
1 / 5 · Click to enlarge
AI Summary
A compact carrier board for the Raspberry Pi Compute Module 4 that matches the CM4 footprint and adds 40-pin GPIO, USB 2.0, MIPI CSI-2 and a microSD slot. Ideal for building very small CM4-based systems where space is limited.
Key Highlights
- Same footprint as the Raspberry Pi Compute Module 4
- 40-pin GPIO header for HATs and accessories
- USB 2.0 Type-A port for peripherals
- MIPI CSI-2 camera connector (15-pin FPC)
- microSD socket for CM4 Lite (no eMMC)
- 5V power input with PWR and ACT indicators
Ideal For
- Embedded developers building compact CM4 systems
- Makers creating space-constrained Raspberry Pi projects
- Product designers prototyping CM4-based devices
- Educators teaching embedded Linux with CM4
- IoT hobbyists needing a minimal CM4 carrier
Buying Tip
Confirm whether your Compute Module 4 has eMMC storage; if it does, you will not need the microSD slot, but if you use a CM4 Lite, this board provides the required card socket.
Elecvora expert review
Our verdict
The Waveshare Nano Base Board (A) is a focused carrier board that delivers exactly what many compact CM4 projects need: a small footprint with essential interfaces. It is well made and straightforward to use, though it lacks the extensive I/O of larger IO boards.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very compact, matching the CM4 size
- Includes 40-pin GPIO, USB 2.0 and CSI
- microSD slot supports CM4 Lite
- Clear power and activity indicators
Cons
- Only one USB port and no Ethernet
- Requires a separate 5V power source
- Compute Module 4 not included
Best for
Space-constrained CM4 projects needing basic I/O
Not ideal for
Users who need multiple USB ports, Ethernet or full-size IO board features
Specifications
| Item Type | Other Board |
|---|---|
| Compatibility | CM4 |
| Board Type | Baseboard |
| Supported | Socket for CM4 Variants |
| Connector Type | Raspberry Pi 40PIN GPIO interface × 1 |
| USB | USB 2.0 Type A interface × 1 |
| Camera Details | MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector) |
| Storage Capacity | Micro SD card socket for Compute Module 4 Lite (without eMMC) variants Power Input: 5V |
| Length (mm) | 5.5mm |
| Width (mm) | 4 |
| Weight (g) | 11 |
| Shipping Weight | 0.014 kg |
| Shipping Dimensions | 7 × 6 × 1 cm |
What's in the box
- 1 x Waveshare Nano Base Board (A) for Raspberry Pi Compute Module 4
Frequently Asked Questions
Is the Raspberry Pi Compute Module 4 included?
Which CM4 variants are supported?
What power input does the board require?
Can I connect a camera directly to this board?
Does the board have Ethernet or multiple USB ports?
What is the BOOT switch for?
Overview
The Waveshare Nano Base Board (A) is a carrier board built specifically for the Raspberry Pi Compute Module 4. Because the Compute Module 4 has no standard ports, a baseboard is required to break out its interfaces and provide power. This model is designed to be the same size as the CM4 itself, making it a practical choice for projects where the final assembly must stay as small as possible. It gives you the essential connectivity needed to develop, test and deploy CM4-based systems without adding unnecessary bulk.
Key Features
- Compact CM4-sized design – keeps your build tidy and space-efficient.
- 40-pin GPIO interface – connect HATs, sensors and custom electronics.
- USB 2.0 Type-A port – attach keyboards, mice, storage or other peripherals.
- MIPI CSI-2 camera port – 15-pin 1.0mm FPC connector for compatible camera modules.
- microSD card socket – supports CM4 Lite variants that do not include eMMC storage.
- Power and activity LEDs – PWR and ACT indicators for quick status checks.
- BOOT switch – useful for development and recovery workflows.
Specifications Explained
The board accepts a Compute Module 4 socket and is compatible with CM4 variants. The 40-pin GPIO header follows the Raspberry Pi pinout, so standard HATs and accessories can be used. The USB 2.0 Type-A port provides a single external USB connection, suitable for basic input devices or low-speed peripherals. The MIPI CSI-2 connector uses a 15-pin 1.0mm FPC cable, which is common for Raspberry Pi camera modules. The microSD socket is specifically for CM4 Lite modules without eMMC; if your CM4 has eMMC, you will not need this slot for storage. Power is supplied via a 5V input, and the onboard AMS1117-3.3 regulator provides the necessary voltage for the module and interfaces.
Compatibility and Requirements
This baseboard is compatible with the Raspberry Pi Compute Module 4. It supports CM4 variants and includes a microSD socket for CM4 Lite (without eMMC) versions. A 5V power source is required. The Compute Module 4 itself is not included and must be purchased separately. Camera modules and other accessories are also sold separately. Ensure that your CM4 variant matches your storage and interface needs.
Typical Uses
This carrier board is well suited to embedded projects, compact IoT devices, custom cameras, portable computing builds and prototyping where space is at a premium. It is also useful for developers who need a minimal CM4 setup for testing software or hardware before integrating the module into a final product.
What's in the Box
Package contents: 1 x Waveshare Nano Base Board (A) for Raspberry Pi Compute Module 4. The Compute Module 4, camera, power supply and other accessories are not included.
Quick specs
- Item Type
- Other Board
- Compatibility
- CM4
- Board Type
- Baseboard
- Supported
- Socket for CM4 Variants
- Connector Type
- Raspberry Pi 40PIN GPIO interface × 1
- USB
- USB 2.0 Type A interface × 1



















