, Multi Protections

Features: 

  1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi, series boards
  2. 1-Ch CAN adopt MCP2515 controller and CAN transceiver, converts SPI to CAN
  3. 2-Ch RS485 adopts SC16IS752+SP3485 dual-chip combination, converts SPI to RS485
  4. The onboard power conversion circuit supports an 8~28V wide voltage power supply and can power the Raspberry Pi at the same time
  5. Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal
  6. Onboard unibody digital isolation, for isolating the signal, reliable and jam-proof, low power consumption
  7. Onboard TVS (Transient Voltage Suppressor), effectively suppresses surge voltage and transient spike voltage in the circuit, lightning-proof & anti-electrostatic
  8. Onboard resettable fuse and protection diodes, ensures the current/voltage stable outputs, provide over-current/over-voltage proof, improve shock resistance
  9. Onboard 120Ω terminal resistor, configured by jumper
  10. Onboard terminals and pin headers make, a more convenient connection
  11. Breakout SPI control pins, for connecting with host control boards

Package Include:

1 x Waveshare Isolated RS485 CAN HAT (B) For Raspberry Pi, 2-Ch RS485 and 1-Ch CAN, Multi Protections

Quick specs

Item Type
HAT
Compatibility
Pi Series
HAT Type
CAN HAT
Expanded Interface
2-Ch RS485 + 1-Ch CAN
Communication
SPI
Can controller
MCP2515
See all specifications