Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this power adapters and cable is a good fit for makers, students and electronics hobbyists. Main specs: compatibility Pi 5; hat type Adapter HAT; interface PCI-E×1 Gen2.

Key Highlights

  • Compatibility: Pi 5
  • HAT Type: Adapter HAT
  • Interface: PCI-E×1 Gen2

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

CompatibilityPi 5
HAT TypeAdapter HAT
InterfacePCI-E×1 Gen2
SupportedRaspberry Pi 5B
Shipping Weight0.055 kg
Shipping Dimensions9 × 7 × 3 cm

Overview

The Waveshare PCIe To 2-ch M.2 Adapter for Raspberry Pi 5, Compatible with 2230/2242 Size NVMe Solid State Drive, Raspberry Pi 5 M.2 HAT, made by WAVESHARE, is listed in our power adapters and cable range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Compatibility: Pi 5
  • HAT Type: Adapter HAT
  • Interface: PCI-E×1 Gen2 (confirm your cable or board uses the same connector)
  • Supported: Raspberry Pi 5B (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.055 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 9 × 7 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The PCIe TO 2-CH M.2 HAT+ for Raspberry Pi 5 supports high-speed NVMe and M.2 solid-state drives in 2230/2242 sizes, only in Gen2 mode. It features onboard indicator lights, a power monitoring chip, and a HAT+ design with EEPROM. Designed for efficiency, it does not support booting from SSD on PI5. Note: This HAT does not support NVME startup by default.


Features:

  1. Support NVMe protocol and M.2 solid state drive protocol, high-speed read/write, with high work efficiency.
  2. PCI-E×1 only supports Gen2 mode.
  3. Only supports PI5B.
  4. Compatible with M.2 solid state drive of 2230/2242 sizes.
  5. Onboard working indicator lights, with PWR on continuously when powered, and ACT blinking during read/write.
  6. HAT+ design with onboard EEPROM chip.
  7. Onboard power monitoring chip, for real-time monitoring of the working status of the solid state drive.
  8. Do not support NVME SSD booting.

Package Includes:

1 x PCIe TO M.2 HAT+

1 x (2x20) Pin header

1 x 16P-Cable-40mm

1 x Screws pack

Quick specs

Compatibility
Pi 5
HAT Type
Adapter HAT
Interface
PCI-E×1 Gen2
Supported
Raspberry Pi 5B
Shipping Weight
0.055 kg
Shipping Dimensions
9 × 7 × 3 cm
See all specifications