
1 / 3 · Click to enlarge
AI Summary
This Waveshare HAT adds two M.2 NVMe SSD slots to your Raspberry Pi 5 via the PCIe interface. It supports 2230 to 2280 drives and enables high-speed storage or direct NVMe boot.
Key Highlights
- Dual M.2 NVMe slots for two SSDs on Raspberry Pi 5
- Supports 2230, 2242, 2260, and 2280 drive sizes
- PCIe Gen2 interface with up to 5Gbps data transfer
- Onboard PWR and ACT indicator LEDs for status
- HAT+ design with EEPROM and power monitoring chip
- Enables NVMe SSD booting for faster startup
Ideal For
- Raspberry Pi 5 owners needing extra storage
- Makers building media centres or NAS projects
- Developers requiring fast NVMe disk access
- Users wanting to boot the Pi 5 from SSD
- Enthusiasts building compact dual-drive setups
Buying Tip
Confirm your NVMe SSDs are the correct length (2230, 2242, 2260, or 2280) and that you have the necessary standoffs and screws for secure mounting.
Elecvora expert review
Our verdict
The Waveshare PCIe to 2-Channel M.2 Adapter Type B is a well-designed HAT for Raspberry Pi 5 users who need dual NVMe storage. It offers a clean integration with status LEDs and power monitoring, though it is limited to Gen2 speeds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Supports two NVMe SSDs simultaneously
- Wide range of M.2 drive sizes
- Onboard status LEDs and power monitoring
- HAT+ form factor with EEPROM
- Enables NVMe boot
Cons
- PCIe Gen2 only, not Gen3
- Requires separate NVMe SSDs
- Limited to Raspberry Pi 5
Best for
Raspberry Pi 5 users needing dual NVMe storage
Not ideal for
Those using other Raspberry Pi models or SATA M.2 drives
Specifications
| Compatibility | Pi 5 |
|---|---|
| HAT Type | NVMe |
| Slot Type | Designed for use with the PCIe interface on Raspberry Pi 5 |
| Memory Slot | Two M.2 NVMe slots |
| Board Size (mm) | 100 mm x 50 mm x 15 mm (L x W x H) |
| Supported | 2280 / 2260 / 2242 / 2230 Size NVMe Protocol |
| Data Transfer Rate | 5Gbps |
| Interface | Supports high-speed NVMe protocol for both M.2 SSDs, HDD/SSD SATA |
| Shipping Weight | 0.057 kg |
| Shipping Dimensions | 12 × 9 × 3 cm |
What's in the box
- 1 x Waveshare PCIe to 2-Channel M.2 Adapter Type B for Raspberry Pi 5
Frequently Asked Questions
Can I use two different sizes of NVMe SSD at the same time?
Does this adapter work with Raspberry Pi 4 or earlier models?
What is the maximum data transfer speed?
Can I boot the Raspberry Pi 5 from an SSD installed on this adapter?
What do the LEDs indicate?
Is the adapter compatible with SATA M.2 SSDs?
Overview
The Waveshare PCIe to 2-Channel M.2 Adapter Type B is an expansion board built specifically for the Raspberry Pi 5. It uses the Pi 5's PCIe interface to provide two M.2 NVMe SSD slots, allowing you to install two solid-state drives at once. This is useful when you need more storage than a microSD card can offer, or when you want faster read and write speeds for data-heavy projects.
The board is a HAT+ form factor and includes an onboard EEPROM chip, power monitoring circuitry, and status LEDs. It supports NVMe SSDs in 2230, 2242, 2260, and 2280 sizes, so you can choose from a wide range of commonly available drives.
Key Features
- Dual M.2 NVMe slots: Connect two NVMe protocol M.2 SSDs simultaneously through the Raspberry Pi 5 PCIe interface.
- Broad drive size support: Compatible with 2280, 2260, 2242, and 2230 form-factor NVMe SSDs.
- High-speed data transfer: Operates over PCIe Gen2 with a data transfer rate of up to 5Gbps.
- Status indicators: Onboard PWR LED stays on when powered, and the ACT LED blinks during read/write activity.
- HAT+ design: Includes an EEPROM chip and a power monitoring chip for real-time status tracking of the SSD.
- NVMe boot support: Allows the Raspberry Pi 5 to boot directly from an installed NVMe SSD.
Specifications Explained
PCIe Gen2 interface: The adapter uses the Raspberry Pi 5's PCIe connection in Gen2 mode, which provides up to 5Gbps of bandwidth. This is significantly faster than microSD storage and is suitable for everyday computing, media storage, and development work.
M.2 NVMe protocol: The slots are designed for NVMe protocol SSDs, not SATA-based M.2 drives. Make sure your SSD supports NVMe before installing.
Drive sizes: The board accommodates four common M.2 lengths: 2230, 2242, 2260, and 2280. This covers most consumer NVMe drives on the market.
Power monitoring: The onboard power monitoring chip lets you observe the operating status of the SSD in real time, which can help with troubleshooting or performance checks.
Compatibility and Requirements
This adapter is designed exclusively for the Raspberry Pi 5. It requires the Pi 5's PCIe interface and is not compatible with earlier Raspberry Pi models. You will need one or two NVMe protocol M.2 SSDs in a supported size. The board supports NVMe SSD booting, but you may need to configure your Raspberry Pi 5 accordingly.
Typical Uses
- Expanding storage for media servers, home automation, or data logging projects.
- Running a compact desktop setup with fast NVMe storage.
- Development environments that benefit from high-speed disk access.
- Dual-drive configurations for separating operating system and data.
What's in the Box
1 x Waveshare PCIe to 2-Channel M.2 Adapter Type B for Raspberry Pi 5.
Quick specs
- Compatibility
- Pi 5
- HAT Type
- NVMe
- Slot Type
- Designed for use with the PCIe interface on Raspberry Pi 5
- Memory Slot
- Two M.2 NVMe slots
- Board Size (mm)
- 100 mm x 50 mm x 15 mm (L x W x H)
- Supported
- 2280 / 2260 / 2242 / 2230 Size NVMe Protocol



















